有机化改性海泡石对六六六吸附性能的探讨

分别采用阴阳离子表面活性剂对海泡石进行有机化改性处理,并对改性海泡石进行了吸附六六六实验.结果表明,未经有机化改性的海泡石对六六六各异构体去除能力由小到大依次为:γ-六六六(12.66%)、δ-六六六(12.79%)、α六六六(17.35%)、β-六六六(33.57%).经DOSO3Na有机化改性的海泡石对六六六各异构体的去除能力由小到大依次为:β-六六六、γ δ-六六六、α-六六六.经CTMAB有机化改性的海泡石对六六六各异构体的去除能力由小到大依次为:β-六六六、α-六六六、γ δ-六六六.有机化改性海泡石使体系中β-六六六大幅度增加,可能为有机化海泡石催化α、γ、δ各异构体向β异构体转化.     

微生物对土壤与沉积物吸附多环芳烃的影响

以枯草芽孢杆菌为接种微生物,研究微生物对沉积物和湿地土壤吸附多环芳烃（PAHs）菲、苯并［a］芘过程的影响.结果表明,枯草芽孢杆菌对菲与苯并［a］芘都可进行吸附或生物降解,48h液相PAHs浓度达到平衡时,微生物对菲消除了98％,对苯并［a］芘消除85％;接种的样品48h吸附等温线均呈线形,能较好地符合线性方程;在接种微生物情况下,沉积物与土壤对菲和苯并［a］芘吸附特征均发生较大变化,对菲的吸附量增大约35倍,而对苯并［a］芘的吸附量却降低了2/3左右;未接种微生物的土壤和沉积物对菲解吸率为20％,接种的样品组为2.9％,而对苯并［a］芘的解吸结果与菲相反,未接种的对照组为4％,接种的样品组为13％.微生物在土壤与沉积物吸附PAHs的过程中起主导作用.     

ZnOOH/O3催化臭氧化体系去除水中痕量对氯硝基苯

以实验室制备的羟基化锌（ZnOOH）为催化剂,考察了其催化臭氧化去除水中痕量对氯硝基苯（ppCNB能力.本实验条件下,蒸馏水中反应20　min时,催化臭氧化比单独臭氧化对pCNB的去除率提高了51 .3个百分点;催化过程遵循自由基反应机理,催化剂表面结合的羟基基团有利于催化反应;pCNB的去除效果随催化剂投量的增加而更佳,催化剂重复使用3次后,催化效果基本没有变化,水中的重碳酸盐以及缓冲溶液中的磷酸盐可以明显降低催化活性,中性条件下,催化作用最佳.     

土壤中多环芳烃的SPMD辅助解吸行为研究

为了开发一种表征土壤中憎水性有机污染物解吸及生物有效性的新方法,建立了半透膜被动采样装置（SPMD）研究土壤中有机污染物解吸行为的方法,利用SPMD分析了多环芳烃菲、芘和苯并［a］芘在3种不同性质土壤中的辅助解吸行为.结果表明,SPMD是一种很好地表征土壤中憎水性有机污染物解吸及生物有效性的手段. SPMD辅助解吸多环芳烃的效率与土壤有机质及多环芳烃性质有关.随着土壤有机质含量的降低,土壤中菲和芘的SPMD解吸率逐渐升高,对于10 mg/kg染毒水平,当土壤有机质含量由18.68%降低到0.3%时,2种化合物的解吸率分别由56.45%和48.28%上升到接近100%;但是对于苯并［a］芘,粘土表现出明显的滞留能力,在有机质含量（0.3%）很低、粘土含量（39.05%）较高的3号土壤中,苯并［a］芘的解吸率仅有66.97%.不同多环芳烃SPMD辅助解吸率差别很大,随着土壤有机质含量的降低,以及污染物浓度的提高,菲和芘的解吸差异逐渐缩小,而苯并［a］芘与上述2种多环芳烃的差异很大,主要是由于苯并［a］芘具有高度亲脂性,并且分子较大,造成其容易滞留在粘土的微孔及有机质的致密结构中.     

你可别学他(双簧)

甲乙:今天我们哥儿俩为大家表演一段双簧. 乙:我先给这位兄弟化化妆.(边化边说) 人不打扮不好看,这要打扮好了您再看.(露出甲的脸) 甲:双簧是一种传统艺术,一个人在前面演,一个人在后面说.后面怎么说,前面就要怎么演.     

荧光桃红-溴化十六烷基三甲基铵检测有机磷农药残留总量

在pH为6.40的B-R缓冲溶液中,荧光桃红与一定浓度的溴化十六烷基三甲基胺发生荧光增强反应,加入有机磷农药后,体系的荧光强度降低,且降低程度与有机磷农药的加入量呈良好的线性关系,建立了用此荧光法来测定有机磷农药残留总量的新方法.在优化试验条件下,线性范围为0.008-0.72 mg·L-1,检出限为0.05 mg·L...     

1957-2007年新疆天山山区气候变化对径流的影响

利用天山山区1957-2007年的气温、降水量及径流数据,借助非参数检验、小波变换等方法分析了天山山区气温、降水量及年径流量的变化趋势及多时间尺度相关。结果表明:玛纳斯河与塔里木河源流区年径流量、气温与降水量均呈显著增加趋势;在年代际上,塔里木河源流区气温存在11、18和22 a的主周期,降水量存在10、20与22 a的主周期;玛纳斯河气温在10与22 a处存在明显周期,降水量在20与22 a处周期性明显;同时,两源流区气温和降水量皆存在3~6 a的年际周期变化;塔里木河年径流量、气温和降水量的突变点分别发生在1993、1993和1992年,而玛纳斯河分别在1995、1988与1996年发生显著性突变;两流域源流区年径流量与气候因子存在显著的多时间尺度相关关系。     

提高生产过程安全联锁系统可靠性的实用技术

以聚醚车间雾化器的安全联锁和工业蒸汽锅炉汽包的安全联锁两个实例,介绍了在安全性要求比较高的中、小型生产装置中,以较少的投资提高安全联锁系统可靠性的实用方法.这种基于冗余技术思想的实用安全技术,适用于石油化工生产过程及其它一些生产领域.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.