装修噪声污染及防治

对住宅装修噪声与振动的污染进行了调查监测分析,弄清住宅装修噪声源的特点,及其对周围声环境和居民的污染状况。提出住宅装修噪声的有关防治措施。     

Risk and characteristics analysis of the flow-induced vibration of the dip tube in opposed multi-burner gasifier

The vibration of dip tube in multi-burner gasifier changes the stress at the connection, causing flange seal failures and high temperature gas erosions with heavy economic losses and industrial accidents. This work aims to reveal the dip tube vibration mechanism, with special focus on obtaining the effect of operational parameters on the fatigue damage and long-term stable operation of gasifiers. A three-dimensional numerical simulation of the water-scrubbing cooling chamber was conducted to obtain the excitation source in the flow field. Then a FSI (fluid-structure interaction) transient dynamics simulation was carried out to investigate the vibration characteristics. Two major flow forms were found: a vertical annular flow near the dip tube outlet in the water-scrubbing cooling chamber; and a gas-liquid coupled flow caused by the syngas entrained the liquid. These two unstable multiphase flow forms exerted an energy excitation on the dip tube, resulting in a self-excited flutter. The dip tube vibration was similar to the first mode of a cantilever beam. The peak frequency was less affected by the initial liquid level and the syngas stream inlet velocity, which was close to its own first natural frequency. Note that, the alternating load generated by vibration may cause fatigue damage, which needs to be specifically considered in the design and manufacturing process of opposed multi-burner gasifier.     

排桩几何参数对其隔振半径的影响试验研究

通过室外试验的方法、从二维角度入手并将排桩参数与瑞利波波长建立联系研究了几何参数变化时隔振半径的变化。结果表明:单排桩可取得整体性的隔振特点,并且隔振效果最佳的区域在桩后较近的距离;桩长增加可使其隔振效果提升且隔振半径随桩长与波长比值的增加而增加,当桩长与波长比值小于0.320时,隔振半径为0;随比值增加到0.820左右,隔振半径增加到约0.680 m。桩间距的增加可使其隔振效果变差,隔振半径随桩间距与波长比值增加而降低,当比值达到0.300~0.430时,隔振半径长度降为0。振源距离增加可使得排桩隔振效果增强,而隔振半径随振源距与波长比值增加而增加,当比值在0.165~0.305的范围内时,隔振半径为0;随比值增加到0.808左右,隔振半径的长度增加到约0.512 m。     

小波熵去噪在微差爆破延时精确识别中的应用

在小波熵去噪理论的基础上,对实际隧道爆破工程采集到的爆破振动信号进行了小波熵方法去噪。利用db8小波对去噪后的信号在尺度a=16进行了连续小波变换得到其模极大值,准确识别了隧道多段别微差爆破实际延期时间间隔,并验证了小波熵方法去噪的可靠性。结果表明,小波熵去噪方法能够有效滤除和抑制爆破振动非线性信号所夹杂的高频噪声分量,并且很好地保留了爆破振动信号的突变细节。对滤波后的信号进行模极大值变换,信号局部奇异点的辨识更准确,可以精确识别隧道微差爆破延时间隔。     

基于互联网+的轨道交通动力设备安全管理系统的研究

根据我国轨道交通设备安全管理的需求,提出基于互联网+的轨道交通动力设备安全管理系统平台的框架,运用J2EE开发工具,采用嵌入式高速数据采集技术、故障诊断技术,构建形成集成化、网络化和信息化的轨道交通动力设备安全管理系统。完善智能的设备安全管理系统,能有效提高轨道交通动力设备的安全监管力度,保障设备安全。     

Endurance time,muscular activity and the hand/arm tremor for different exertion forces of holding

This study aimed to examine the effects of exertion force on endurance time, muscular activity and hand/arm tremor during holding. Fifteen healthy young males were recruited as participants. The independent variable was exertion force (20%, 40%, 60% and 80% maximum holding capacity). The dependent variables were endurance time, muscular activity and hand/arm tremor. The results showed that endurance time decreased with exertion force while muscular activity and hand/arm tremor increased with exertion force. Hand/arm tremor increased with holding time. Endurance time of 40%, 60% and 80% maximum holding capacity was approximately 22.7%, 12.0% and 5.6% of that of 20% maximum holding capacity, respectively. The rms (root mean square) acceleration of hand/arm tremor of the final phase of holding was 2.27-, 1.33-, 1.20- and 1.73-fold of that of the initial phase of holding for 20%, 40%, 60% and 80% maximum holding capacity, respectively.     

LRM 模块载荷分解方法研究

目的根据综合模块化航空电子设备的特点,研究LRM模块的载荷分解方法。方法通过仿真和试验方法,对LRM模块所承受的温度和振动载荷进行分解,并详细论述两种方法的具体实现过程。结果将模块载荷分解方法成功运用于某工程系统中,验证了方法的有效性。结论 LRM模块的载荷分解方法能够指导其他类似综合模块化航空电子设备的载荷分解,推动LRM模块合理的独立环境试验及交付。     

大尺寸结构振动试验系统浅析

研究总结了大尺寸结构振动试验系统现状与振动试验方法,解决随着振动试件尺寸的增大而出现的振动试验加载安装尺寸不足和单台振动台推力不足等问题。对国内外主要可靠性试验室针对大尺寸振动试验采取的方法和技术进行了研究和总结,分析与比较不同技术和方法对于解决问题的优劣,并介绍了采用不同方法进行大尺寸结构试件振动试验案例。总结并介绍了大尺寸结构产品振动试验系统,并对未来大尺寸结构产品振动试验系统的发展进行了展望。     

高桩码头的振动测量与分析

测量了高平潮、低平潮及两潮位之间三个时段某高桩码头工作平台的振动情况,比较了不同潮位下振动的最大位移值.对测量数据进行了分析,发现海浪对结构振动的位移大小影响明显,得到了工作平台的前三阶自振频率.利用两点差法,根据码头平动记录求取了码头沿垂直轴向的码头扭转分量,经计算码头转角在10-7rad量级,码头扭转的转动中心按照...     

减振降噪功能材料的研制

根据材料性能的要求,选择环氧树脂为粘合剂,低分子聚酰胺为固化剂,石粉,石英砂,玻璃纤维３种物质为填料,根据优化的配方制成一种高分子复合材料,该材料的硬度约为２４０ＨＢ左右,冲击强度约为３０ｋｇ·ｃｍ／ｃｍ＾２,均接近于某些金属材料的指标,易成型,并且成本较低,可以用来代替纺织厂有梭织机的某些受撞击比较严重的金属部件,具有广泛的应用价值。