Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

Physical Modeling of Emissions from Naturally Ventilated Underground Parking Garages

The dispersion of pollutants from naturally ventilated underground parking garages has been studied in a boundary layer wind tunnel. Two idealized model setups have been analysed, one was simulating pollutant dispersion around an isolated rectangular building and one was representing dispersion in a finite array of idealized building blocks. Flow and dispersion close to modelled ground level emission sources was measured. The results illustrate the complexity of the flow around buildings and provide insight in pollutant transport from ground level sources located directly on building surfaces. As a result, areas critical with respect to high pollutant concentrations could be visualized. Particularly, the results show high concentration gradients on the surface of the buildings equipped with modelled emission sources. Inside the boundary layers on the building walls, a significant amount of pollutants is transported to upwind locations on the surface of the building. The paper documents the potential of physical modelling to be used for the simulation and measurement of dispersion close to emission sources and within complex building arrangements.     

风能资源开发利用的社会需要和发展前景

开发风能资源、利能风力发电在我国虽然只有数十年，但发展却很快。作为可再生的清洁能源越来越受到重视。不仅有巨大的环保意义，也有突出的经济效益。本文从风能利用的意义和社会需要展开论证，结合我国风能资源利用的概况，特别是结合风电装机最多的新疆的实际情况进行估算，从多侧面论述了风能资源的开发利用问题。     

风电机组与民爆危险品建筑物间安全防护距离的研究与选定

针对风电机组选址与民爆企业安全管理的突出矛盾,研究分析了风电机组和民爆危险品建筑物间安全距离设定的原则和方法,深入剖析了重大危险影响因素,并结合现行标准规范和国外相关规定及经验做法,估算了安全距离值,探讨了安全距离设定的可能性、合理性和适应性,提出了安全距离设定的建议和参照依据。     

ANALYSIS OF WIND- AND SHIP-INDUCED SEDIMENT RESUSPENSION IN DULUTH-SUPERIOR HARBOR1

ABSTRACT: Suspended solids and ammonium concentration profiles measured at five locations in Duluth-Superior Harbor during July-October 1985 were analyzed to quantify wind and ship effects on sediment resuspension and resulting harbor water quality. Wind components from the SE quadrant correlated strongly with depth-averaged suspended solids concentrations that were unaffected by ship passage or thermal stratification. Winds from that quadrant have the largest fetch in the harbor. The highest correlation (r²= 0.93) was with the 6-hour average of the ESE wind velocity component. Multiple linear regression analysis of data from post-ship passage concentration profiles yielded numerical estimates of settling velocities of 0.08 to 0.25 cm s^?1, typical of ship-resuspended sediments, and vertical eddy diffusivities of 4 to 13 cm² s¹. The results suggest that ambient vertical eddy diffusivities in the harbor are less than 4 cm² s^?1 in the absence of ship passages and with winds less than 5 m s^?1 (10 knots).     

“一一·二四”海难渤海风场的数值模拟

用中尺度数值模式 ＭＭ５对 １９９９年 １１月 ２４日烟台附近发生重大海难事故的渤海风场进行了数值模 拟，探讨了该次冷锋大风的风场特征和影响机制．结果表明：用９０ｋｍ的粗网格可以成功地模拟地面冷高压 与锋面的发展和移动，以及高空环流形势的演变．而通过３０ｋｍ细网格的模拟发现，在冷锋后的行星边界层 中．存在着一条宽度为 ２００ ｋｉｎ的中尺度强风带，最大风速位于 ９２５ｈＰａ，它与高空的极锋急流并不相连；细 网格还模拟出了渤海中尺度低压的发展过程，它使近地面层大风的强度显著加强．模拟还表明，海陆差异对 近地面的风场分布有重要的影响，强风带移入渤海后，在渤海海域形成一个 ２００—３００ ｋｍ的中尺度强风 区．因此，采用具有较高分辨率的中尺度数值模式，对提高渤海大风的预报水平，避兔海难事故的发生更具 有重要意义．     

涉及电动振动台选型的结构与技术的评价和分析

通过振动台系统组成部分（振动台体，磁场电源和功率放大器）涉及的结构与技术的分析，对振动台系统技术指标的先进性，结构设计的合理性及振动台用于振动试验的准确性和安全性的评价提供依据，可供选择振动台系统参考。     

中国东南沿海重点城市台风危险性分析

中国东南沿海地区是中国经济最发达，人口最稠密的地区，同时也是世界上受台风影响最严重的地区之一。本文以上海经9个沿海重点为例，通过对《台风年鉴》数据的分析处理，提取了台风关键参数并进行了统计分析与建模；利用Monte Carlo抽样和成熟台风风场模型模拟，得到了极值风速序列，对年极值风速序列进行极值风速统计分析，得到了不同重现期和地貌的极值风速，结果与实测风速比较吻合。