菌株Pseudomonas sp. JF122降解苯酚同时还原Cr(VI)的条件优化及生长特性研究

采用富集培养法,从钢铁厂附近河流污泥中分离筛选到1株能同时降解苯酚与还原Cr(VI)的菌株JF122.在600 mg·L^-1苯酚与1.2 mg·L^-1 Cr(VI) 的条件下,采用单因素实验考察了温度、初始pH、该菌接种量等因素对其同时降解苯酚与还原Cr(VI)的影响,并通过正交试验L₉(3³)获得适宜的苯酚降解与Cr(VI)还原条件.结果表明,菌株JF122降解苯酚与还原Cr(VI)的适宜条件为:30 ℃、初始pH=6和接种量1%,此条件下,菌株JF122在56 h内能够降解600 mg·L^-1苯酚同时还原1.2 mg·L^-1 Cr(VI).应用响应曲面法建立了菌株JF122的生长与温度、初始pH、接种量等因素间关系的数学模型,并对其生长条件进行了优化.结果表明,菌株JF122最优生长条件与其降解苯酚并同时还原Cr(VI)的最优条件具有一致性.     

如何解决大气环境影响预测存在的问题

目前大气环境影响预测存在所需基础数据不真实、预测方法未严格执行导则规范、人为忽略环境影响超标区域等问题。因此,需要通过优化技术复核、开发研究环境预测方法、开展对地方评估中心的技术复核培训和反馈来进一步提高大气环境影响评价的水平。《环境影响评价法》颁布十多年以来,环境影响评价制度在协调我国经济发展与环境保护方面发挥了巨大作用。由于环境影响预测的结论将直     

酸性矿山废水的治理技术现状及进展

酸性矿山废水(AMD)是矿山废水中危害最严重的一类废水,其产生原因和治理技术引起了广泛的重视。介绍了酸性矿山废水的主要产生原因,综述了国内外治理酸性矿山废水技术的研究现状,包括化学法、物理法、生物法、湿地法等,讨论了相关技术存在的问题,并总结了酸性矿山废水技术的新进展和发展趋势。     

活性炭吸附法处理冶金废水的工程设计模型

以博哈特(Bohart)和亚当斯(Adams)方程为推导依据,结合连续进水活性炭模型实验,证明了活性炭吸附法处理冶金废水的可行性,且得出了活性炭吸附高度、工作周期、污染物去除率等重要设计参数之间的关系,为活性炭的工程设计提出了一套有效的参考计算方法和设计程序。     

泥龄对A~2O工艺去除多环麝香的影响

研究了A2O工艺不同污泥龄(Sludge retention time,SRT)条件下中佳乐麝香(Galaxolide,HHCB)与吐纳麝香(Tonalide,AHTN)的去除和迁移的变化情况。采用固相萃取与气相质谱联用的方法对各池中水相与泥相中HHCB和AHTN的浓度进行分析。结果发现:A2O工艺对HHCB的去除效果好于AHTN。高SRT条件(15,20 d)下HHCB、AHTN的总去除率明显小于低SRT条件(5,10 d)下的总去除率。     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

基于阳离子树脂的Fenton非均相催化剂制备及性能测试

采用阳离子交换树脂颗粒为催化剂载体采用浸渍法负载二价铁离子,制备出非均相Fenton反应催化剂,并用该非均相Fenton催化剂氧化脱色亚甲基蓝溶液,考察其催化性能。实验结果表明:制备催化剂时最佳FeSO4浓度为16.67 mmol/L,pH=3.0,H2O2初始浓度为46.6 mmol/L,反应时间为30 min的条件下,亚甲基蓝溶液初始浓度为0.028 mmol/L时,亚甲基蓝溶液在非均相Fenton催化氧化过程中,其脱色率可达92.9%。采用序批形式反应使用5次后,该非均相催化剂仍有良好的催化效果,反应30 min后亚甲基蓝溶液脱色率仍可达85.2%,拓宽了Fenton技术的使用范围。     

全球气候谈判的理想与现实

2012年11月26日到12月7日,第十八次"联合国气候变化框架公约缔约方大会"在卡塔尔的多哈召开。今年的会址有些特别,卡塔尔是石油天然气的主产国,而气候谈判争论的焦点又是如何减少因化石燃料导致的二氧化碳排放;同时,多哈是WTO谈判的会场,而"多哈回合"历时11年迟滞受挫,致使贸易投资领域的多边框架受到质疑。如此,"多哈气候回合"     

γ-Fe_2O_3/膨胀石墨复合材料吸附废水中六价铬的应用研究

介绍了采用溶胶凝胶法合成新型的复合材料-磁性的γ-Fe_2O_3膨胀石墨(MEG)复合材料。通过采用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X-光电子能谱仪(XPS)对该复合材料MEG进行了表征,结果表明MEG中γ一Fe_2O_3的粒径约为50nm,而且其中γ一Fe_2O_3和膨胀石墨通过C=O相互作用。复合材料MEG作为新型的六价铬吸附剂,通过吸附时间、初始溶液的pH值以及再生性对该吸附过程进行了考察。结果表明:在40 min内MEG吸附六价铬的过程基本达到平衡;在初始溶液的pH为3.5时,MEG对六价铬的最大吸附量可以达到16.4mg/g;而且该复合材料MEG重复使用3次后吸附效果基本没有下降。因此,复合材料MEG对于废水中六价铬的处理有选择性吸附作用,而且初始溶液的pH值对其吸附过程起着重要作用。