基于可接受安全间距的单车道交通流模拟模型

交通流微观模拟是采用计算机对交通流进行描述及分析的方法。尤其对于复杂的交通流而言,微观模拟具有明显的优势,然而模拟的准确与否,关键在于模型的建立。笔者即是在研究我国单车道交通流特点的基础上,借鉴车道变换理论,基于驾驶员可接受的交通安全间距,分析安全变换车道的各间距之间的关系,阐述了有超车的单车道交通流模拟模型的建立方法     

植物叶表大气降尘的采集和定量分析方法研究

随着工业化和城市化的快速发展,大气颗粒物污染形势严峻,对人体健康和生态环境都造成危害,其中危害植物的典型形式就是叶表降尘。虽然植被具有净化空气的滞尘能力,但是大气降尘也会在植物叶片表面长期积累进而通过影响光合作用、阻塞气孔等对植物的正常生长或作物产量造成不利影响。因此,作物叶表降尘的采集方法和降尘特征研究具有十分重要的现实环境意义,然而由于叶表降尘的"微量"特点,目前可行的能准确收集全部叶表降尘并进行定量的方法非常少,而且通常不能获得降尘样品供后续分析使用。该方法利用针筒与针头过滤器组合将降尘直接洗入针筒并通过微孔滤膜截留,再用叶面积仪确定单位叶面积降尘量,避免了降尘损失和称量误差,且能完整定量收集降尘样品供重金属污染物成分等物理化学分析,在环境科学和生态保护领域具有广泛的应用前景。     

基于各向异性粒子介电常数张量重构的散射特性研究

目的简化各向异性介质中的光电传播、目标散射识别等问题。方法基于电场强度矢量和电位移矢量的关系,提出将各向异性介质的介电常数张量重构为对角张量通用方法。结果给出了对角张量元素的表达式和对应单位特征矢量,并作了详细的数值计算。得到了单位特征矢量坐标系中电磁场与原坐标系中电磁场的变换关系以及磁导率张量的变换关系;所用方法具有通用性,所得结果具有实用性。结论在各向异性介质研究领域,可实现特征坐标系中的电磁场及介质参数与主坐标系的电磁场与介质参数的相互定量转换。     

Degradation of direct azo dye by Cucurbita pepo free and immobilized peroxidase

Enzymatic decolourization of the azo dye, Direct Yellow (DY106) by Cucurbita pepo (courgette) peroxidase (CP) is a complex process, which is greatly affected by pH, temperature, enzyme activity and the concentrations of H₂O₂ and dye. Courgette peroxidase was extracted and its performance was evaluated by using the free-CP (FCP) and immobilized-CP (ICP) forms in the decolourization of DY106. Immobilization of peroxidase in calcium alginate beads was performed according to a strategy aiming to minimize enzyme leakage and keep its activity at a maximum value by optimizing sodium alginate content, enzyme loading and calcium chloride concentration. The initial conditions at which the highest DY106 decolourization yield was obtained were found at pH 2, temperature 20℃, H₂O₂ dose 1 mmol/L (FCP) and 100 mmol/L (ICP). The highest decolourization rates were obtained for dye concentrations 50 mg/L (FCP) and 80 mg/L (ICP). Under optimal conditions, the FCP was able to decolorize more than 87% of the dye within 2 min. While with ICP, the decolourization yield was 75% within 15 min. The decolourization and removal of DY106 was proved by UV-Vis analysis. Fourier transform infrared (FT-IR) spectroscopy analysis was also performed on DY106 and enzymatic treatment precipitated byproduct.     

浅谈烟尘采样的两种分析验证方案

本文应用两种污染物传递数学模型分析烟尘采样过程,第一个模型假设烟尘经过采样后又经过一段物理运动重新达到平衡,因此得到采样后烟尘浓度和采样器内浓度的数学等式,第二种模型则是在第一种的模型基础之上给出烟尘浓度随,的变化而变化的数学表示式子.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

Interspecific competition effects on phosphorus accumulation by Hydrilla verticillata and Vallisneria natans

The competition between submersed plants has been recognized as an important factor influencing the structure of plant communities in shallow lakes. The ability of different species to take up and store nutrients from the surrounding ambience varies, and hence plant community structure might be expected to affect the cycling of nutrients in lake ecosystems. In this study, the uptake of phosphorus by Hydrilla verticillata and Vallisneria natans was studied and compared in monoculture and competitive mixed-culture plantings. Results showed that for both studied species the phosphorus concentrations of different tissues and of whole plants was unaffected by competition. However, the quantity of phosphorus accumulated by whole plants of H. verticillata was significantly higher in mixture culture than in monoculture, while that of V. natans was lower in the mixed culture. The results indicated that H. verticillata has a competitive advantage over V. natans, when the two species are grown in competition, and is able to accumulate a greater quantity of phosphorus.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface.