Preliminary air pollution monitoring in San Miguel, Buenos Aires

Passive diffusion samplers were employed in San Miguel(Buenos Aires Metropolitan Area) for a preliminary airpollution monitoring. The highest loads were observedin downtown, compared with an urban background site.Total suspended particulate matter (TSPM) varied from0.257 to 0.033 mg cm^-2 month^-1; dust was examinedfor particle nature and size distribution. A similartrend was observed for nitrogen dioxide (NO₂) andTSPM spatial distribution, suggesting that traffic isthe major pollution source. Sulphur dioxide (SO₂)values were low and rather homogeneous. Levels for theinvestigated pollutants are below EPA's guide linevalues. Geographic (flat area, near to Rio de LaPlata) and climatologic factors (rainfalls andvariable wind directions) contribute to disperse pollutants.     

应用被动扩散管监测分析葫芦岛市环境空气NO2时空分布特征

被动扩散技术以其低成本、操作简单、空间覆盖率较高等优点已在西方国家广泛应用于环境空气质量监测与调查,辽宁省环保局通过欧盟项目引进,本技术在葫芦岛市环境空气质量监测应用有4年时间.依据4年环境空气被动扩散管监测基础数据,分析了解葫芦岛市城区大气中NO2时空分布特征:高浓度值出现在交通区,季节上呈现春季明显低于其它季节.     

应用被动扩散管监测分析葫芦岛市环境空气NO2时空分布特征

被动扩散技术以其低成本、操作简单、空间覆盖率较高等优点已在西方国家广泛应用于环境空气质量监测与调查，辽宁省环保局通过欧盟项目引进，本技术在葫芦岛市环境空气质量监测应用有4年时间。依据4年环境空气被动扩散管监测基础数据，分析了解葫芦岛市城区大气中NO2时空分布特征：高浓度值出现在交通区，季节上呈现春季明显低于其它季节。     

利用PUF被动采样技术监测珠江三角洲地区大气中多氯联苯分布

研究了珠江三角洲地区大气中多氯联苯的含量与分布.利用大气被动采样装置,共设立了包括香港在内的珠江三角洲21个大气被动采样点,样品采样时间为2005-08-15～2005-10-14.结果表明,珠三角内地的佛山(2000pg·m-3)是PCBs的高污染地区,内地采样点PCBs含量范围260～2000pg·m-3,平均值670pg·m-3.香港PCBs含量范围170～470pg·m-3,平均值300pg·m-3.香港每个采样点的PCBs含量都接近平均值,含量比较低.珠三角大气中PCBs含量与世界其它地区相比属中度污染区域.结果也表明,PUF大气被动采样器可很好地运用于区域大气PCBs污染分布与特征的对比研究.     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.     

Benzene Exposure Assessment at Indoor, Outdoor and Personal Levels. The French Contribution to the Life MACBETH Programme

Many VOC represent hazards to human health through chronic exposure. Recent European and world-wide legislation proposes limit values for ambient concentrations of these compounds. However, very little experimental data exists for true population exposure. In 1996, the European MACBETH initiative set out to measure population exposure to benzene in six European cities. This study details the French contribution to this program. Six campaigns were carried out, each comprising measurements at 100 outdoor sites and the participation of 50 non-smoking volunteers who wore personal samplers and had passive monitors installed in their homes. Iso-concentration maps were drawn for each campaign and the results showed that outdoor concentrations were significantly lower than indoors. Almost 75% of the volunteers were exposed to mean concentrations higher than the limit value of 5µgm³. It is demonstrated that personal exposure levels cannot be deduced simply by combining indoor and outdoor background concentrations. It is also shown that there is need for better knowledge of the contributions to overall exposure of outdoor microenvironments and the authors hope that future European directives will take this into account.     

受侧向土体位移斜桩的特性

通过三维有限单元法分析了斜桩受侧向土体位移的特性。变动柱和土体参数进行敏感性分析,得出桩的柔度、侧向土体位移的大小、桩顶约束条件、土体位移形状和土体移动层厚度等对斜桩的影响。刚性桩的挠度小于柔性桩,但弯矩和剪力大于柔性桩。斜桩非线性弹簧的土抗力—位移关系(p-y曲线)表现为双曲线特征,可基于直桩的Winkler地基反力法对斜桩进行简化计算分析,但应对直桩的极限土抗力值进行修正,以期更好的反映斜桩的特性。     

室内空气中的气态多环芳烃的被动采样监测

利用自制被动采样装置,在2011年秋冬季对南京市部分地区室内空气中5种气态多环芳烃(PAHs)(萘、苊烯、苊、芴、菲)进行了为期100d的连续采样检测,被动采样器的采样速率为0.012m3/d,5种PAHs的回收率在63%～105%之间,方法检出限在1.1～2.4ng范围内。结果表明,南京市5处不同室内环境空气中萘的浓度最高,占总量的90%以上。室内环境空气中5种PAHs的总浓度为230～1564ng/m3。住宅内人体对5种PAHs的暴露速率为479～560ng/h。     

被动加标在水生生态风险评价中的应用——以多氯联苯分配系数的测定为例

准确的水生生态风险评价需要可靠的毒性数据,而其获取要求在一定时间范围内,水体中污染物的浓度保持恒定。对疏水性有机污染物进行水体生物毒性测试时,通常采用有机溶剂加标,然而该方式可能因为污染物的挥发和降解、容器壁吸附、生物摄取等问题,水体中污染物浓度持续下降,导致污染物的浓度-效应关系难以明确。近期为了克服这些问题,被动加标用于替代溶剂加标,通过污染物在加标体系中平衡分配来维持精确和恒定的水体浓度,同时还可通过测定加标聚合物中污染物的浓度来监测水体浓度。首先介绍了被动加标方法及其材料选择,讨论了该方法在生态风险评价中的主要应用,包括分配系数的测定、体外细胞测试、体内生物积累及毒性测试,以及沉积物毒性评价等。然后,以测定代表污染物多氯联苯在聚二甲基硅氧烷与水间的分配系数为例,详细说明被动加标的操作流程。最后,讨论了被动加标方法的优缺点,并对其在水生生态风险中的应用前景进行了展望。     

巢湖沉积物有效磷的原位高分辨分析研究

将两种原位被动采样技术——高分辨平衡式间隙水(HR-Peeper)与氧化锆薄膜梯度扩散技术(Zr-oxide DGT)相结合,分别对巢湖西半湖7个点位溶解态反应性磷(cPW)和有效磷(cDGT)进行原位测定分析,cPW和cDGT在大部分沉积物剖面的分布相似或局部相似,说明不同深度沉积物固相有效磷组分对间隙水SRP的缓冲能力较接近.利用界面扩散通量和cDGT/cPW比值(R)表征沉积物磷的活性,从巢湖湖心向南淝河入湖口方向,界面以下6 mm的cPW、cDGT和扩散通量的变化基本一致,均呈递增趋势,表明沉积物磷的污染水平在增加;R值变化较小,说明沉积物界面处的缓冲能力差异不明显.