耐冷菌在低温下处理污水的研究进展

低温污水的生物处理一直是水处理领域的难点和热点,由于耐冷菌对温度的适应范围较宽,且在低温下仍然保持较高的代谢活性,因此在污水处理和污染环境生物修复领域中的应用逐渐受到重视。本文介绍了耐冷菌在环境中的分布、主要种类以及适冷机理,概述了耐冷菌在工业废水和生活污水处理中的主要研究进展。指出应进一步开发环境中耐冷菌菌种资源,揭示耐冷菌的冷适应特性和功能表达之间的关系,加强耐冷菌在水体修复与净化领域的理论和应用研究,从而为我国北方尤其是东北地区的水环境保护提供行之有效的新途径。     

钢铁企业固体废弃物资源化利用浅析

固体废物做到资源化即通过综合利用,使有利用价值的固体废物变废为宝,实现资源的再循环利用,是固体废物污染控制一直努力方向。钢铁联合企业生产过程中产生的固体废弃物量大、面广,如对其进行资源化利用不仅可获得好的效益,同时也解决了环保难题。通过借鉴国内外钢铁企业固体废弃物资源化利用成功技术,使我们在开展环境影响评价工作中对钢铁企业固废的资源化利用提出一些切实可行的控制措施。     

污水处理厂产泥量与进水水质关系的研究

为研究阜阳污水处理厂近几年来污泥产量与进水水质之间的关系,对自2007年1月份以来的产泥量与进水水质的基础数据进行了整理．并通过建立各个数据之间的相互关系图表来分析产泥量与进水水质之间的关系。     

榆神矿区矿井水零排放可行性分析

针对榆神矿区给排水现状,分析矿区给排水关系和矿井水的利用途径,并提出矿井水零排放的技术、管理对策,达到减少新水索取,实现零排放.     

我国垃圾分类现状及对策建议

分析目前我国垃圾分类回收中存在的问题,阐述垃圾分类回收处理的必要性和相关对策建议。     

聚硅酸对不同形态铝沉积行为的影响

针对给水管网中残余铝沉积和再溶解现象可能引起的水质问题,研究了聚硅酸对不同水解聚合形态铝沉积、再溶解的影响,并以石英微晶天平为表征手段,初步探讨了聚硅酸对不同形态铝沉积、再溶解过程影响的机理.结果表明,聚硅酸能显著改变不同水解聚合形态铝的沉积、再溶解行为.聚硅酸可与3种水解聚合形态的铝迅速结合而生成可沉积产物,但产物性质不同.以单体形态为主的Al_0与聚硅酸的反应产物性质较稳定,部分以溶解态存在,部分以非溶解态(可沉积态)存在;尽管铝的两种聚合形态Al_(13)和Al_(30)与聚硅酸反应也生成了部分可沉积产物,但随着时间的推移,这些产物又逐渐向溶解态转化.铝硅比对Al_0体系中铝的沉积溶解行为影响较小,而对Al_(13)和Al_(30)影响较大,且在0.2∶20(以Al和SiO_2计的质量比)时,沉积态铝的溶解速率最快.     

富营养化水体中黑水团的吸收及反射特性分析

对黑水团水体光学特性进行研究,是利用遥感技术监测和评估黑水团事件的前提.针对2015年7月在太湖发生的黑水团现象,采集了太湖黑水团区(区域一)、蓝藻水华区(区域二)、清水区(区域三)共36个水样,对这3个区域的水体遥感反射率以及吸收特性进行对比分析.结果表明:1区域一水体的总颗粒物、色素颗粒物和非色素颗粒物吸收系数比区域二、区域三高出1~2倍,在400~500 nm之间,区域一CDOM吸收系数相比另外两个区域的水体高出2倍左右.导致黑水团区域水体具有很低的遥感反射率,被人眼感知时呈现为黑色;2黑水团区域水体M值低于滇池、巢湖和太湖的M值变化范围,说明黑水团中CDOM的腐殖酸含量较高.此外,叶绿素a浓度与CDOM在350 nm处吸收系数之间具有很好的相关性,表明蓝藻的降解可能是黑水团中CDOM的一个主要来源;3在380 nm之后,黑水团区域的水体总吸收以色素颗粒物占主导,但在短波350~380 nm处,CDOM对总吸收的贡献率高于色素颗粒物和非色素颗粒物.     

Efficacy of two chemical coagulants and three different filtration media on removal of Aspergillus flavus from surface water

Aquatic fungi are common in various aqueous environments and play potentially crucial roles in nutrient and carbon cycling as well as interacting with other organisms. Species of Aspergillus are the most common fungi that occur in water. The present study was undertaken to elucidate the efficacy of two coagulants, aluminum sulfate and ferric chloride, used at different concentrations to treat drinking water, in removing Aspergillusflavus, as well as testing three different filtration media： sand, activated carbon, and ceramic granules, for their removal of fungi from water. The results revealed that both coagulants were effective in removing fungi and decreasing the turbidity of drinking water, and turbidity decreased with increasing coagulant concentration. Also, at the highest concentration of the coagulants, A. flavus was decreased by 99.6% in the treated water. Among ceramic granules, activated carbon, and sand used as media for water filtration, the sand and activated carbon filters were more effective in removing A.flavus than ceramic granules while simultaneously decreasing the turbidity levels in the test water samples. Post-treatment total organic carbon （TOC） and total nitrogen （TN） concentrations in the experimental water did not decrease; on the contrary, TN concentrations increased with the increasing dosage of coagulants. The filtration process had no effect in reducing TOC and TN in tested water.     

Evaluation of accuracy of linear regression models in predicting urban stormwater discharge characteristics

Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.