Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.     

Screening analysis of volatile organic contaminants in commercial inorganic coagulants used for drinking water treatment

A method for quality screening is suggested to detect volatile impurities in inorganic coagulants that are used for drinking water treatment. Static headspace gas chromatography with mass spectrometry detection (HS–GCMS) is sensitive and selective to detect volatiles in low concentrations. This study has discovered that volatile organic impurities are detectable in ferric and aluminium-based coagulants which are used for drinking water treatment. For ferric chloride, 2-propanol was detected at a level of 17–24 μg ml⁻¹, acetone at 0.7–1.7 μg ml⁻¹, 1,1,1-trichloroacetone at 0.02–0.04 μg ml⁻¹, trichloromethane at 0.01–0.02 μg ml⁻¹ and toluene at 0.01–0.12 μg ml⁻¹. For ferric chloride sulfate, acetone was detected at a level of 0.12 μg ml⁻¹, 1,1,1-trichloroacetone at 0.06–0.08 μg ml⁻¹, trichloromethane at 0.13–0.23 μg ml⁻¹, bromodichloromethane at 0.04–0.06 μg ml⁻¹ and dibromochloromethane at 0.04–0.05 μg ml⁻¹. For aluminium hydroxide chloride, only trichloromethane was detectable, but below the method detection limits (MDL). Although the concentrations of these impurities in commercial coagulants are low, this observation is important and should have impact on water industries for them to pay attention to the chemicals they are using for drinking water production.     

浅谈新疆风电场水土保持措施配置——以新疆华电小草湖风电场二场一期工程为例

风能作为一种清洁无污染的可再生能源,已经被广泛运用到电力事业的发展中来。近年来,新疆的风力发电发展迅速,风电场建设过程中不可避免地会对土壤及植被造成一定的破坏,人为地加剧了水土流失。概述了风电项目水土流失特点,以新疆华电小草湖风电场工程为例,结合项目区具体特点,分区设置防治措施。通过工程措施、植物措施与临时措施的有机结合,有效地防止水土流失。     

人工神经网络方法在拟建小区域环境质量评价中的应用

人工神经网络的评价方法用于小区域环境质量评价中,根据本地区特点因地制宜地选择环境质量参数,代入模型中进行环境质量评价及预测,对用于环境质量评价的BP人工神经网络模型进行了改进,即对网络模型的训练样本进行了扩充,从而提高了模型的抗干扰能力和准确性.将改进了的BP人工神经网络模型应用于四川省资阳市沱江二桥拟建项目小区域的大气、地表水环境质量评价中, 对该市小区域大气、地表水环境质量状况进行评价,评价结果表明,BP人工神经网络模型用于环境质量评价是可行的,且评价结论客观,评价模型普遍适用.     

江河水源地突发性水污染事故风险评价

近年来,我国江河饮用水水源地突发性水质污染事故频发,成为我国面临的最严重的环境问题之一.江河水源地突发性水质污染事件的风险评价是确保饮用水源地水质安全的重要手段,对突发性水质污染事故,采取适当的应急处理措施.     

紫外光度法测定地表水中石油类的油标选择

精选了一种新油标。采用这种油标,可使紫外分光光度法测地表水中石油类的令人满意,省工省时。     

中国21世纪城市供水新概念--分质供水

结合我国城市一直使用的统一给水方式已与当前水资源紧缺,用水多样化,人们饮用水质质化的状况极不适应的情况,提出对传统的给水方式进行改革的最适宜方式是分质供水。     

超临界水氧化技术处理含油污水研究

在间歇式实验装置上对超临界水氧化技术处理含油污水进行了研究,主要考察了COD的脱除率与反应时间、温度和压力的关系。实验结果表明,超临界水中的氧化反应能有效去除污水中COD,反应时间、反应温度是影响COD脱除率的重要因素。     

原子荧光光谱法同时测定环境水体中痕量锡和锌

采用原子荧光光谱法同时测定环境水样中痕量锡和锌,优化了试验条件。锡在1.00μg/L～10.0μg/L、锌在20.0μg/L～200μg/L范围内线性良好,方法检出限锡为0.13μg/L,锌为1.76μg/L,锡和锌标准溶液测定的相对标准偏差分别为2.9%和4.0%,环境水样加标回收率锡为96.4%～106%,锌为92.0%～111%。