棉田生态系统中钾元素的施用效益研究

新疆滴灌棉花施用钾肥,灰漠土平均增产9 1%,草甸土平均增产6 6%。在适宜的氮磷肥条件下,灰漠土滴灌棉花最佳施钾量为94 5kg/hm2;草甸土滴灌棉花最佳施钾量为64 5kg/hm2。每公顷钾肥用量增加1kg,灰漠土棉株体内全钾含量提高0 006029%;草甸土棉株提高0 004457%。钾肥施用方法以基施配合滴施最佳。     

超声-双氧水和亚铁离子体系处理含酚废水研究

在实验装置上对超声-双氧水和亚铁离子体系联合处理含酚废水进行了实验研究。主要考察了废水初始pH值、初始双氧水浓度、超声功率、反应时间等因素对酚去除率的影响。实验结果表明：超声辐射可以在双氧水和亚铁离子体系氧化过程中起加速反应的作用，而且随着超声功率的增大，加速反应的能力增强；实验条件下废水初始pH值为4～6．8，初始双氧水浓度为140mg／L时酚去除效果最佳；超声-双氧水和亚铁离子体系处理含酚废水过程中苯酚的降解规律符合表现一级反应。     

尿中氚水和总氚的分析测定

用蒸馏-液闪法和氧化蒸馏-液闪法分别测量了氚污染人员尿中的氚水浓度和总氚(氚水和有机氚)浓度。根据72个高于本底水平的尿中氚水和总氚浓度分析比较，认为在氚内污染工作人员的尿中，有机氚与氚水的浓度比值为(5.4 3.7)％。     

夹点技术--一种有效的清洁生产方法

夹点技术作为一种有效的清洁生产措施可用于能源优化、资源节约、废物减量及污染防治等方面，能收到良好的经济效益和环境效益。本文介绍夹点技术的基本原理、应用研究领域及其发展趋势。     

长庆油田水处理新技术研究

长庆油房庄油田水经过处理后仍具有较高的矿化度、较多的悬浮物及残留油,同时其SRB严重超标。现场处理水质不稳定,在进行回注时与地层的配伍性较差。针对这些情况,研究了一种新型的水处理工艺技术。对成垢离子调整剂、水质净化剂和成垢离子钝化剂进行了筛选,并对含油污水的成垢离子含量及比例进行了调整。运用这种技术,使油房庄油田水经处理后达到回注水的标准,且提高了与地层的配伍性。同时提出了新型水处理技术的工艺流程。     

抚顺石化公司硫磺回收装置的扩建和改造

抚顺石化分公司石油三厂原有硫磺回收装置的处理能力已经不能满足生产的需要,2002年对硫磺回收装置进行了扩建和改造。该装置采用了一段高温转化、二级催化转化的克劳斯工艺,采用揝SR敾乖?吸收工艺处理尾气。扩能改造后,新增的尾气处理能力与硫磺回收能力相配套,排放的废气符合国家现行的环保标准。该装置工艺路线合理、可靠,硫回收率高。     

烟气脱硫喷淋塔的容积负荷与本体设计

提出了以喷淋塔的容积负荷——平均容积吸收率为控制指标的本体设计路线。在目前已有的设计、运行经验基础上，根据烟气的SO2进口浓度、要求的吸收效率等来确定喷淋塔容积。讨论了容积吸收率不同角度的定义，给出了采用容积吸收率进行喷淋塔本体设计的步骤。     

改进型石灰混凝法去除城市污水二级出水中有机物的研究

将石灰混凝处理后的沉淀泥渣进行回流，对石灰混凝法进行改进，研究改进后的石灰混凝法对城市污水二级出水中有机物的去除效果。结果表明，活性泥渣回流有利于提高石灰混凝法对城市污水二级出水中有机物的去除。回流位置在石灰投加前、复合絮凝剂投加后，最佳回流量为新泥渣产生量的100％～200％，活性泥渣回流的最佳pH为11．0～11．5；活性泥渣中CaCO3、Mg(OH)2、Fe(OH)3等沉淀物以及有机高分子絮体均有助于提高其对有机物的去除效果，其中Mg(OH)2沉淀物起主导作用；含循环泥渣的活性污泥回流，对有机物的去除效果无明显影响。     

Exploiting Abstract Possibilities: A Critique of the Concept and Practice of Product Patenting

Developments in biotechnology and genomics have moved the issue of patenting scientific and technological inventions toward the center of interest. In particular, the patentability of genes of plants, animals, or humans and of genetically modified (parts of) living organisms has been discussed, and questioned, from various normative perspectives. This paper aims to contribute to this debate. For this purpose, it first explains a number of relevant aspects of the theory and practice of patenting. The focus is on a special and increasingly significant type of patents, namely product patents. The paper provides three general arguments against the concept and practice of product patenting. The first argument briefly considers the claim that patents are legitimate because they promote socially useful innovation. Against this claim, it is argued that product patents may hamper rather than promote such innovation. The second and main argument concludes that product patents are not adequately based on actual technological inventions, as they should be according to the usual criteria of patentability. The principal moral issue is that product patents tend to reward patentees for inventions they have not really made available. The final argument proposes a method for patenting the heat of the sun. Assuming that granting this patent will be generally considered absurd, the argument exposes a further, fundamental problem of the concept and practice of product patenting.     

Environmental assessment of supercritical water oxidation of sewage sludge

Environmental aspects of using supercritical water oxidation (SCWO) to treat sewage sludge were studied using a life cycle assessment (LCA) methodology. The system studied is the first commercial scale SCWO plant for sewage sludge in the world, treating sludge from the municipal wastewater treatment facility in Harlingen, TX, USA. The environmental impacts were evaluated using three specific environmental attributes: global warming potential (GWP), photo-oxidant creation potential (POCP) and resource depletion; as well as two single point indicators: EPS2000 and EcoIndicator99. The LCA results show that for the described process, gas-fired preheating of the sludge is the major contributor to environmental impacts, and emissions from generating electricity for pumping and for oxygen production are also important. Overall, SCWO processing of undigested sewage sludge is an environmentally attractive technology, particularly when heat is recovered from the process. Energy-conserving measures and recovery of excess oxygen from the SCWO process should be considered for improving the sustainability potential.