A new approach to assessment and management of the impact from medical liquid radioactive waste

The Swedish regulations concerning disposal of clinical radioactive waste are currently under revision and a graded approach is proposed for risk limitation purposes. To assist the revision procedures, a screening study was performed to estimate public exposures from liquid releases from hospitals to public sewers. The results showed that doses to sewage workers were above the dose constraint of 100muSva(-1) especially for (131)I and (99m)Tc. Hence, a dynamic model, LUCIA, was developed for realistic assessments in which radionuclide transportation in sewers was modelled. Probabilistic simulations were performed to obtain probability distributions of radionuclide concentrations in sludge. Concurrently, estimates of the effective doses to sewage workers decreased significantly and were below 10muSva(-1) except for (111)In and (131)I. However, the Kd-coefficients representing the partition of radioactivity between water and sludge in sewers are highly uncertain for (111)In. As shown by sensitivity studies, these values are the major determinant of the exposures in sewers.     

Current Status of Manufacturing Hazardous Waste in Shanghai

Abstract

It is difficult to manage the manufacturing hazardous waste (MHW) which is generated from a huge amount of complicated sources and causes very serious pollution. Therefore more and more attention has been paid to MHW pollution. Shanghai, as an industrial and economic center and an international metropolis in China, has a vast industrial system spanning a multitude of sectors, which generates MHW not only in a huge magnitude but also in a large variety of types from complicated sources, resulting in severe pollution. In 2003, the production of MHW in Shanghai is about 3.96 × 10⁵ ton, involving 33 indices. Most of MHW in Shanghai is treated and disposed of, but a significant portion is not handled properly and effectively. This paper carries out in-field investigation on the current status of MHW production and treatment in Shanghai, and puts forward scientific proposals that Shanghai should facilitate cleaner production and minimize hazardous waste; strictly enforce hazardous waste registration system, strengthen monitoring the certified enterprises; strengthen intent disposal center construction and realize hazardous waste reclamation; accelerate establishing the technical criteria and the management policy, promote the research and development on the treatment and disposal technology, and strengthen information management, thus realizing integrated management on MHW pollution.     

A choice experiment analysis for solid waste disposal option: a case study in Malaysia

In Malaysia, most municipal wastes currently are disposed into poorly managed 'controlled tipping' systems with little or no pollution protection measures. This study was undertaken to assist the relevant governmental bodies and service providers to identify an improved waste disposal management strategy. The study applied the choice experiment technique to estimate the nonmarket values for a number of waste disposal technologies. Implicit prices for environmental attributes such as psychological fear, land use, air pollution, and river water quality were estimated. Compensating surplus estimates incorporating distance from the residences of the respondents to the proposed disposal facility were calculated for a number of generic and technology-specific choice sets. The resulting estimates were higher for technology-specific options, and the distance factor was a significant determinant in setting an equitable solid waste management fee.     

Valorization of solid waste in sugar factories with possible applications in India : A review

Sugar production is a major agro-based industry in India that generates various solid wastes viz. sugarcane trash, bagasse, press mud and bagasse fly ash. This work examines the state-of-the-art in innovative value added products that can be obtained from the transformation of these wastes. Challenges in implementing these waste valorization solutions are also highlighted. It is observed that the extent of research and adoption of these solutions vary considerably. Both industry involvement as well as government encouragement is required in translating the research findings into commercial products.     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

Recovery of biomass wastes by hydrolysis in sub-critical water

The recovery of waste substances is important not only for the prevention of environmental issues, but also for the rational utilization of natural resources. Hydrolysis reaction in sub-critical water is a promising method for the treatment of organic wastes and has been attracting worldwide attention. In this paper, sub-critical water hydrolysis was employed as a method for producing amino acids, reducing sugars, bio-oil and gas fuels from biomass wastes. The current statuses of these useful chemicals production from biomass wastes by hydrolysis in sub-critical water were reviewed. The review indicates that sub-critical water hydrolysis can be an efficient process for recovering useful chemicals from biomass wastes. This method is renewable, sustainable, efficient, and safe for the environment.     

FSILP: fuzzy-stochastic-interval linear programming for supporting municipal solid waste management

Although many studies on municipal solid waste management (MSW management) were conducted under uncertain conditions of fuzzy, stochastic, and interval coexistence, the solution to the conventional linear programming problems of integrating fuzzy method with the other two was inefficient. In this study, a fuzzy-stochastic-interval linear programming (FSILP) method is developed by integrating Nguyen's method with conventional linear programming for supporting municipal solid waste management. The Nguyen's method was used to convert the fuzzy and fuzzy-stochastic linear programming problems into the conventional linear programs, by measuring the attainment values of fuzzy numbers and/or fuzzy random variables, as well as superiority and inferiority between triangular fuzzy numbers/triangular fuzzy-stochastic variables. The developed method can effectively tackle uncertainties described in terms of probability density functions, fuzzy membership functions, and discrete intervals. Moreover, the method can also improve upon the conventional interval fuzzy programming and two-stage stochastic programming approaches, with advantageous capabilities that are easily achieved with fewer constraints and significantly reduces consumption time. The developed model was applied to a case study of municipal solid waste management system in a city. The results indicated that reasonable solutions had been generated. The solution can help quantify the relationship between the change of system cost and the uncertainties, which could support further analysis of tradeoffs between the waste management cost and the system failure risk.     

Solid waste management in European countries: a review of systems analysis techniques

In the past few decades, solid waste management systems in Europe have involved complex and multi-faceted trade-offs among a plethora of technological alternatives, economic instruments, and regulatory frameworks. These changes resulted in various environmental, economic, social, and regulatory impacts in waste management practices which not only complicate regional policy analysis, but also reshape the paradigm of global sustainable development. Systems analysis, a discipline that harmonizes these integrated solid waste management strategies, has been uniquely providing interdisciplinary support for decision making in this area. Systems engineering models and system assessment tools, both of which enrich the analytical framework of waste management, were designed specifically to handle particular types of problems. Though how to smooth out the barriers toward achieving appropriate systems synthesis and integration of these models and tools to aid in the solid waste management schemes prevalent in European countries still remains somewhat uncertain. This paper conducts a thorough literature review of models and tools illuminating possible overlapped boundaries in waste management practices in European countries and encompassing the pros and cons of waste management practices in each member state of the European Union. Whereas the Southern European Union (EU) countries need to develop further measures to implement more integrated solid waste management and reach EU directives, the Central EU countries need models and tools with which to rationalize their technological choices and management strategies. Nevertheless, considering systems analysis models and tools in a synergistic way would certainly provide opportunities to develop better solid waste management strategies leading to conformity with current standards and foster future perspectives for both the waste management industry and government agencies in European Union.     

Sustainable recycling model: A comparative analysis between India and Tanzania

Higher economic growth in developing countries has caused higher amounts of wastes. Local government authorities in these countries usually fail to provide adequate services to dispose the increasing amounts of waste, resulting in threats for both the population and environment health. There is therefore an urgent need for recycling as a form of waste management in order to stop the devastating effects of solid waste in developing countries. Using a qualitative method of analysis, this study presents a model to measure and rank the sustainability of recycling programs in India and Tanzania. The model consists of six main constructs including “production, economic, governmental, social, technological, and international factors”. The results showed that India outperforms Tanzania in sustainable recycling programs: per capita waste generated per day in Delhi is higher than in Dar es Salaam; the government of India focuses more on developing recycling plans and techniques as compared to the government of Tanzania where the country is not actively involved in the recycling process; and the solid waste management planning in India is being performed better than Tanzania.     

Household organic waste composting using bins with different types of passive aeration

The objective of this study was to study the performances of six 200-L polyethylene bins, each with different design for passive aeration to organic wastes composting. Food scraps and dry leaves (1.6 kg) were added to each bin once a day until the bin was full. Temperatures at the middle portion were measured daily. The compost from each bin was taken once a week for 120 days for analysis of C, N, volatile solids, and a germination index once a week for 120 days. After 120 days, the compost sample from each bin was taken to determine the mass reduction, size distribution, CEC, N, P and K values. The results showed that the temperatures inside the bins were in the ranges of 24 °C-57 °C. The composts in all bins were found to be stable at around 56-91 days. The wastes decayed fastest in bins with lateral and vertical systems of natural ventilation. It took about two months to stabilize the organic wastes, with a 59-62% decrease of mass. The C/N ratio, CEC, N, P, and K values of the final composts were 14.8-16.0, 66-68 cmol/kg, and 1.26-1.50% N, 0.52-0.56% P₂O₅ and 1.66-1.92% K₂O, respectively.