Biofiltration and disinfection codetermine the bacterial antibiotic resistome in drinking water: A review and meta-analysis

• Published data was used to analyze the fate of ARGs in water treatment. • Biomass removal leads to the reduction in absolute abundance of ARGs. • Mechanism that filter biofilm maintain ARB/ARGs was summarized. • Potential BAR risks caused by biofiltration and chlorination were proposed. The bacterial antibiotic resistome (BAR) is one of the most serious contemporary medical challenges. The BAR problem in drinking water is receiving growing attention. In this study, we focused on the distribution, changes, and health risks of the BAR throughout the drinking water treatment system. We extracted the antibiotic resistance gene (ARG) data from recent publications and analyzed ARG profiles based on diversity, absolute abundance, and relative abundance. The absolute abundance of ARG was found to decrease with water treatment processes and was positively correlated with the abundance of 16S rRNA (r² = 0.963, p<0.001), indicating that the reduction of ARG concentration was accompanied by decreasing biomass. Among treatment processes, biofiltration and chlorination were discovered to play important roles in shaping the bacterial antibiotic resistome. Chlorination exhibited positive effects in controlling the diversity of ARG, while biofiltration, especially granular activated carbon filtration, increased the diversity of ARG. Both biofiltration and chlorination altered the structure of the resistome by affecting relative ARG abundance. In addition, we analyzed the mechanism behind the impact of biofiltration and chlorination on the bacterial antibiotic resistome. By intercepting influent ARG-carrying bacteria, biofilters can enrich various ARGs and maintain ARGs in biofilm. Chlorination further selects bacteria co-resistant to chlorine and antibiotics. Finally, we proposed the BAR health risks caused by biofiltration and chlorination in water treatment. To reduce potential BAR risk in drinking water, membrane filtration technology and water boiling are recommended at the point of use.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

高效液相色谱-三重四级杆/复合线性离子阱质谱法测定饮用水中22种邻苯二甲酸酯

建立了一种同时测定饮用水中22种邻苯二甲酸酯(PAEs)的高效液相色谱-三重四级杆/复合线性离子阱质谱方法:饮用水样品经针头过滤器过滤,选用Biphenyl液相色谱柱进行分离,以含0.1%甲酸的水溶液和含0.1%甲酸的甲醇溶液为流动相,电离模式为电喷雾正离子,选用多反应监测触发增强子离子扫描模式进行检测。结果表明,22种PAEs的灵敏度良好,定量限为0.001～0.1 μg/L。配制浓度为0.1～100.0 μg/L的混标溶液进行进样分析,分析结果显示,22种PAEs在该范围内的线性关系良好,相关系数均大于0.995,方法的平均回收率为82.9%～108.9%,相对标准偏差为0.9%～11.2%。同时,使用增强子离子扫描谱图进行搜库匹配,定性准确性高。该方法适用于饮用水中PAEs的检测。     

联网激光雷达的观测性能综合平行比对

激光雷达以其高精度的探测能力在大气污染研究中得到了广泛应用。由于生产厂家和反演算法等的差异,激光雷达观测数据的质量参差不齐。笔者利用2013年11月和2014年3月2种不同型号激光雷达(高频激光雷达和微脉冲激光雷达) 532 nm波段的气溶胶消光系数和气溶胶自动观测网(AERONET)光学厚度数据,对2部雷达在不同空气质量下的观测性能进行综合对比。结果表明:2部雷达在不同空气质量条件下探测效果不同,空气质量为优和良时,2部雷达的消光系数比较一致,偏差主要在1 km以下;随着污染加剧,2部雷达在1 km以下的偏差先减小后增大,1 km以上的偏差随高度增大。与AERONET的光学厚度相比,高频激光雷达在轻度污染和严重污染时相对误差较小(3. 23%和26. 75%);微脉冲激光雷达在良和轻度污染时相对误差较小(40. 00%和25. 81%)。2部雷达设备的差异和重污染时不利的气象条件是影响雷达表现的重要原因。该研究作为全国激光雷达联网的前期工作,为全国激光雷达数据的综合应用提供了参考。     

长三角空气质量区域预报准确性评估方法研究

根据长三角空气质量区域预报工作的实际需要,对分区文字预报和落区图预报两种方式分别制定了不同的空气质量指数级别预报准确性评估方法。分区文字预报根据设定的预报准确性判定方法计算预报评分,落区图预报按区域内预报准确城市占比进行准确率统计。分区文字预报结果显示,2017年长三角区域的预报准确天数占比为62.2%,预报评分为70.2,区域预报评估效果良好。落区图预报评估结果显示,预报级别偏差具有地域性差异,安徽北部、江苏北部和江西中北部预报等级偏高,长三角中南部沿海城市预报等级偏低。该套评估方法可为区域空气质量预报偏差成因分析提供依据,为区域预报工作的改进提供定量参考。     

饮用水源微生物快速检测技术的发展及应用

微生物是威胁饮用水安全的首要问题,水环境微生物快速检测技术的开发和应用是推动饮用水源微生物快速检测和水质安全预警技术发展的保障。随着对水质微生物污染快速检测和准确预警新要求的提出,水环境中微生物在线检测和预警技术得到了越来越多的开发和应用。笔者总结了水环境常见微生物检测方法和技术的发展,重点讨论了饮用水源微生物快速检测技术的发展和应用,根据各项技术的应用和推广使用程度,将其归纳为常用快速检测技术、潜在适用快速检测技术和新型快速检测技术等类别,并详细阐述了一些应用较广的技术,以期为构建水质微生物污染早期预警系统提供参考。     

基于VB6.0的供水管网震害预测方法和软件

为了提高供水管网震害预测的效率,修订了现有供水管网震害预测模型,应用Visual Basic 6.0软件平台,开发了供水管网震害预测软件。震害预测软件提供了两方面的预测功能,分别为不同地震烈度下供水管段基于三态的破坏等级预测和供水管网基于五态的破坏等级预测。软件实现了批量供水管段及整个管网的震害预测,且可以进行管网在设定地震下的震害预测,提高了预测效率。经算例分析,验证了软件的可靠性。     

环境空气质量自动监测站的管理与维护

随着工业化、城镇化的深入推进,二氧化硫、氮氧化物、烟粉尘和挥发性有机物等各类污染物排放到环境中,致使中国大气受到严重污染,给人体的健康、动植物的生长、发育和繁殖等带来负面的影响。为实时监测环境空气质量,建立环境空气质量自动监测站逐渐成为大气污染防治的主要手段。文中以环境空气质量自动监测站为研究对象,提出环境空气质量自动监测站管理与维护面临的问题,探讨相应的解决措施,以期为环境空气质量自动监测站的管理与维护提供参考依据。     

基于ZIF-L的微固相萃取技术测定地表水中痕量典型多环芳烃

制备类沸石咪唑酯骨架ZIF-L材料,将其用作微固相萃取吸附剂,处理水中萘、苊、苊烯、芴、菲、蒽、荧蒽、芘等8种痕量典型多环芳烃,再用HPLC测定。试验表明,ZIF-L对上述多环芳烃的萃取效率明显高于商品化萃取材料C 18和多壁碳纳米管。方法在0.100μg/L^200μg/L范围内线性良好,方法检出限为0.02μg/L^0.03μg/L,标准溶液5次测定结果的RSD为4.7%~9.5%,实际水样加标回收率为84.5%~115%。将该方法用于北太湖5个点位水样的测定,测定值为未检出~3.40μg/L。     

二噁英类物质CALUX报告基因法在造纸行业的应用探究

选择典型造纸厂,采用化学激活报告基因法(CALUX)测定造纸过程中废水和纸浆中的二噁英类物质,并将部分样品测定结果与高分辨气相色谱-高分辨质谱(HRGC-HRMS)法测定结果作线性回归,换算系数为0.21,表明CALUX可用于造纸行业废水中二噁英类物质的快速筛查。将CALUX用于测定造纸厂废水中二噁英类物质,结果表明用含元素氯的漂白工艺会产生大量二噁英类物质,其中漂白废水中的目标物毒性当量浓度最高,经处理后可达到国家排放标准;而用无元素氯的漂白工艺,二噁英类物质的产生量会大幅降低。