废弃玻璃钢的资源化利用研究

废弃玻璃钢回收处理技术一直是国内外的研究热点之一,其中物理回收法是比较有应用前景的一种处理方法。本文研究了废弃玻璃钢物理回收处理工艺,设计了回收处理生产线,并针对现有切割设备难以满足废弃玻璃钢制品切割要求的问题,研发、制造了新型的高效切割设备。     

混凝过滤用于城镇污水厂深度处理的实验研究

国家强制要求城镇污水厂将尾水的排放标准由一级B提高至一级A,且通过政策以及经济手段鼓励企业开展再生水的回用。混凝过滤工艺用于深度处理可以有效去除SS和总磷,使用聚合氯化铝、硫酸铝和氯化铁作为混凝剂对比实验。使用PAC作为混凝剂,深度处理后出水总磷可以达到0.1 mg/L,SS基本可以稳定在8mg/L以下。     

印染废水处理与回用的工艺设计与应用探讨

本文主要是结合某一印染企业废水处理工艺,通过应用"混凝反应+水解酸化+MBR(膜生物反应器)"处理工艺,并采用"RO膜(反渗透)+臭氧催化氧化"对出水进行再生,然后按照相应的生产用水需求,对其进行分流、分质回用,发现其效果良好,在印染废水处理中值得推广应用。     

乙醇处理对树脂基纳米水合氧化铁结构及其除砷性能的影响

通过考察乙醇处理对树脂基纳米水合氧化铁(D201-HFO)结构及其除砷性能的影响,评价乙醇处理在复合材料制备中的必要性.结果表明,乙醇处理后负载水合氧化铁(HFO)在D201树脂内的分散性增加,材料对砷的饱和吸附量提高约20%,且复合材料的比表面积、孔容、孔径分别增加了52%、65%、28%;但乙醇处理对复合材料的机械强度和负载HFO的晶型无影响,在pH值、离子竞争对该材料除砷性能的影响趋势方面也无明显作用,对复合材料固定床除砷性能及再生方面也无明显作用.总体而言,乙醇处理对D201-HFO复合材料实际除砷性能影响不大,从技术经济性考虑可以省略.     

新型ISTD反应器处理污水处理厂污泥的试验研究

针对传统的污泥处理方法存在消化时间长、投资及运行费用高、运行管理较复杂等问题,开发了污泥同时浓缩与消化——新型ISTD反应器,并对城市污水厂剩余污泥进行试验研究。试验结果表明:在30³5℃,COD有机负荷0.65 kg/(m3·d),水力停留时间5 d的条件下,有机物分解率为53.88%,排泥含水率为91.91%,出水SS平均为612 mg/L。     

含铬废水的处理技术及机理简述

介绍了废水中六价铬的来源及存在形态,以及处理含铬废水的物理、物化、化学及生物等各种工艺,并对各种工艺的机理和优缺点进行分析,展望含铬废水的治理前景。     

Ethyl thiosemicarbazide intercalated organophilic calcined hydrotalcite as a potential sorbent for the removal of uranium(VI) and thorium(IV) ions from aqueous solutions

This work was conducted to determine the practicability of using a new adsorbent 4-ethyl thiosemicarbazide intercalated,organophilic calcined hydrotalcite(ETSC-OHTC) for the removal of uranium(U(VI)),and thorium(Th(IV)) from water and wastewater.The FTIR analysis helped in realizing the involvement of nitrogen and sulphur atoms of ETSC in binding the metal ions through complex formation.Parameters like adsorbent dosage,solution pH,initial metal ions concentration,contact time and ionic strength,that influence adsorption phenomenon,were studied.The optimum pH for maximum adsorption of U(VI) and Th(IV) was found to be in the range 4.0-6.0.The contact time required for reaching equilibrium was 4 hr.The pseudo second-order kinetic model was the best fit to represent the kinetic data.Analysis of the equilibrium adsorption data using Langmuir,Freundlich and Sips models showed that the Freundlich model was well suited to describe the metal ions adsorption.The K F values were 25.43 and 29.11mg/g for U(VI) and Th(IV),respectively,at 30°C.The adsorbent can be regenerated effectively from U(VI) and Th(IV) loaded ones using 0.01mol/L HCl.The new adsorbent was quite stable for many cycles,without much reduction in its adsorption capacity towards the metals.     

国内外污泥处理处置技术现状与发展趋势

随着污泥产生量的日益增加,其对生态环境造成的负面影响逐渐引起了世界的关注,同时人类社会也在共同探寻一个经济合理、安全可靠的污泥处置方案。系统分析了国内外污泥处理处置技术现状、主流技术研究及应用进展,并结合我国国情对污泥处理处置发展趋势进行了展望。     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

基于生命周期评价的城市固体废弃物处理模式研究进展

通过回顾2003-2010年国内外不同城市固体废弃物管理体系生命周期评价结果,列举比较了不同固体废弃物处理模式下的全球变暖潜力、酸化潜力和净能源效用等影响评价因子的大小,得出城市固体废弃物处理模式环境影响等级:填埋的环境影响潜值最大,焚烧的环境影响潜值小于填埋,而结合堆肥后环境影响潜值降低;此外,将固体废弃物资源化引入到处理模式后,特别是垃圾源头分类回收后,环境影响潜值大大降低。结合我国城市固体废弃物处理现状,提出单一的处理模式应转变为综合处理模式,多种生活垃圾处理方式适当的有机结合,因地制宜地开展固体废弃物资源化管理,以及餐厨垃圾源头分类收集处理等建议,为政府能有效利用城市固体废弃物处理设施的能力提供参考。