以废弃耐火材料制备再生料研究的新进展

综述了废弃耐火材料再生利用的情况,主要介绍了国内对废弃镁铬砖、废弃镁碳砖、废弃铝镁碳砖、废弃镁钙砖、废弃滑板砖、废弃鱼雷罐砖等的再生利用研究成果与再生耐火材料的性能.结果表明,再生耐火材料的性能可以达到新产品水平.对废弃耐火材料的再生利用,可以有效地降低生产成本,同时也能减少对环境的污染,既带来了经济效益,也带来了社会效益.在此基础上,展望了废弃耐火材料今后的发展趋势.     

Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

聚硅酸对不同形态铝沉积行为的影响

针对给水管网中残余铝沉积和再溶解现象可能引起的水质问题,研究了聚硅酸对不同水解聚合形态铝沉积、再溶解的影响,并以石英微晶天平为表征手段,初步探讨了聚硅酸对不同形态铝沉积、再溶解过程影响的机理.结果表明,聚硅酸能显著改变不同水解聚合形态铝的沉积、再溶解行为.聚硅酸可与3种水解聚合形态的铝迅速结合而生成可沉积产物,但产物性质不同.以单体形态为主的Al_0与聚硅酸的反应产物性质较稳定,部分以溶解态存在,部分以非溶解态(可沉积态)存在;尽管铝的两种聚合形态Al_(13)和Al_(30)与聚硅酸反应也生成了部分可沉积产物,但随着时间的推移,这些产物又逐渐向溶解态转化.铝硅比对Al_0体系中铝的沉积溶解行为影响较小,而对Al_(13)和Al_(30)影响较大,且在0.2∶20(以Al和SiO_2计的质量比)时,沉积态铝的溶解速率最快.     

镁法脱硫副产物亚硫酸镁处理现状

简单论述了镁法烟气脱硫技术在国内外的应用现状,镁法烟气脱硫技术具有脱硫效果好、投资小、运行维护费低、副产品可回收等优点;同时介绍了镁法脱硫技术在我国的应用优势,重点是镁法脱硫副产物综合利用的几种方法,如亚硫酸镁煅烧回收氧化镁,该技术是镁法脱硫副产物循环利用的关键。     

A-LBG凝胶珠对碱性品红的吸附特性研究

以刺槐豆胶(LDG)、海藻酸钠(A)为材料制备复合凝胶珠,探讨反应时间、碱性品红浓度、温度及pH对复合凝胶珠吸附碱性品红的影响。结果表明,复合凝胶珠对碱性品红的吸附在180 min后达到平衡,pH=8为最佳吸附pH,同等条件下,复合凝胶珠对碱性品红的吸附优于活性炭,其对碱性品红的吸附行为符合Freundlich吸附等温方程和颗粒内扩散方程。     

镁法脱硫技术在荣程钢铁公司的应用

本文介绍了天津荣程联合钢铁集团有限公司265m2烧结机镁法脱硫的工艺流程,并就镁法脱硫的特点指出了其优势以及发展前景。     

多孔介质中黄原胶改性微米铁的迁移和滞留

为改善微米零价铁(mZVI)在地下水中的迁移性能,该文采用黄原胶(XG)制备稳定化微米铁(XG-mZVI),通过渗流实验研究XG-mZVI的穿透曲线及其在砂柱中的分布规律,探讨XG浓度、孔隙水流速、石英砂粒径和非均质性对XG-mZVI在饱和砂柱中迁移行为和沉积特征的影响。结果表明,XG浓度≥3 g/L时能够明显强化mZVI的迁移能力。XG-mZVI在砂柱中的迁移性能随石英砂粒径和流速的增大而增强。保持其他参数不变,穿透粗粒砂柱(1.0～1.7 mm)的XG-mZVI比穿透细粒砂柱(0.25～0.38 mm)的量多26.4%;在最高流速(0.99×10^-3m/s)下穿透砂柱的XG-mZVI比在最低流速下(0.38×10^-4m/s)的值高14.2个百分点。XG-mZVI滞留量由砂柱进水端向出水端递减,表明其被截留的主要机制是滤除作用。一维渗流条件下,渗透性变异层对XG-mZVI的沉积/释放机制影响不明显。     

用褐铁矿制备聚硅氯化硫酸铁的研究

通过正交实验研究了用盐酸、硫酸、褐铁矿和硅酸钠制备聚硅氯化硫酸铁（PSFCS）絮凝剂的工艺条件。实验结果表明,浸取时间为2.5～3 h,浸取温度为110℃,硫酸浓度为6 mol/L,盐酸浓度为3 mol/L,质量液固比为4∶1,铁的浸出率可达95.7%～96.3%。溶液中加入少量聚乙烯醇作稳定剂,亚硝酸钠作氧化催化剂。PSFCS的合成条件：Fe/Si摩尔比为2,硅酸活化pH值为2,硅酸活化时间是30～40 min,陈化时间是2～2.5 h。与聚合硫酸铁（PFS）和聚合氯化铝（PAC）比较了处理印染废水的效果,表明PSFCS具有良好的絮凝性能,COD和浊度的去除率分别可达81.4%和96.1%。     

磷酸铵镁碱促(Mg(OH)_2)热解产物氨氮去除性能

磷酸铵镁热解循环技术可以有效降低磷酸铵镁结晶技术的药剂费用。同时,在磷酸铵镁热解过程中添加Mg(OH)2碱促媒介,能阻止磷酸氢镁向焦磷酸镁的转化,并降低热解产物氨氮去除过程中上清液磷酸盐的残留。在Mg(OH)2∶NH+4摩尔比为1∶1,热解温度为110℃条件下,热解产物沉氨效率接近84%,上清液磷酸盐残留量为0.02 mg/L。