聚硅酸对不同形态铝沉积行为的影响

针对给水管网中残余铝沉积和再溶解现象可能引起的水质问题,研究了聚硅酸对不同水解聚合形态铝沉积、再溶解的影响,并以石英微晶天平为表征手段,初步探讨了聚硅酸对不同形态铝沉积、再溶解过程影响的机理.结果表明,聚硅酸能显著改变不同水解聚合形态铝的沉积、再溶解行为.聚硅酸可与3种水解聚合形态的铝迅速结合而生成可沉积产物,但产物性质不同.以单体形态为主的Al_0与聚硅酸的反应产物性质较稳定,部分以溶解态存在,部分以非溶解态(可沉积态)存在;尽管铝的两种聚合形态Al_(13)和Al_(30)与聚硅酸反应也生成了部分可沉积产物,但随着时间的推移,这些产物又逐渐向溶解态转化.铝硅比对Al_0体系中铝的沉积溶解行为影响较小,而对Al_(13)和Al_(30)影响较大,且在0.2∶20(以Al和SiO_2计的质量比)时,沉积态铝的溶解速率最快.     

富营养化水体中黑水团的吸收及反射特性分析

对黑水团水体光学特性进行研究,是利用遥感技术监测和评估黑水团事件的前提.针对2015年7月在太湖发生的黑水团现象,采集了太湖黑水团区(区域一)、蓝藻水华区(区域二)、清水区(区域三)共36个水样,对这3个区域的水体遥感反射率以及吸收特性进行对比分析.结果表明:1区域一水体的总颗粒物、色素颗粒物和非色素颗粒物吸收系数比区域二、区域三高出1~2倍,在400~500 nm之间,区域一CDOM吸收系数相比另外两个区域的水体高出2倍左右.导致黑水团区域水体具有很低的遥感反射率,被人眼感知时呈现为黑色;2黑水团区域水体M值低于滇池、巢湖和太湖的M值变化范围,说明黑水团中CDOM的腐殖酸含量较高.此外,叶绿素a浓度与CDOM在350 nm处吸收系数之间具有很好的相关性,表明蓝藻的降解可能是黑水团中CDOM的一个主要来源;3在380 nm之后,黑水团区域的水体总吸收以色素颗粒物占主导,但在短波350~380 nm处,CDOM对总吸收的贡献率高于色素颗粒物和非色素颗粒物.     

太原晋祠地区果园土壤呼吸的年际变化及其温度敏感性

太原晋祠地区曾经是著名的稻米之乡,随着晋祠泉的断流,区内土地利用从之前的以水稻田为主转变为以玉米和果园为主.因此,研究土地利用变化后土壤呼吸对于准确估算区域碳循环具有一定意义.基于此目的,本研究以原来为稻田、现为果园利用方式的样地为对象,对其土壤呼吸进行了7 a(2006~2012年)、每月1~3次的定位观测,分析了土壤呼吸的年际、季节变化及其与环境因子年际、季节变化的关系.结果表明,土壤呼吸与土壤温度的季节变化与天数的关系可以用3参数高斯方程模型进行拟合.土壤呼吸的季节变化与土壤温度的季节变化关系为极显著的指数关系,但其与土壤水分季节变化的关系不显著.土壤呼吸速率年平均值为(5.32±3.31)μmol·(m~2·s)-1;碳通量年平均值为1 690.2 g·m-2,在1 294.0~2 006.0g·m~(-2)之间变化,年际均值差异不显著.土壤呼吸的温度敏感性指数(Q_(10))值的年际变化以5、10和15 cm温度测定深度计算分别在1.54~2.20、1.68~2.48和1.82~2.46之间;土壤温度10℃对应的土壤呼吸(R_(10))值的年际变化在2.37~2.81、2.43~3.13和2.59~3.47μmol·(m~2·s)-1之间;Q_(10)和R10值均随土壤温度测定深度增加而增加.Q_(10)的年际变化与10 cm深度的土壤温度(T_(10))的年际变化关系极显著(P=0.016),与其它因子的关系不显著;在拟合方程中增加土壤水分因子不能提高对Q_(10)年际变化的预测精度,说明在本样地水分对Q_(10)的影响较小.R10值的年际变化与环境因子的年际变化关系不显著.与土壤呼吸与土壤温度的单因素模型相比,土壤温度和土壤水分的双变量指数模型可以提高预测土壤呼吸季节变化的准确性.研究结果可以为本地区及同类地区的土壤呼吸估算提供一定参考.     

Efficacy of two chemical coagulants and three different filtration media on removal of Aspergillus flavus from surface water

Aquatic fungi are common in various aqueous environments and play potentially crucial roles in nutrient and carbon cycling as well as interacting with other organisms. Species of Aspergillus are the most common fungi that occur in water. The present study was undertaken to elucidate the efficacy of two coagulants, aluminum sulfate and ferric chloride, used at different concentrations to treat drinking water, in removing Aspergillusflavus, as well as testing three different filtration media： sand, activated carbon, and ceramic granules, for their removal of fungi from water. The results revealed that both coagulants were effective in removing fungi and decreasing the turbidity of drinking water, and turbidity decreased with increasing coagulant concentration. Also, at the highest concentration of the coagulants, A. flavus was decreased by 99.6% in the treated water. Among ceramic granules, activated carbon, and sand used as media for water filtration, the sand and activated carbon filters were more effective in removing A.flavus than ceramic granules while simultaneously decreasing the turbidity levels in the test water samples. Post-treatment total organic carbon （TOC） and total nitrogen （TN） concentrations in the experimental water did not decrease; on the contrary, TN concentrations increased with the increasing dosage of coagulants. The filtration process had no effect in reducing TOC and TN in tested water.     

Evaluation of accuracy of linear regression models in predicting urban stormwater discharge characteristics

Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

乌鲁木齐水污染现状与防治对策研究

本文将对乌鲁木齐地区水污染的现状、水污染的主要因素以及水污染的途径加以描述和分析,并提出可行的防治措施.     

焦化行业苯并芘排放量与厂界达标预测分析

论文以某100万吨/年焦化项目为例,分析其在不同地形和风速参数条件下苯并芘排放量,预测不同条件下距离焦炉炉体中心-1000～1000米范围内各网格点的苯并芘超标概率,最终得出风速、地形参数对苯并芘浓度超标概率的影响.     

多级过滤技术在汽车工业废水处理尾水回用中的应用

某大型汽车厂设计采用多级过滤技术对工业废水处理尾水进行深度处理,再生后的中水回用于工业循环冷却水系统。介绍了多级过滤工艺的系统组成、工艺原理及处理效果。实际运行情况表明:采用多级过滤技术处理汽车工业废水处理后的尾水,系统运行稳定,出水水质良好,满足GB/T 19923—2005《再生水用作冷却用水的水质控制标准》的要求。     

上海某饮用水源地不同形态氮的时空分布研究

在2010~2012年进行的上海某水源地水质监测资料的基础上,应用纳氏试剂分光光度法等分析方法研究该水源地2011年1~10月总氮、氨氮、硝酸盐氮、亚硝酸盐氮等不同形态的氮素在水体中的空间分布规律及时间变化规律。并就其氮的来源、迁移转化机理和对氮的迁移转化有较大影响的因素进行研究和分析,得出该水库水体中各种形态氮以硝酸盐氮为主,平均占总氮的71.6%,氨氮及亚硝酸盐氮各占总氮的4.39%及0.95%;水体中的温度、光照条件、溶解氧、点位位置分布、水深等是影响各氮形态含量与分布的重要环境因子。