Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

氨法烟气脱硫脱硝的技术特征

氨法烟气脱硫脱硝具有显著的技术优势:脱硫效率高,脱硫脱硝一举两得,不耗费热量不产生废渣,脱硫剂利用充分用量小,不损害设备有节能功效。脱硫剂利用率可达90%以上,脱硫效率可达90%以上、脱硝效率可达80%以上;脱硫剂用量是钙法工艺的十到二十分之一;副产物为可以直接利用的化学肥料,而非难于处置的废渣。     

炼油企业固体废弃物的防治

就炼油企业固体废物产生的数量和主要种类进行了分析和总结，对目前的防治进行了论述，并提出了对固废进一步减量化、资源化、无害化管理和治理的途径。     

废塑料与炼焦配煤共焦化产物的分析

利用2kg模拟焦炉，进行了首钢炼焦配煤与北京市石景山区生活垃圾中的废塑料的共焦化实验。研究结果表明，添加废塑料有提高焦油收率和减少水的收率的趋势；但添加废塑料对成焦率、焦油产率及水产率的影响随废塑料处理方法和废塑料添加比例的不同而有差异；采用废塑料型煤或废塑料型煤破碎物与配煤共焦化在提高废塑料添加比例方面具有较大优势。     

复合催化氧化技术对油气田压裂返排液的处理研究

酸化压裂作业废水是石油天然气生产过程中的主要污染源,它的污染成份复杂,有害物质浓度高,特别是含有胍胶和表面活性剂等高分子物质,具有高COD、高稳定度、高粘度的特点.本文通过对压裂液的来源、水质特征、治理现状等常用方法的分析,确定了物理化学脱稳,过滤、O3/H2O2复合催化氧化、深度氧化的达标治理工艺路线.经过处理后的压裂液澄清透明,达到国家二级排放标准(GB8978-96).     

焦化厂工业废水制备水煤浆的研究

研究了用焦化厂三种工业废水制备水煤浆并与自业水制备的水煤浆的性能进行了比较，结果表明，用三种工业废水可以制备出性能较好的水煤浆，而且，某些废水制出的水煤浆在性能上，特别是稳定性上好于用自来水制出的水煤浆。     

上海生活垃圾资源化产业的发展探讨

概述了国内外生活垃圾资源化利用的现状，对上海生活垃圾资源化利用状况和问题作了分析，探讨了垃圾资源化利用的价值和实现途径，提出了促进上海生活垃圾资源化产业发展的几点建设。     

乙烯废碱液综合治理技术探讨

分析了乙烯裂解气碱洗过程所排放废液的组成及性质，讨论了该废液的除油方法及综合治理和利用的途径。     

甲硫醚废气制取二甲基亚砜技术研究

选择双氧水作氧化剂，将具有恶臭气味的涕灭威生产的副产物甲硫醚氧化成无臭的二甲基亚砜。通过实验，优化了工艺条件，减少了安全隐患，提高了二甲基亚砜的产率，消除了恶臭污染。     

催化燃烧法处理炼油污水处理场臭气

介绍了污水处理场臭气来源、危害和影响，从技术、经济和环境效益等方面对几种处理方法进行了比较，提出了采用催化燃烧法的技术实施方案。