Intelligent power supply management of an autonomous hybrid energy generator

ABSTRACT

This work deals with the optimization of an hybrid energy system used to supply an isolated site. The proposed system combines a wind turbine, a photovoltaic panel, a diesel generator and a battery bank to electrify atypical home. An energy cost-effectiveness approach is adopted in accordance with meteorological data, time profile of energy consumption, and the cost of different alternative systems. A variety of performances is obtained through simulations within the Homer Pro environment. The selection of an optimal combination is based on the maximum integration of renewable energy in the suggested system with a minimum of gas emission. According to the obtained results, the overall cost of the selected installation is about 72,900 €, with 0.415€ the unit cost of a kWh electric energy provided with a contribution of renewable energy of around 86%. Simulations show a technical and financial benefits of the different configurations obtained to supply the target site. To control the proposed hybrid energy system, a supervision algorithm is developed and implemented on TMS320F28027 DSP platform. The proposed energy system aims to take advantages of renewable energy sources and shift to conventional sources only when necessary in order to ensure source autonomy and service continuity.     

风蚀扬尘抑尘剂效率测试方法与应用

风蚀扬尘抑尘剂是一种控制风蚀扬尘的有效措施,探讨使用便携式风洞(PI-SWERL)测试风蚀扬尘抑尘剂效率的方法,并对比国内外2种抑尘剂对风蚀扬尘PM2. 5的抑制效率,以研究喷洒方式、稀释倍数和风速对抑尘效率的影响.结果表明:①按照推荐的稀释倍数分别配置G和Enviroseal(ES)抑尘剂水溶液并测试,液滴喷洒方式对应的抑尘效率优于雾化喷洒方式,在17. 2 m·s~(-1)(相当于8级风)风速时G抑尘剂效率(99. 5%)优于ES抑尘剂(94. 0%)和水(77. 5%);②对稀释倍数为50、100、150、200和400倍的G抑尘剂进行测试,在17. 2 m·s~(-1)风速时,抑尘效率分别为99. 7%、99. 5%、99. 7%、98. 1%和95. 9%,可根据抑尘效率变化拐点确定抑尘剂最佳成本效益稀释倍数;在13. 1～17. 2 m·s~(-1)风速范围内,抑尘效率随风速增加而增加.③使用便携式风洞测试风蚀扬尘抑尘剂效率的方法,可以量化抑尘剂对风蚀扬尘PM2. 5的抑制效率,建议对风蚀扬尘抑尘剂开展抑尘有效期和环境友好性测试.     

烟气同时脱硫脱硝技术探讨

开发先进的烟气治理技术,控制二氧化硫和氮氧化物排放是国内外脱硫脱硝研究的一大热点。本文简述了同时脱硫脱硝技术的工作机理及其优缺点,从反应机理、技术特点和工程应用等方面,介绍了烟气同时脱硫脱硝技术的研究进展情况,并对其应用前景进行了预测。     

Movement distances enhance validity of predictive models

Including the distance species are able to move in predictive models improves conservation practice. Bird inventory projects carried out from 1993 to 2004 in Taiwan provide an opportunity to investigate the relationships among species distribution, movement distance, and the environment. We compared projected distributions of 17 Taiwanese endemic bird species using what we called the Standard Method (i.e. movement distance is zero) and what we called the Buffer Method (i.e. movement distance is longer than zero) in three presence-only models (GARP, MAXENT and LIVES). The Standard Method used species original occurrence records directly while the Buffer Method expanded the occurrence of species to areas 1 km² around each recorded location. We first tested the efficacy of the Buffer Method using ten common species of the 17, and then applied the method to two rare species of the 17. For both the common and rare species, the distributions predicted by the two methods showed slight but important differences. The Buffer Method for all species had a higher average predictive probability, while the Standard Method had a higher maximum predictive probability. Most of the values for the area under the curve (AUC) were over 0.8 with the exceptions of Taiwan Barbet (Megalaima nuchalis) and Taiwan Hwamei (Garrulax taewanus), which have recently separated from Indochinese Barbet (Megalaima annamensis) and Chinese Hwamei (Garrulax canorus), and since 2008 and 2006 have been regarded as species endemic to the study area. Kappa values showed good performance for all species using both methods. The Buffer Method, however, resulted in significantly higher sensitivity and accuracy values for all models of species (p < 0.05). We conclude that when modeling species distribution including the area where the species was censused along with areas within the minimum movement areas better defines the surrounding areas that might supplement core habitat requirements. Therefore, using the Buffer Method, species surrounding distribution can be obtained which provides a better understanding of the species distributions. Given that distribution size is a key to the conservation of species, we suggest the Buffer Method can be used in conservation planning.     

矿井通风系统稳定性定量判定方法研究

稳定的矿井通风系统是实现矿井安全高效生产的前提,但是随着采掘工作面的推进,通风网络结构的变化,巷道的冒顶变形等,通风系统的稳定性也随之变化.基于矿井通风系统稳定性的重要性、非线性和时变性,运用Lyapounov(李雅普诺夫)稳定性理论和灵敏度,提出了定量分析判定矿井通风系统稳定性的方法.方法以Lyapounov稳定性分...     

大型渡槽结构动力学研究进展

大型渡槽是灌区生命线工程中的关键性建筑物,其在地震及风载作用下的安全性已是渡槽建设的瓶劲,也是国内外研究的热点。渡槽结构的抗震、减震和抗风技术的核心是渡槽结构动力学的问题,而渡槽结构动力学系属流固耦合(FSI)系统的动力学范畴。在已有研究的基础上,首先对渡槽结构FSI系统模型的研究进行了总结和评述;然后简述了渡槽结构动力特性和响应的求解技术以及抗震、隔震、减震与抗风技术的研究概况;最后总结了渡槽结构动力学的研究进展,提出了该学科进一步研究的内容和方法。     

基于重要抽样法的耐压球壳可靠性计算方法研究

目的 解决耐压球壳极小失效概率的可靠性计算问题。方法 在自适应Kriging的基础上,结合重要抽样法提出耐压球壳可靠性计算方法。该方法在较大失效概率下构建的Kriging模型基础上获得重要方向,在重要方向上计算得到较低失效概率下的设计点,以设计点为中心,构建小失效概率的Kriging模型,并通过此模型采用重要抽样法开展可靠性计算。结果 分别使用提出的重要抽样法和蒙特卡洛法计算了2个算例的失效概率,计算结果表明,该方法具有较高的精度和效率。使用该方法对某耐压球壳工作载荷下的失效概率进行了计算,计算得到该球壳失效概率为4.094×10^–96。结论 研究结果可为无失效方程下极低失效概率的可靠性计算问题提供参考。     

掘进面出风口风流与风幕调控下的粉尘分布响应曲面优化研究*

为了解决煤矿掘进面风筒出风口参数不能动态变化,而传统风幕全断面控尘效果不理想引起的粉尘浓度高等问题,通过分析风幕和出风口参数对粉尘分布规律的影响,以此得到合理的出风口风流与风幕综合调控方案,降低粉尘浓度。以陕西神木柠条塔煤矿N1212巷道为研究对象,利用Fluent软件建立出风口风流与风幕综合调控的粉尘场有限元模型,设计出风口风流及风幕综合调控响应曲面实验,得到最佳综合调控方案为:风幕射流出口宽度为0.16 m,风幕射流出口速度为6 m/s,出风口口径为0.9 m,出风口右偏角度为3°。搭建相似模拟实验平台来验证最佳综合调控方案,研究结果表明:调控后回风侧行人呼吸处和司机位置处粉尘平均浓度分别降低89%和81%,有效改善掘进面作业环境。     

云南气象灾害的时空分布规律

云南主要的气象灾害有旱灾、洪灾、冷灾、雹灾、风灾和雷灾等6类,它们造成的经济损失超过地震灾害和地质灾害,是云南最大的自然灾害.6种主要气象灾害有明显的时空分布特征.旱灾区主要集中在滇东北、滇东、滇北和滇中地区;洪灾区主要集中在滇东北、滇东南、滇南和滇西南地区;冷灾区主要分布在滇东北、滇西北、滇东和滇中地区;雹灾区主要分布在滇东北、滇东、滇南、滇西北以及滇中局部地区;风灾区主要集中在滇东北、滇南地区;雷灾区主要集中在滇南、滇东南及滇北局部地区.旱灾以春季和初夏最为严重,洪灾主要出现在夏季和秋季,冷灾主要出现在冬春季和夏季,雹灾主要出现在春季和夏季,风灾主要出现在春季和夏季,雷灾主要出现在夏季和春季.     

成果管理的政策导向刍议

从成果管理的政策导向必须是领导行为、成果管理的政策导向作用必须贯穿于管理的全过程、成果管理的政策导向作用是成果管理的原动力等方面探讨了成果管理的导向问题，从而提出了成果管理导向的参考做法。