页岩气开采钻井固体废物的污染特性

选取重庆某地区3个页岩气田作为研究对象,研究了5个钻井平台页岩气开采过程中废水基和油基钻井岩屑中重金属、多环芳烃（PAHs）和石油烃的污染特性.结果表明,两类钻井岩屑中Ba元素平均含量明显高于其他重金属,废水基钻井岩屑的重金属以Zn、Ba、Cr、Ni、Cu、Pb为主,废油基钻井岩屑中的重金属以Ni、Cu、Zn、Pb、Ba、As、Cr为主且Ni、Cu、Zn、Pb平均含量超过《危险废物鉴别标准毒性物质含量鉴别》（GB5085.6-2007）标准限值.废水基和油基钻井岩屑中PAHs的范围分别为1.74~14.8mg/kg和302~595mg/kg,均未超过GB5085.6-2007标准限值.废油基钻井岩屑石油烃含量为112~213g/kg,远超GB5085.6-2007标准限值.同时,废水基和油基钻井岩屑中BaP超过《土壤环境质量农用地土壤污染风险管控标准（试行）》（GB15618-2018）标准限值;废油基钻井岩屑中部分PAHs（BaP、BbF、BkF、DahA）浓度超过《土壤环境质量建设用地土壤污染风险管控标准（试行）》（GB36600-2018）中筛选值,岩屑中石油烃含量远超管制值.     

针铁矿强化剩余污泥与烟草废弃物厌氧发酵的研究

以剩余污泥和烟草废弃物为研究对象,探究了针铁矿对有机物厌氧消化产甲烷的影响.针铁矿投加能提高消化产气率至359.4mL/g,显著高于空白对照组.针铁矿有助于混合气体中甲烷含量的升高并减少CO₂的体积分数.针铁矿利于剩余污泥和烟草废弃物共消化过程有机物溶出,纤维素减量,从而为产甲烷古菌提供充足的消化底物.针铁矿利于酸化代谢过程,在针铁矿投加组中挥发性脂肪酸的最大产量仅为56.2mg/g,显著低于空白组,此外针铁矿促进丙酸的合成.针铁矿促进乙酸降解,在消化第1d,针铁矿投加实验组中乙酸降解率高达65.5%,较高于空白组中的56.6%.酶活性分析表明针铁矿促进水解,酸化及产甲烷过程关键酶.Methanothrix和Methanobacterium是产甲烷阶段重要微生物,454高通量测序表明针铁矿提高Methanothrix和Methanobacterium的相对丰度至59.6%和23.5%,显著高于空白对照组.     

炉渣与生物炭施加对稻田土壤铁还原菌群落结构及甲烷排放影响

为了探究炉渣及生物炭施加处理对稻田土壤铁还原菌群落结构及甲烷排放的影响,在福州某平原稻田中分别进行施加生物炭、炉渣、生物炭+炉渣3种处理,测定早、晚稻生长期稻田甲烷排放通量和可培养铁还原菌数量,并比较施加处理与不施加处理稻田土壤铁还原菌群落结构组成之间的差异.结果表明：废弃物施加能够改变稻田土壤铁还原菌数量,晚稻生物炭施加组的铁还原菌数量显著高于其他3组（P<0.05）;废弃物施加在一定程度上抑制了稻田土壤甲烷的排放,其中早稻混合施加组对甲烷排放的降低作用最为明显;福州平原稻田土壤中铁还原菌种类丰富,分布于10个门,其中厚壁菌门（Firmicutes）和变形菌门（Proteobacteria）为优势菌门相对丰度占比之和大于95%.共鉴定出20个属,其中相对丰度较高的菌属为芽孢杆菌属（Bacillus）、厌氧粘细菌属（Anaeromyxobacter）、梭状芽孢杆菌属（Clostridium）等10个属,占样品中已知铁还原菌属的62.07%~66.58%;生物炭和炉渣主要通过改变土壤pH值及含水量影响稻田土壤铁还原菌群落结构,混合施加的影响比单一施加更为显著;芽孢杆菌属（Bacillus）的相对丰度与稻田土壤甲烷的排放通量呈显著负相关,是稻田中抑制甲烷产生与排放的主要铁还原菌属.     

废弃硅钼棒循环再利用制备MoSi2 基抗氧化涂层

目的在实现钼资源循环再利用的同时,提高钼合金高温抗氧化性能。方法将废弃硅钼棒破碎、球磨制成粉末,并结合玻璃粉和硅粉作为原料,采用浆料法在钼基体上制备MoSi_2基抗氧化涂层。通过扫描电子显微镜、X射线衍射和1400℃静态等温氧化实验等分析涂层的微观组织、结构及抗氧化性能。结果制备的MoSi_2基抗氧化涂层厚度约500μm,涂层整体上呈现出相对致密的结构。在1400℃氧化20h后,涂层质量增量为5.88 mg/cm2,呈现出较好的防氧化效果。结论利用浆料法,以废弃硅钼棒为原料,在实现钼资源回收再利用的同时,为钼合金表面制备具有较好抗氧化性能的MoSi_2基抗氧化涂层。氧化过程中,涂层在表面形成了一层致密的SiO2玻璃,具有较强的阻氧能力,减少氧气向基体的渗入,可以在高温氧化环境有效提升钼基体的抗氧化能力。     

典型平原地区生活垃圾焚烧厂周边土壤重金属赋存形态分布特征及生物有效性评价

为考察并掌握典型平原地区生活垃圾焚烧厂周边土壤中重金属Cd、Cr、Cu、Pb、Ni和Zn的污染现状,以上海市某生活垃圾焚烧厂为例,研究其周边土壤中重金属赋存形态分布特征及生物有效性,采用Tessier连续提取法结合电感耦合等离子体发射光谱检测分析表层土壤中目标重金属总量及形态分布,并利用风险评估编码法（RAC）评价其生态风险水平.结果表明:研究区域土壤中Pb和Zn主要以Fe-Mn氧化物结合态和残渣态为主（>80%）;Cr、Cu和Ni则以残渣态为主（>60%）;Cd虽以残渣态为主（>50%）,但与其他重金属相比,其碳酸盐结合态占比相对较高.生物有效性分析结果显示,Cr、Cu和Ni以惰性态为主,生物有效性低,而潜在可利用态Cd、Pb和Zn占比较高,存在较高的释放风险.土壤中各重金属潜在生态风险水平由高到低依次为Cd > Zn > Pb > Cu > Ni > Cr,其中,Cu、Pb和Zn处于低风险水平,Cr和Ni处于无风险水平,而Cd处于中等风险水平.研究显示,该垃圾焚烧厂周边土壤中重金属已存在不同程度的污染累积,其中,潜在可利用态Cd的占比较高,已达中等风险水平,应引起重视.      

低温等离子体技术在乙烯装置VOCs治理中的应用

针对乙烯裂解装置污水会逸散出少量的VOCs气体,其苯系物及烯烃类物质含量高、恶臭明显、湿度大、浓度波动大,治理难度极大,所处环境为火灾爆炸危险区域且废气可能达到爆炸下限,安全控制措施要求高这一情况,建成了国内首套防爆型低温等离子体VOCs废气治理设施,在某石化公司防爆1区安全运行一年,实践证明:苯系物、烯烃、硫化物的去除效率可达98%以上,达到国标的各项要求,电气安全控制措施能够满足防爆1区。     

华南某市生活垃圾组成特征分析

依据城市生活垃圾采样分析方法对华南某市20个街镇生活垃圾的物理性质和物理组成进行历时一年的研究.结果表明,研究区域垃圾平均容重为0.22×103kg·m-3,垃圾三组分(水分、灰分和可燃物)所占比例分别为55.0%~66.9%、18.6%~30.3%、69.7%~81.4%,有机质含量比例为50.1%~58.0%,各研究区镇垃圾热值范围为6 570~9 652 k J·kg-1,平均热值为8 272 k J·kg-1,高于世界银行推荐的垃圾焚烧所需最低热值(7 000 k J·kg-1).其它物理组分所占比例分别如下:厨余类为39.8%~53.3%,橡塑类为16.5%~33.4%,纸类为5.61%~7.95%,纺织类为1.14%~5.16%,竹类为2.49%~5.12%,玻璃类为1.10%~1.47%,混合类5.86%~7.57%,灰土类2.46%~6.73%,金属0.1%~0.32%,陶瓷0.4%~0.69%.相关分析和主成分分析结果表明纺织类、橡塑类、纸类、可燃物比重对焚烧有促进作用,厨余类、玻璃类、容重、灰分、含水率、灰土等则对焚烧有一定的负影响.     

Sustainable management of demolition waste—an integrated model for the evaluation of environmental, economic and social aspects

A model is presented for evaluating waste management systems for their contribution to a sustainable development, including environmental, economic and social aspects. The model was tested in a case-study, where groups of long-term unemployed people were offered both education on environmental issues and practical work with the recovery and recycling of building and demolition waste as a form of vocational development. Application of the suggested model revealed the overall effects on sustainability of different methods of waste management. In addition, negative aspects of the systems analysed were identified, which led to discussions about possible improved practices within the waste management systems. Two of the waste management systems investigated (the recycling of steel and re-use of sanitary porcelain) showed a potential contribution to sustainable development in all of the aspects studied. Preparing bricks for re-use showed the largest potential for eco-efficiency, but had negative effects on sustainability from the social perspective of health and the working environment. The possibility of further use of the model and the remaining obstacles to such analyses are discussed. One observation is that the data collection needed to perform this kind of sustainability analysis is resource-demanding, and that it would therefore be better to identify a smaller number of key indicators.     

Application of micrometeorological approaches to measure methane exchange in a dry paddy field in the western coast of Korea

The exchange processes of CH₄ were investigated in a paddy field in the Hari area of Kang Hwa Island over an 8 day period in late April 2002. The quantification of CH₄ fluxes was made under dry field condition of early spring by concurrently measuring its concentrations (at the two heights of 1 and 5 m) and the relevant micrometeorological parameters. To help elucidate the factors determining the mobilization characteristics of CH₄, the results of our measurement data were examined using a number of approaches. The results of the trajectory analysis indicated that its concentration changed very sensitively with the influence of different source types, as seen from the air mass movement patterns. The concentrations and fluxes of methane, when examined over this short-term scale, showed moderately strong patterns across 24 h period in which higher values tend to occur during morning or evening. The overall results of our field measurements suggest that CH₄ exchange processes in the paddy area proceeded in a fairly complicated manner. The study area behaved as a net source of CH₄ to the atmosphere with a net daily emission rate of 3.6 mg m⁻² despite the fact that downward deposition was observed more frequently than upward emission.     

The application of the psychological contract to workplace safety

INTRODUCTION: Psychological contracts of safety are conceptualized as the beliefs of individuals about reciprocal safety obligations inferred from implicit or explicit promises. Although the literature on psychological contracts is growing, the existence of psychological contracts in relation to safety has not been established. The research sought to identify psychological contracts in the conversations of employees about safety, by demonstrating reciprocity in relation to employer and employee safety obligations. The identified safety obligations were used to develop a measure of psychological contracts of safety. METHOD: The participants were 131 employees attending safety training sessions in retail and manufacturing organizations. Non-participant observation was used to collect the data during safety training sessions. Content analysis was used to analyze the data. Categories for coding were established through identification of language markers that demonstrated contingencies or other implied obligations. RESULTS: Direct evidence of reciprocity between employer safety obligations and employee safety obligations was found in statements from the participants demonstrating psychological contracts. A comprehensive list of perceived employer and employee safety obligations was compiled and developed into a measure of psychological contracts of safety. A small sample of 33 safety personnel was used to validate the safety obligations. CONCLUSIONS AND IMPACT ON INDUSTRY: Implications of these findings for safety and psychological contract research are discussed.