交联阳离子淀粉的合成及其对重金属离子的吸附

通过正交实验合成了取代度为0．568的交联阳离子淀粉。考察了溶液pH、螯合剂用量、重金属离子初始浓度对交联阳离子淀粉去除重金属离子效果的影响。当重金属离子初始质量浓度为50mg／L、螯合剂投加量为0．5g／U时,Pb^2 ,Cu^2 ,Cr^3 在溶液pH为6时的去除率达到最高,分别为97．94％,99．46％,84．30％,而Cd^ 在溶液pH为7时的去除率达到最高,为99．36％。实验结果表明,交联阳离子淀粉是一种有效去除废水中重金属的处理剂。     

Survey of mercury,cadmium and lead content of household batteries

The objective of this work was to provide updated information on the development of the potential impact of heavy metal containing batteries on municipal waste and battery recycling processes following transposition of the new EU Batteries Directive 2006/66/EC. A representative sample of 146 different types of commercially available dry and button cells as well as lithium-ion accumulators for mobile phones were analysed for their mercury (Hg)-, cadmium (Cd)- and lead (Pb)-contents. The methods used for preparing the cells and analysing the heavy metals Hg, Cd, and Pb were either developed during a former study or newly developed. Several batteries contained higher mass fractions of mercury or cadmium than the EU limits. Only half of the batteries with mercury and/or lead fractions above the marking thresholds were labelled. Alkaline–manganese mono-cells and Li-ion accumulators, on average, contained the lowest heavy metal concentrations, while zinc–carbon batteries, on average, contained the highest levels.     

Reclaiming the spent alkaline zinc manganese dioxide batteries collected from the manufacturers to prepare valuable electrolytic zinc and LiNi0.5Mn1.5O4 materials

A process for reclaiming the materials in spent alkaline zinc manganese dioxide (Zn–Mn) batteries collected from the manufacturers to prepare valuable electrolytic zinc and LiNi_0.5Mn_1.5O₄ materials is presented. After dismantling battery cans, the iron cans, covers, electric rods, organic separator, label, sealing materials, and electrolyte are separated through the washing, magnetic separation, filtrating, and sieving operations. Then, the powder residues react with H₂SO₄ (2 mol L^?1) solution to dissolve zinc under a liquid/solid ratio of 3:1 at room temperature, and subsequently, the electrolytic Zn with purity of ?99.8% is recovered in an electrolytic cell with a cathode efficiency of ?85% under the conditions of 37–40 °C and 300 A m^?2. The most of MnO₂ and a small quantity of electrolytic MnO₂ are recovered from the filtration residue and the electrodeposit on the anode of electrolytic cell, respectively. The recovered manganese oxides are used to synthesize LiNi_0.5Mn_1.5O₄ material of lithium-ion battery. The as-synthesized LiNi_0.5Mn_1.5O₄ discharges 118.3 mAh g^?1 capacity and 4.7 V voltage plateau, which is comparable to the sample synthesized using commercial electrolytic MnO₂. This process can recover the substances in the spent Zn–Mn batteries and innocuously treat the wastewaters, indicating that it is environmentally acceptable and applicable.     

梯度洗脱离子色谱法同时测定降水中9种有机及无机阴离子

建立了梯度洗脱离子色谱法同时测定降水样品中的氟离子、乙酸、甲酸、甲基磺酸、氯离子、硝酸根、戊二酸、硫酸根、乙二酸等9种有机酸和无机酸阴离子的测定方法。利用ICS-1000型离子色谱仪配备的淋洗液发生器,产生梯度氢氧化钾溶液,结果显示在20min内很好地完成了9种离子的同时分离测定。该方法的回收率为78．9％～115％,测试的相对标准偏差均〈6．5％。此方法操作简便、准确、实用,是南方地区降水样品较理想的阴离子检测方法。     

赤泥和污泥对土壤锌化学形态转化的影响

通过土壤室内培养实验,研究了赤泥和污泥对土壤中Zn化学形态转化的影响。研究表明:单独使用赤泥可以有效降低土壤中植物可利用态Zn含量,促进可交换态(EXC)、碳酸盐结合态(CA)、有机结合态(OM)转化为残渣态(RES),而污泥对Zn的固稳效果是暂时的。赤泥和污泥的一起使用较单独使用赤泥或污泥固稳Zn的效果好,既能促进有效态重金属Zn转化为不可利用态Zn,又能增加土壤肥力。     

Chemically modified silica gel with 1-{4-[(2-hydroxy-benzylidene)amino]phenyl}ethanone: Synthesis, characterization and application as an efficient and reusable solid phase extractant for selective removal of Zn(II) from mycorrhizal treated fly-ash samples

1-{4-[(2-hydroxy-benzylidene)amino]phenyl}ethanone functionalized silica gel was synthesized and used as a highly efficient, selective and reusable solid phase extractant for separation and preconcentration of trace amount of Zn(II) from environmental matrices. The adsorbent was characterized by fourier transform infrared spectroscopy (FT-IR), elemental analysis,¹³C CPMAS NMR spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and BET surface area analysis. The dependence of zinc extraction on various analytical parameters such as pH, type and amount of eluent, sample flow rate and interfering ions were investigated in detail. The material exhibited superior adsorption efficiency for Zn(II) with high metal loading capacity of 1.0 mmol/g under optimum conditions. After adsorption, the recovery (> 98%) of metal ions was accomplished using 1.0 mol/L HNO₃ as an eluent. The sorbent was also regenerated by microwave treatment in milder acidic environment (0.1 mol/L HNO₃). The lower detection limit and preconcentration factor of the present method were found out to be 0.04 μg/L and 312.5 respectively. The modified silica surface possessed excellent selectivity for the target analytes and the adsorption/desorption process remained effective for at least ten consecutive cycles. The optimized procedure was successfully implemented for the extraction of Zn(II) from mycorrhizal treated fly ash and pharmaceutical samples with reproducible results.     

一种钢渣中氯离子的测定方法

利用蒸馏装置蒸出钢渣中的氯离子,使用硝酸汞滴定方法进行滴定,选用两种钢渣,在不同实验室分别进行了分析测定的比较和验证。结果表明:该方法简便易操作,重现性和准确性都比较高,作为钢渣中氯离子的测定是可行的。     

Flocculating characteristic of activated sludge flocs: Interaction between Al3+ and extracellular polymeric substances

Aluminum flocculant can enhance the flocculating performance of activated sludge.However,the binding mechanism of aluminum ion(Al 3+) and extracellular polymeric substances(EPS) in activated sludge is unclear due to the complexity of EPS.In this work,threedimensional excitation emission matrix fluorescence spectroscopy(3DEEM),fluorescence quenching titration and Fourier transform infrared spectroscopy(FT-IR) were used to explore the binding behavior and mechanism between Al 3+ and EPS.The results showed that two fluorescence peaks of tyrosineand tryptophan-like substances were identified in the loosely bound-extracellular polymeric substances(LB-EPS),and three peaks of tyrosine-,tryptophanand humic-like substances were identified in the tightly boundextracellular polymeric substances(TB-EPS).It was found that these fluorescence peaks could be quenched with Al 3+ at the dosage of 3.0 mg/L,which demonstrated that strong interactions took place between the EPS and Al 3+.The conditional stability constants for Al 3+ and EPS were determined by the Stern-Volmer equation.As to the binding mechanism,the-OH,N-H,C=O,C-N groups and the sulfurand phosphorus-containing groups showed complexation action,although the groups in the LB-EPS and TB-EPS showed different behavior.The TB-EPS have stronger binding ability to Al 3+ than the LB-EPS,and TB-EPS play an important role in the interaction with Al 3+.     

pH和Ni2+对人工纳米氧化硅吸附菲的影响

为了揭示菲在人工纳米氧化硅上的吸附行为,采用批量平衡实验对比研究了灼烧前后纳米氧化硅对菲的吸附,考察了pH值和重金属离子(Ni2+)对吸附行为的影响,并应用位点能量分布模型分析了菲吸附行为的变化.结果表明,吸附数据可用Freundlich模型较好地拟合,高温灼烧后纳米氧化硅对菲的吸附增加,lgKF由1.48增加到2.43;吸附的非线性也增加,结合孔分布及表面积变化,说明纳米氧化硅对菲的吸附为孔填充与表面吸附共同作用,内部孔对菲的吸附起主要作用.pH值的变化没有显著改变原始纳米氧化硅对菲的吸附;但是显著影响灼烧后纳米氧化硅对菲的吸附,吸附随着pH值的增加而降低,pH值由4.0增加到8.0,lgKF减少了73.7%.主要因为提高pH值,可明显增加灼烧纳米氧化硅的表面电荷,降低孔的可及性.不同浓度的Ni2+对菲吸附的影响不同,在Ni2+低浓度时(<5 mmol.L-1),表现为吸附抑制;在Ni2+高浓度时,对低浓度菲(50μg.L-1)表现为促进吸附,对高浓度菲(500μg.L-1)吸附的抑制程度不再增加.这是多个机制共同作用的结果.