Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.     

WATER RESOURCES AND HUMAN HEALTH: THE VIEWPOINT OF MEDICAL GEOGRAPHY1

ABSTRACT: Medical geography studies both areal patterns of human health and disease and the environmental and cultural factors that contribute to such conditions. In such studies water resources are of major importance, not only because they are essential for life and their scenic beauty is of inspirational value, but also because they are involved, directly or indirectly, in more than 80 percent of all disease. The direct involvements result from various disease causing agents sometimes found in surface or ground water organic ones such as bacteria, worms, etc., which are known as pathogens, and inorganic ones such as trace elements and synthetic toxic chemicals. Surface waters may have indirect effects also, for they may serve as habitats or breeding places for organisms that do not themselves cause human disease but that serve as vectors or hosts for such pathogens. This paper will discuss these various roles of water resources in both endemic and epidemic disease occurrences and ways in which various human activities domestic, economic, recreational, or religious — increase or reduce our exposure to such diseases.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu^2 +, Cr^3 +, and V^3 + ions were prepared via a modified sol–gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250–400°C. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2 +- and Cr^3 +-containing catalysts showed 100% conversion at 300°C and 350°C, V^3 +-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

Investigation of physico-chemical properties and microbial community during poultry manure co-composting process

Co-composting of poultry manure and rubber wood sawdust was performed with the ratio of 2:1(V/V) for a period of 60 days. An investigation was carried out to study the extracellular enzymatic activities and structural degradation utilizing Fourier transform infrared spectroscopy(FT-IR), thermogravimetry and differential thermal analysis(TG/DTA)and scanning electron microscopy(SEM). The microbial succession was also determined by using denaturing gel gradient electrophoresis(DGGE). The compost was able to reach its highest temperature of 71°C at day 3 and stabilized between 30 and 40°C for 8 weeks.CMCase, FPase and β-glucosidase acted synergistically in order to degrade the cellulosic substrate. The xylanase activities increased gradually during the composting and reached the peak value of 11.637 U/g on day 35, followed by a sharp decline. Both Li P and Mn P activities reached their peak values on day 35 with 0.431 and 0.132 U/g respectively. The FT-IR spectra revealed an increase in aromaticity and a decrease in aliphatic compounds such as carbohydrates as decomposition proceeded. TGA/DTG data exhibited significant changes in weight loss in compost samples, indicating degradation of organic matter. SEM micrographs showed higher amounts of parenchyma exposed on the surface of rubber wood sawdust at day 60, showing significant degradation. DGGE and 16 S r DNA analyses showed that Burkholderia sp., Pandoraea sp., and Pseudomonas sp. were present throughout the composting process. Ornithinibacillus sp. and Castellaniella ginsengisoli were only found in the initial stage of the composting, while different strains of Burkholderia sp. also occurred in the later stage of composting.     

不同载体材料对厌氧氨氧化效果影响的研究

文章分别采用水性聚氨酯(WPU)和活性炭2种材料作为生物载体,在2个不同的上流式厌氧污泥床(UASB)反应器中接种包埋污泥和生物活性炭,采用人工配水进行连续实验,观测厌氧氨氧化反应器启动过程中各种含氮化合物的变化,以考察不同载体材料对厌氧氨氧化过程的影响。文章在生物活性炭反应器中成功驯化了采自污水处理厂的普通厌氧污泥,证明了从环境中驯化培养厌氧氨氧化菌的可能性。通过2个阶段中脱氮效率的比较,发现以水性聚氨酯包埋材料作为未驯化细菌载体并无明显优势,反而成为传质的障碍;而采用生物活性炭则可以迅速达到提高局部生物量、聚集功能菌、屏蔽不利环境的干扰等作用,是理想的微生物载体。     

The Role of Organic Matter in Natural Aquatic Systems: Analytical Constraints

The dissolved organic matter in aquatic systems consists of a heterogeneous mixture of compounds with wide ranging chemical properties and diverse origins. the presence of organic matter (OM) in surface and ground waters has important implications with regard to the mobility and therefore fate of many potential organic and inorganic pollutants. the majority of the analytical approaches in current use require exhaustive pre-treatment steps which may lead to the formation of artefacts within the sample. an analytical technique based upon gel permeation chromatography is proposed as a more reliable procedure for the characterisation of naturally occurring dissolved organic matter.     

聚氨酯泡沫固定化产碱杆菌细胞生物转化氰化物

利用1株产碱杆菌DN25作为降氰菌株,以聚氨酯泡沫为载体进行固定化,研究其转化特性.结果表明,采用吸附生长法能有效实现菌株DN25的固定,固定细胞量可达到每g泡沫载体生物量干重0.35g.固定化细胞的最适转化温度和pH为35℃、8.0.对于低浓度氰化物,固定化细胞和游离细胞的转化速率相当;对于高浓度氰化物,固定化细胞具有明显优势,不仅可耐受更高浓度的氰化物转化,其转化速率也高于游离细胞,最大转化速率为507mg/(L·h),是游离细胞的2.8倍.通过初步的摇瓶模拟序列批式反应,固定化细胞活性可保持20d.     

矿用聚氨酯注浆材料阻燃及加固性能研究

为获得压缩强度和阻燃性能兼顾的聚氨酯注浆材料,通过L9(34)正交试验,研究Mg(OH)2含量、甲基膦酸二甲酯(DMMP)含量、异氰酸酯指数、辛酸亚锡含量对聚氨酯注浆材料的阻燃性能及压缩性能的影响。获得这种聚氨酯注浆材料的最佳制备条件。对比分析最佳制备条件试样及不加阻燃剂试样的热稳定性。结果表明:DMMP含量和Mg(OH)2含量对平均燃烧时间影响显著;Mg(OH)2还有补强加固作用,对压缩强度影响最为显著,其次为异氰酸酯指数。在Mg(OH)2,DMMP,辛酸亚锡质量分数分别为16%,24%和0.4%,异氰酸酯指数为1.10时,聚氨酯注浆材料兼顾阻燃性能和压缩性能,平均燃烧时间为13.9 s,压缩强度为19 MPa,其热稳定性明显优于不添加阻燃剂样品。     

基于层次分析法的热塑性聚氨酯及其纳米复合材料火灾危险性综合评价

聚合物的火灾危险性与热、烟、毒的释放密切相关,但采用不同指标对材料的评价结果不一致。以纳米级蒙脱土(MMT)、氢氧化铝(ATH)和聚磷酸铵(APP)为添加剂的热塑性聚氨酯(TPU)纳米复合材料为研究对象,选取其在静态管式炉、稳态管式炉和锥形量热仪中的相关实验数据,以HCN总浓度作为特殊毒性危害指标,CO和CO_2浓度为一般毒性危害指标,以热释放速率峰值、平均热释放速率、总热释放量为热危害指标,以产烟速率峰值、生烟总量为烟危害指标。进一步细分了火灾烟气中不同毒性气体对于火灾风险的影响,并运用层次分析法计算指标权重,综合评价了热塑性聚氨酯及其复合材料的火灾危险性。结果表明,当添加量为6 wt%聚磷酸铵、3 wt%氢氧化铝与3 wt%蒙脱土时,此时复合材料的火灾危险最低,证明了综合热、烟、毒三个层次来降低聚合物材料火灾危险性是可行的。     

人工接种堆肥和自然堆肥微生物区系与分子多态性的变化

采用传统培养方法和PCR-DGGE技术研究了人工接种堆肥和自然堆肥微生物群落的演变过程。结果表明:(1)传统培养方法显示,两种堆肥堆制过程中微生物数量均呈“升高—降低—升高—降低”变化趋势,整个堆肥过程中细菌数量占优势。(2)DGGE图谱显示,两种堆肥不同时期存在不同的细菌种群,其条带数量亦呈“升高—降低—升高—降低”变化趋势。堆肥升温期条带丰富但优势条带不明显;堆肥高温期条带数量减少但出现优势条带,表明高温阶段以嗜热菌或耐高温菌为主;堆肥降温期条带数量再次增多;堆肥腐熟期条带数量少且无优势条带,表明腐熟阶段微生物种群数量少且代谢强度趋于平缓。(3)DGGE图谱表明,人工接种菌株成为堆肥高温期优势菌株。人工接种增加了堆肥中微生物总量,提高了堆肥微生物种群多样性,并且促进了堆肥菌群演替,从而缩短堆肥腐熟时间。