等离子体协同光催化去除模拟烟气中SO2的实验研究

近年来,低温等离子体技术以及纳米TiO₂光催化技术在烟气脱硫中的应用越来越引起人们的关注。利用填充床反应器将这2种技术有机地结合起来，进行了大量脱硫实验研究。研究结果表明，等离子体协同光催化去除烟气中的SO₂与单独采用等离子体技术相比，其SO₂的去除率可提高5%～20%。同时，探讨了等离子体协同TiO₂光催化剂的脱硫机理，分别研究了外加电压、气体流量和SO₂初始浓度等因素对脱硫效率的影响。实验结果表明，当SO₂初始浓度为800 mg/m³，输入电压为17.5 kV，气体流量为0.2 m³/h时，SO₂脱除率可以达到77.6%。     

低温等离子体治理H2S污染的实验研究

低温等离子体技术是一种高效、快速的污染消除技术，国内外都在对其进行广泛而深入的研究。采用脉冲电晕放电等离子体对空气中的硫化氢进行降解研究，探索了、脉冲峰压、脉冲频率、气体流量以及气体初始浓度对净化效果的影响，气体浓度由气相色谱仪测定。结果表明，脉冲电晕放电可以有效消除硫化氢污染，净化率随脉冲峰压和脉冲频率的增加而提高，随气体初始浓度和流量的增加而下降，且在初始浓度360mg／m^2、流量1200mL／min、脉冲峰压30kV、脉冲频率80Hz的条件下，处理后的气体中已检测不到H2S，根据色谱检测限（0．29mg／m^3）计算出的净化率≥99．92％。采用离子色谱对产物进行了定性分析，发现H2S经放电处理后主要产物为SO2和SO3。     

介质特性对DBD降解苯的影响

为了提高介质阻挡放电(dielectric barrier discharge,DBD)等离子体的处理效率,研究了内外介质组成分别为:(1)石英 石英;(2)陶瓷 石英;(3)陶瓷 陶瓷这3种情况下苯的降解情况.试验结果表明,在处理低浓度含苯废气时,陶瓷 陶瓷效果最好;陶瓷(内管) 石英(外管)在处理高浓度含苯废气时显示出优势.通过对气相产物和固相结焦产物的分析验证了DBD能有效降解苯,降解产物不会带来新的污染.进一步分析了实验条件和介质材料的变化对DBD降解苯的影响机理.     

IEC 61000-4-2中ESD间接放电实验一致性研究

国际电工委员会标准IEC 61000-4-2：2001修改了对位于受试设备下方的水平耦合板施加放电的试验方法。按照新的试验方法对3种不同厂商生产的静电放电模拟器在水平耦合板上产生的电场和磁场的一致性进行了研究比较。实验结果表明,距离放电点较近时,不同模拟器之间产生的场的差异很大,而距离放电点较远时,不同模拟器之间的差异变小,可以通过增大放电间距来改善不同模拟器之间的一致性;提高放电电压,可使不同模拟器之间的差异进一步减少。     

低温等离子体催化治理气态污染物的研究进展

低温等离子体催化技术作为一种环保新技术具有能耗低、使用便利、不产生副产物等优点,介绍了低温等离子体催化技术的基本原理和在处理VOCs、氮氧化物和机动车尾气治理等领域的研究进展.并提出了该技术应用于治理废气领域尚需解决的问题和发展方向.     

介质阻挡放电脱除H2S影响因素研究

恶臭污染物的危害已引起世界各国的广泛关注.选取恶臭污染物的典型代表硫化氢(H2S)气体,采用介质阻挡放电低温等离子体反应器在常温常压下对H2S气体进行去除,考察了在高频放电条件下,H2S去除率与放电电压、频率、浓度、停留时阃、湿度、和放电间隙、占空比的关系.实验结果表明,较高的放电电压、较长的停留时间、较大的放电间隙有利于提高H2S去除,合适的湿度、放电频率、脉冲调制有利于提高反应器的效率.反应器参数与电源的有效匹配对于提高H2S去除率及节能降耗十分重要.     

Characterizing spatial distribution and sources of heavy metals in the soils from mining-smelting activities in Shuikoushan, Hunan Province, China

The spatial variation of heavy metals in the soils in Shuikoushan mining-smelting area, Hunan Province, China, was investigated using multivariate and geo-statistic analysis. A total of 106 composite soil samples were collected in an area of about 100 km2. Concentrations of total As, Cd, Pb, Zn, Cu and Cr were measured using inductively coupled plasma mass spectrometry (ICP-MS). Arsenic and Pb were found to have a common source, indicating the same sources and spreading processes, such as aerosols and airborne particulates from smelting chimneys. Airborne sources from smelting chimneys contributed greatly to Cd in the area, which demonstrated the same dispersion pattern as As and Pb. However, two hot spots of Cd around smelters were possibly enlarged by wastewaters, demonstrating another important source of Cd in Shuikouhsan. Geo-statistic interpolated mapping demonstrated that hotspots of Zn were only found proximal to the large smelters, suggesting that Zn primarily came from the chimneys of larger smelters. The major Cu hot-spots appeared closely to the tailing dam, indicating that weathering and leaching of tailings were the major sources of Cu contamination in Shuikoushan. Our findings indicated that airborne volatile particles and aerosols contributed the most to As, Cd, Pb, Zn and Cu contamination, while Cd and Cu may also derive from the discharge of wastewater from smelters and the leaching of tailings, respectively.     

Evaluation of phosphorus removal from wastewater by soils in rural areas in China

Low-cost, easy-maintenance and high-e ciency decentralized wastewater treatment technologies are urgently needed in rural areas of China. Processes with high potential for phosphorus removal are of great interest. However, commonly used treatment methods often do not meet the strict criteria for removing phosphorus from rural wastewater. In order to search an economic and simple technology for phosphorus removal from the common bio-technologies e uent, seven soil types collected from di erent rural areas in China were investigated for their ability to remove phosphorus. X-ray di raction (XRD) was used to analyse the mineral structure, and inductively coupled plasma optical emission spectrometer (ICP-OES) was used to analyse the geochemical composition of the soil samples. Three primary minerals – quartz, albite and montmorillonite – were clearly detected. The samples were divided into two soil types, acidic soils and alkaline soils, based on their pH values. The geochemical composition study indicated that a higher percentage of Ca and Mg occurred in alkaline soils (pH > 8) than in acidic soils (pH < 6.5). Adsorption isotherms from batch experiments fitted the Langmuir and Freundlich models well, the maximum P adsorption capacities ranged from 0.256 to 1.598 mg P/g, indicating a high phosphorus removal potential for all of these soils. The P fractions extracted revealed that the sum of NaOH-extracted inorganic P (NaOH-Pi) was the major P component in the acidic soils, and CaCO3-bound phosphorus (Ca-P) in the alkaline soils. Dynamic adsorption simulation showed that these soils have the ability to remove phosphorus from wastewater.     

短信息

德国开发出"可印刷的"电池德国研究人员最近开发出了世界上首款"可印刷的"电池,它薄如纸张,用丝网印刷技术就能生产。据德新社报道,德国弗劳恩霍弗电子纳米系统研究所研发的这种"薄纸"电池每个质量不足1克,厚度不到1毫     

海水中痕量元素测定及其在重金属污染源判别方面的应用

利用电感耦合等离子体质谱(ICP-MS)研究了胶州湾及莱州湾这两个海域中痕量元素污染水平,发展了ICP-MS海水环境中痕量元素的测定方法,同时找出海水环境中具有保守性的数种元素作为污染示踪元素.达到对于海水环境中痕量污染物被动示踪的目的.对18个真实样品进行了识别率试验,识别率可达90%以上,在选取3个海水样品及1个河水样品混合后的模拟分担率实验,也取得了满意的结果,其误差平均值仅有1.17%.