La-Co-Fe-Cu/HZSM-5在尾气碳颗粒燃烧中的催化性能

采用柠檬酸络合低温浸渍法制备分子筛负载钙钛矿型复合氧化物催化剂。采用XRD、SEM和H2-TPR等手段对催化剂性能进行表征,并在微型固定床反应器中对催化剂进行活性评价。结果表明,在钙钛矿型复合氧化物中进行B位离子掺杂,可以改善催化活性,碳颗粒燃烧温度降低。在20%LaCoO3/HZSM-5催化剂中用铁离子部分取代钴离子可以改善碳颗粒的燃烧性能,取代量增加碳颗粒燃烧温度降低,但是生成CO2的选择性也降低,以20%LaCo0.2Fe0.8O3/HZSM-5为催化剂,Tig、Tm和Tf分别为256℃、399℃和403℃,但生成CO2的选择性只有72.5%。在20%LaCo1-xFexO3/HZSM-5中的钙钛矿型复合氧化物B位离子中加入铜离子后,在碳颗粒燃烧反应中生成CO2的选择性得到明显改善,Sco2提高10个单位以上。以20%LaCo0.2Fe0.6Cu0.2O3/HZSM-5为催化剂,在碳颗粒燃烧反应中生成CO2的选择性可以达到94.7%,Tig、Tm和Tf分别为242℃、427℃和445℃。     

脉动频率对低浓度瓦斯脉动燃烧的影响研究

本文将低浓度瓦斯与脉动燃烧结合,主要研究了脉动频率对低浓度瓦斯燃烧的影响。实验结果发现：频率为99Hz至120Hz之间的脉动燃烧不仅可以降低贫燃极限．实现瓦斯在5％浓度下稳定而充分的燃烧,而且在相同温度下提高了瓦斯燃烧效率,污染物的排放也得到了改善。     

新型有机废液焚烧炉炉内燃烧过程的数值模拟

为了实现化工有机废液的减量无害化处理,提出了一种新型废液焚烧炉。以某20 t/h废液焚烧炉为研究对象,利用fluent软件对新型有机废液焚烧炉炉内燃烧过程进行了数值模拟,分析了炉内温度场分布、速度场、水分浓度场分布。结果表明:炉内一二层燃烧器分级布置的四角切圆燃烧方式能很好的组织废液的干燥及燃烧,焚烧炉设计合理。研究结果可为改进废液焚烧炉的设计提供参考。     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Pd/activated carbon sorbents for mid-temperature capture of mercury from coal-derived fuel gas

Higher concentrations of Hg can be emitted from coal pyrolysis or gasification than from coal combustion, especially elemental Hg. Highly efficient Hg removal technology from coal-derived fuel gas is thus of great importance. Based on the very excellent Hg removal ability of Pd and the high adsorption abilities of activated carbon（AC） for H2 S and Hg, a series of Pd/AC sorbents was prepared by using pore volume impregnation, and their performance in capturing Hg and H2 S from coal-derived fuel gas was investigated using a laboratory-scale fixed-bed reactor. The effects of loading amount, reaction temperature and reaction atmosphere on Hg removal from coal-derived fuel gas were studied. The sorbents were characterized by N2 adsorption, X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）. The results indicated that the efficiency of Hg removal increased with the increasing of Pd loading amount, but the effective utilization rate of the active component Pd decreased significantly at the same time. High temperature had a negative influence on the Hg removal. The efficiency of Hg removal in the N2-H2S-H2-CO-Hg atmosphere（simulated coal gas） was higher than that in N2-H2S-Hg and N2-Hg atmospheres, which showed that H2 and CO, with their reducing capacity, could benefit promote the removal of Hg. The XPS results suggested that there were two different ways of capturing Hg over sorbents in N2-H2S-Hg and N2-Hg atmospheres.     

南京秋冬季典型霾污染过程及边界层特征分析

针对近年来南京地区秋冬季的几次典型秋冬季霾污染过程,利用地面空气污染监测资料、探空资料、常规气象观测资料,对霾污染过程的特征,特别是边界层特征进行综合分析。结果表明,秋收季节秸秆燃烧对于南京及周边地区的空气质量有明显影响,局地空气污染指数飙高。南京及周边地区几次霾污染过程,均出现逆温层,贴地逆温、脱地逆温均影响霾的形成。5次霾污染过程中,均有观测时次混合层高度小于200 m,并且低混合层高度持续时间与API高值时间一致。总体上,混合层高度与API(AQI)呈相反趋势。     

SCR催化剂对汞的催化氧化研究进展

文章综述了目前国内外选择性催化还原(SCR)催化剂催化氧化燃煤烟气中汞的研究现状。介绍了钒基、铜基、铁基、锰基、铈基以及贵金属SCR催化剂对汞的催化氧化性能;分别分析了烟气温度、烟气组分(Cl2、HCl、SO2、NH3等)、空速等因素对各催化剂汞氧化性能的影响;最后运用文献对比方法综合概括了燃煤烟气条件对汞氧化的影响,并结合我国燃煤电厂现状,对SCR催化脱汞技术的发展方向提出建议:利用SCR催化剂实现燃煤烟气中汞的氧化,结合现有污染物控制设备实现汞的脱除,是一种经济、高效的燃煤烟气脱汞技术;当前应深入研究SCR催化剂对汞的催化氧化机理,开发能够实现NOx与汞协同控制的,稳定、高效、普适性强的低温SCR催化剂。     

电力行业碳捕集现状和发展趋势

全面介绍了燃煤电厂3种CO2捕集技术,包括燃烧前捕集,燃烧后捕集以及富氧燃烧捕集技术。通过对各种CO2捕集技术的对比,提出各种捕集方法的适用范围和优、缺点。在此基础上调查了我国碳捕集技术的研究以及碳捕集示范工程项目的进展,分析了我国电力行业碳捕集技术现状和面临的问题并对电力行业碳捕集发展趋势进行了探讨。     

火电厂低氮燃烧改造技术的应用

本文介绍了氮氧化物产生的机理以及低氮燃烧技术在火电厂大型燃煤锅炉的应用,简述其技术特点和改造措施,并通过试验测试了改造后的效果。     

复合燃料温室气体排放量计算方法探讨

当前复合燃料温室气体(GHG)排放量的计算普遍采用IPCC排放因子法,此法的运用需要依赖准确的燃料消耗计量、燃料氧化率和燃料低位热值等数据,其缺省因子是否适合有待商榷。本文通过采用实地监测手段,在获得了企业固定排放源设备的相关参数后,采用IPCC排放因子法、质量平衡法、时间比法、负荷法和热值分配法等几种方法对企业GHG排放量进行了计算。结果显示:IPCC排放因子法的计算结果并不能准确地反映企业温室气体的排放情况,而热值分配法可以较好地对燃烧复合燃料的固定燃烧源GHG排放量进行计算。建议有条件的地区采用监测法对固定燃烧源GHG排放量进行计算,而采用热值分配法对燃烧复合燃料的固定燃烧源拓展时间段的GHG排放量进行计算。