夏、冬季降雨中溶解性有机质(DOM)光谱特征及来源辨析

利用紫外-可见光谱与三维荧光光谱,结合拉格朗日混合单粒子轨道模型及火点图,研究了重庆2013年夏、冬两季雨水DOM光谱特征,并对其来源进行解析.结果表明,雨水DOM与水体、土壤DOM具有类似性质光谱特征,证明降雨DOM也是陆地及水环境中DOM地化特征的重要贡献者.雨水DOM中DOC含量为0.88~12.80 mg·L-1,CDOM含量在3.17~21.11m-1之间,夏、冬两季降雨DOM差异明显(P0.05).与夏季相比,冬季降雨DOM分子量较小,芳香性程度较低,腐殖化程度也更低,输入主要以本地和短距离输送为主;而夏季DOM来源较分散.尽管吸收和荧光光谱可用于解析雨水DOM组成和来源,但在光谱特征的解析和来源识别上与其他来源DOM有所区别,传统"内、外源区分"并不适用于雨水DOM.     

Degradation of direct azo dye by Cucurbita pepo free and immobilized peroxidase

Enzymatic decolourization of the azo dye, Direct Yellow (DY106) by Cucurbita pepo (courgette) peroxidase (CP) is a complex process, which is greatly affected by pH, temperature, enzyme activity and the concentrations of H₂O₂ and dye. Courgette peroxidase was extracted and its performance was evaluated by using the free-CP (FCP) and immobilized-CP (ICP) forms in the decolourization of DY106. Immobilization of peroxidase in calcium alginate beads was performed according to a strategy aiming to minimize enzyme leakage and keep its activity at a maximum value by optimizing sodium alginate content, enzyme loading and calcium chloride concentration. The initial conditions at which the highest DY106 decolourization yield was obtained were found at pH 2, temperature 20℃, H₂O₂ dose 1 mmol/L (FCP) and 100 mmol/L (ICP). The highest decolourization rates were obtained for dye concentrations 50 mg/L (FCP) and 80 mg/L (ICP). Under optimal conditions, the FCP was able to decolorize more than 87% of the dye within 2 min. While with ICP, the decolourization yield was 75% within 15 min. The decolourization and removal of DY106 was proved by UV-Vis analysis. Fourier transform infrared (FT-IR) spectroscopy analysis was also performed on DY106 and enzymatic treatment precipitated byproduct.     

苏州河表层沉积物中总汞测定的研究

采用金汞齐富集-冷原子吸收光谱法直接测定苏州河表层沉积物中的总汞。结果表明:该方法在0.00～200ng范围内呈良好线性关系,检出限为0.005mg/kg(样品以0.2g计)。实际样品测定的RSD为1.24%～4.36%,加标回收率为91.8%～101%。与原子荧光光谱法相比,两种方法测定的结果没有显著差异。     

固相萃取-红外分光光度法测定水中的总油

建立了固相萃取(SPE)-红外分光光度测定水中总油的方法,并对固相萃取条件进行了优化,实验表明,对于1L添加2mg标准油的水样,其总油的回收率为86%-93%,多次重复实验测定的相对标准偏差为2.9%(n=6)。     

红外系统对点源目标作用距离的优化计算

作用距离是红外系统核心性能指标之一,受大气、背景等多方面因素的影响。针对传统作用距离计算方法存在的局限,综合考虑多个影响因素,提出了一种优化计算方法,首次精确计算了作用距离与实际距离之差的大气衰减值,并对计算方法进行了验证。结果表明,优化计算方法具有较好的计算精度,可用于红外系统性能预测和整体设计。     

ε-聚赖氨酸生产废菌体对六价铬吸附影响的研究

以ε-聚赖氨酸(ε-PL)发酵生产废菌体小白链霉菌(Streptomyces albulus)PD-1为研究对象,探讨了其对吸附Cr(Ⅵ)的影响.实验过程中,对预处理方式、pH、初始Cr(Ⅵ)浓度、吸附时间和温度等因素进行了考察.结果表明,HCl预处理的菌体具有较好的吸附能力,Cr(Ⅵ)的吸附增加率达到22.7%,最佳pH为2.0左右,温度对Cr(Ⅵ)的吸附影响不大.实验过程中分别采取Langmuir和Freundlich 2种吸附等温模型对实验数据进行了拟合,得到2个模型的线性相关系数R2分别为0.979 4和0.979 8,这表明吸附过程中既存在单层吸附同时也存在复杂的多层吸附,小白链霉菌对Cr(Ⅵ)的最大理论吸附量为23.92mg.g-1.通过傅里叶变换红外光谱分析,酰胺基和羟基等基团在吸附过程中起主要作用.     

连续流动分光光度法测水体中的氨氮

采用连续流动分析仪,用连续流动分光光度法,对水体中的氨氮进行实验研究。优化了试验方法,使氨氮的标准曲线线性相关性高,操作简便,大大提高了检测的效率,缩短了样品测量时间。样品中的测量值均在国家标准之内,测量的精度高。     

ASTAR IR-200红外三波数测油仪自校方法

针对ASTAR IR-200红外三波数测油仪,提出仪器的自校方法。     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.