天然石材产品放射性水平及其防护管理

简介了我国天然石材产品中放射水平、分类控制使用的现状以及应用天然石材装饰室内所致辐射对人体健康产生的不良影响，提出了加强对天然石材产品使用过程中的监督、监测和管理的建议。     

平顶山市湛河水污染现状及防治对策

以“九五”期间平顶山市湛河水质例行监测结果为依据，分析了湛河水污染现状、特征及原因，并提出综合性湛河污染防治对策。     

亚铵法制浆造纸厂中段废水处理技术分析研究

通过对采用两级气浮做预处理 ,生物硫化床串联接触氧化做深度处理的治理技术的分析研究 ,结合废水处理工程实例 ,说明了用两级串联气浮 +硫化床 +接触氧化工艺处理造纸中段水技术切实可靠 ,该治理工艺对处理亚铵法麦草制浆造纸中段废水有较强的针对性和可行性。     

B-P网络应用于地下水水质监测点优选

以地下水水质评价分级标准作为训练样本,构造B-P网络模型对其进行训练,用训练好的B-P网络对某地的地下水水质监测点进行评判、优选。并与其它方法的结果进行比较,结果表明,B-P网络用于环境测点优选不仅原理直观,而且具有较好的客观性和实用性。     

测定电镀废水中铬(Ⅵ)的新光度法

在硝酸介质中,二甲基黄先显色而后在加热条件下褪色,铬( )能显著阻抑此褪色反应,且阻抑程度与铬( )含量相关,据此建立了测定痕量铬( )的新方法。方法检出限是1.55×10-10g/ml,线性范围0.1～1.2μg/10ml,用于电镀废水中铬( )的测定,结果满意。     

A ten year summary of concurrent ambient water column and sediment toxicity tests in the Chesapeake Bay watershed: 1990-1999

The goal of this study was to identify the relative toxicity ofambient areas in the Chesapeake Bay watershed by using a suiteof concurrent water column and sediment toxicity tests at seventy-five ambient stations in 20 Chesapeake Bay rivers from1990 through 1999. Spatial and temporal variability was examinedat selected locations throughout the 10 yr study. Inorganicand organic contaminants were evaluated in ambient water andsediment concurrently with water column and sediment tests toassess possible causes of toxicity although absolute causalitycan not be established. Multivariate statistical analysis wasused to develop a multiple endpoint toxicity index (TOX-INDEX) at each station for both water column and sediment toxicity data. Water column tests from the 10 yr testing period showed that49% of the time, some degree of toxicity was reported. The mosttoxic sites based on water column results were located inurbanized areas such as the Anacostia River, Elizabeth River andthe Middle River. Water quality criteria for copper, lead,mercury, nickel and zinc were exceeded at one or more of thesesites. Water column toxicity was also reported in localizedareas of the South and Chester Rivers. Both spatial and temporalvariability was reported from the suite of water column toxicitytests. Some degree of sediment toxicity was reported from 62% of the tests conducted during the ten year period. The ElizabethRiver and Baltimore Harbor stations were reported as the most toxic areas based on sediment results.Sediment toxicity guidelines were exceeded for one or more of thefollowing metals at these two locations: arsenic, cadmium,chromium, copper, lead, nickel and zinc. At the Elizabeth Riverstations nine of sixteen semi-volatile organics and two of sevenpesticides measured exceeded the ER-M values in 1990. Ambientsediment toxicity tests in the Elizabeth River in 1996 showedreduced toxicity. Various semi-volatile organics exceeded the ER-M values at a number of Baltimore Harbor sites; pyrene anddibenzo(a,h)anthracene were particularly high at one of thestations (Northwest Harbor). Localized sediment toxicity was alsoreported in the Chester, James, Magothy, Rappahannock, andPotomac Rivers but the link with contaminants was not determined.Both spatial and temporal variability was less for sedimenttoxicity data when compared with water column toxicity data. Acomparison of water column and sediment toxicity data for thevarious stations over the 10 yr study showed that approximatelyhalf the time agreement occurred (either both suite of testsshowed toxicity or neither suite of tests showed toxicity).     

水中呋喃丹气相色谱-质谱的测定方法研究

建立了气相色谱-质谱联用法测定水中呋喃丹的方法。用二氯甲烷萃取酸性水样中的呋喃丹,浓缩后加入内标苊-d10,采用气-质联用仪中选择离子检测(SIM)模式进行监测,提取目标化合物的特征离子进行定量,该方法灵敏度高,水中呋喃丹的最低检测浓度可达0.05μg/L;准确度好,样品添加回收率在100.5%-111.0%之间;平行5次进行精密度试验,相对标准偏差低于6.21%。结果表明,方法简便、快速、准确、重现性好,适合各种水中呋喃丹的测定。     

C OD在线分析仪比对中应注意的问题

分析了COD在线分析仪和实验室比对结果人为差异的原因是样品不均匀,在线分析仪取样装置滤过,取样层面和采样方式以及沉淀消除的方法不同造成的.提出应在相同的地点、层面和同一容器取样,用相同沉淀消除方法去除样品中氯离子干扰,保证两方法比对中使用水样的一致均匀,使测试结果正确可信.     

Prediction of Leachate Level in Kimpo Metropolitan Landfill Site by Total Water Balance

Kimpo metropolitan landfill has received various kinds of wastessince January 1992. The leachate level was measured to be 10.3 m in May 1995 and the level increased to 12.2 m in August 1996. Therefore, to prove the reason for the increasing leachate level, we calibrated hydraulic conductivity of each waste andintermediate layer using the HELP (Hydrologic Evaluation ofLandfill Performance) model. The leachate generation data measured from February 1993 to October 1995 was used in the model calibration. As a result of a model calibration, we obtained anaverage infiltration ratio and used this in analysis of the total water balance to predict elevation of leachate level. Main causes of the elevation of the leachate level were the high water content of the waste and the degradation of the leachate-drainage system caused by the subsidence of a naturalbarrier layer.     

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.