负载V2O5-WO3/TiO2掺炭纤维脱除烟气中Hg0

通过固定床实验系统研究烟气脱除零价汞的实验,首先研究了滤袋常用的聚苯硫醚（polyphenylene sulfide,PPS）以及活性炭纤维（activated carbon fiber,ACF）在不同温度、不同气体组分下负载V₂O₅-WO₃/TiO₂催化剂,对模拟燃煤烟气中零价汞（Hg⁰）的脱除效果。然后对比研究了活性炭纤维协同滤袋常用纤维负载催化剂后,对模拟燃煤烟气中Hg⁰的脱除性能。结果表明,在汞蒸气入口浓度为50 μg/m³,纯N₂气氛下,当温度为25℃时,两者脱除率均能达到99%,当温度为200℃,负载催化剂的活性炭纤维脱除率在30%左右,PPS纤维仅为10%左右。在200℃情况下,模拟烟气的组分为N₂+O₂时,2种纤维的Hg⁰脱除率提高了10%~20%,当在混合气体中添加0.01‰后,负载催化剂的PPS纤维Hg⁰脱除率能达到80%,活性炭纤维Hg⁰脱除率能达到98%。当温度为200℃,模拟烟气的组分为N₂+O₂+HCl时,不同性能掺炭纤维负载催化剂后Hg⁰脱除率在69%~95%范围之间变化,其中PPS掺炭纤维对Hg⁰脱除效率最高达到95%,因此,负载V₂O₅-WO₃/TiO₂催化剂的PPS掺炭纤维能在高温烟气中保持较高的Hg⁰脱除率。     

飞灰-氢氧化钙/聚苯硫醚(PPS)滤料对烟气中单质汞的脱除

在汞固定床实验台上进行了飞灰-氢氧化钙和PPS滤料负载飞灰-氢氧化钙吸附单质汞,以及不同温度、气体成分对滤料负载吸附剂脱除汞影响的实验研究。实验结果表明,质量配比为2∶1的飞灰-Ca(OH)2吸附剂对Hg0的脱除效果最好,最高可达到34.5%左右,比纯飞灰条件下的脱除效率提高了近10%。120℃条件下,PPS滤料负载飞灰-Ca(OH)2吸附剂对汞的脱除率最高达72%,远高于滤纸薄膜上吸附剂的脱除率。随着温度升高,PPS滤料负载吸附剂的脱除效率降低。HCl、SO2和NO对PPS负载吸附剂脱除汞表现出不同程度的促进作用,HCl具有很强的促进作用,少量HCl足以大幅度提高脱除效果,SO2有一定的促进作用,NO的促进效果并不明显。     

负载V2O5-WO3／TiO2掺炭纤维脱除烟气中Hg^0

通过固定床实验系统研究烟气脱除零价汞的实验,首先研究了滤袋常用的聚苯硫醚（polyphenylene sulfide,PPS）以及活性炭纤维（activated carbon fiber,ACF）在不同温度、不同气体组分下负载V2O5-WO3／TiO2催化剂,对模拟燃煤烟气中零价汞（Hg^0）的脱除效果。然后对比研究了活性炭纤维协同滤袋常用纤维负载催化剂后,对模拟燃煤烟气中Hg^0的脱除性能。结果表明,在汞蒸气人口浓度为50μg／m^3,纯N2气氛下,当温度为25℃时,两者脱除率均能达到99％,当温度为200℃,负载催化剂的活性炭纤维脱除率在30％左右,PPS纤维仅为10％左右。在200℃情况下,模拟烟气的组分为N2＋O2时,2种纤维的Hg^0脱除率提高了10％～20％,当在混合气体中添加0．01％。后,负载催化剂的PPS纤维Hg^0脱除率能达到80％,活性炭纤维Hg^0脱除率能达到98％。当温度为200℃,模拟烟气的组分为N2＋O2＋HCl时,不同性能掺炭纤维负载催化剂后Hg^0脱除率在69％～95％范围之间变化,其中PPS掺炭纤维对Hg^0脱除效率最高达到95％,因此,负载V2O5-WO3／TiO2催化剂的PPS掺炭纤维能在高温烟气中保持较高的Hg^0脱除率。     

Impacts of charcoal characteristics on sorption of polycyclic aromatic hydrocarbons

Sorption of three polycyclic aromatic hydrocarbons (PAHs, phenanthrene, anthracene and pyrene) on three charcoals and their precursor substance (sawdust) was studied. The charcoals obtained by heating at 400 0;C for different periods were different in chemical composition and structure. Sorption characteristics were described by a Polanyi013;Dubinin013;Manes model combined with poly-parameter linear free energy relationships. The results revealed that though partition could not be neglected for sawdust and charcoal containing large sawdust residue, adsorption controlled the sorption of PAHs on matured charcoals, where <0;013;<0; electron donor013;acceptor (EDA) exerted as the main molecular-scale interactions. Charring elevated partition coefficients (K_oc) of the three PAHs more than one order of magnitude, which ranged from 10^5.74 to 10^6.58 on charcoals (for PAHs at equilibrium concentration C_e = 0.005S_w). Adsorption increased with the aromaticity of the charcoals, however, polar aromatic structure may stimulate sorption of PAHs due to the presence of <0;013;<0; EDA interactions.     

汶川8.0级地震都江堰市天然气系统震害分析及救灾过程

四川都江堰市地处龙门山主山前边界大断裂上,在汶川8.0级地震烈度分布图中属于Ⅸ度区,是地震受灾最严重的城市之一。作为城市生命线的天然气供应链在本次地震中遭遇了一定的破坏。通过对都江堰市天然气系统的基本构成、震害情况以及应急救灾过程等的调查与整理,对都江堰燃气系统中门站、CNG加气站、中压配气管网及低压配气支管各组成部分在地震中的震害情况进行了分析,对震后的应急处置措施、供气恢复策略及灾后重建工作进行了综述,总结了汶川地震中都江堰天然气系统的应灾经验及救灾环节中的不足之处,并就如何提高燃气系统的抗震应灾能力提出建议。     

汶川8.0级地震非承重墙体震害调查分析

通过对汶川8.0级地震发生后西安、成都地区(地震烈度为Ⅵ～Ⅶ度区)的高层建筑震害调查,以某小区震后建筑物非承重墙体裂缝为实例,给出了高层建筑震害易发生的部位和楼层,分析了非承重墙体裂缝产生的原因。震害调查表明:汶川地震中,在抗震设防烈度为Ⅵ～Ⅷ度区,当地震烈度为Ⅵ～Ⅶ度时,非承重墙抗震性能的表现不尽如人意。提出了应对非承重墙体制定设防目标,且非承重结构构件的抗震设防目标应与主体结构设防目标相适应,使建筑结构设计,对非承重墙的抗震设防有据可依,使灾后有可能对设计与施工的质量进行评估,通过有区别地加强非承重墙的抗震构造措施,减小建筑物的震害损失。     

无标准石墨炉原子吸收的绝对分析

介绍和讨论了石墨炉原子吸收特征质量m0的概念,并对一些元素m0的理论计算值与测定值作了比较。结果表明,鉴于恒温平台石墨炉(STPE)技术的应用,有可能发展为无标准原子吸收的绝对分析。     

The prevalence of bacterial resistance in clinical, food, water and some environmental samples in Southwest Nigeria

The resistance pattern and mechanisms of bacterial isolates obtained from clinical origin, soil, industrial effluent, orange juice products and drinking water were studied using commonly used antibiotics. The microbial load of the water samples, industrial effluent and orange juice products were 1.0 × 10¹013;2.25 × 10⁶, 2.15 × 10⁵, and 3.5 × 10⁴013;2.15 × 10⁵ cfu mL^013;1, respectively. The faecal coliform test revealed that only two out of twenty orange juice products had MPN of 2 and 20, the MPN of water ranged from 1013;01696m91q111g6/xxlarge8805.gif" alt="ge" align="MIDDLE" BORDER="0">1800, while the effluent had MPN of 01696m91q111g6/xxlarge8805.gif" alt="ge" align="MIDDLE" BORDER="0">1800. The bacterial isolates that were isolated include E. coli, S. aureus, P. vulgaris, S. marcescens, S. pyogenes, B. cereus, B. subtilis, Micrococcus sp., Klebsiella sp., P. aeruginosa, and Enterobacter sp. Also, clinical and soil isolates of P. aeruginosa were used in the study. Among the eight antibiotics tested for resistance on five strains of each bacterium, seven different resistance patterns were observed among the bacterial isolates obtained from water, effluent and orange juice products. Among the clinical and soil isolates of P. aeruginosa, four multiple-drug resistance patterns were obtained. Thirty strains of E. coli and S. aureus were tested for 01696m91q111g6/xxlarge946.gif" alt="beta" align="MIDDLE" BORDER="0">-lactamase production and fourteen strains, seven each of E. coli and S. aureus that had high Minimum Inhibitory Concentration values (MIC) for both Amoxycillin and Cloxacillin were positive.     

Distribution of poly(β-hydroxybutyrate) and poly(ε-caprolactone)aerobic degrading microorganisms in different environments

To assess the capacity of the natural environment for degrading plastics, the populations of poly(0mn6522p2826/xxlarge946.gif" alt="beta" align="MIDDLE" BORDER="0">-hydroxybutyrate)(PHB)-and poly(0mn6522p2826/xxlarge949.gif" alt="epsi" align="BASELINE" BORDER="0">-caprolactone)(PCL)-degrading aerobic microorganisms and their ratios to the total number of microorganisms in soil samples were estimated by the plate count method with agar medium containing emulsified PHB or PCL. The numbers of the degrading microorganisms were determined by counting colonies that formed clear zones on the plate. It was found that PHB- and PCL-degrading (depolymerizing) microorganisms are distributed over many kinds of material, including landfill leachate, compost, sewage sludge, forest soil, farm soil, paddy soil, weed field soil, roadside sand, and pond sediment. Of total colony counts, the percentages of PHB and PCL degrading microorganisms were 0.2013;11.4 and 0.8013;11.0%, respectively. The results suggest that many kinds of degrading microorganisms are present in each environment and that specific consortia differing in biodegradation capacity are constructed.     

Physical properties and biodegradability of blends containing poly(ε-caprolactone) and tropical starches

In order to assess feasibility of tropical starches (sago and cassava starches) as biodegradable plastic materials, blending with poly(0">-caprolactone) (PCL), a biodegradable polymer, was carried out. It was confirmed that the physical properties (tensile strength and elongation) of PCL/sago and PCL/cassava blends were similar to those of PCL/corn blend, suggesting that sago and cassava starches can also be blended with PCL for production of biodegradable plastic. However, the properties of all PCL/starch blends were still low compared with those of polyethylene. Enzymatic degradability evaluation showed that lipase degradation of PCL and0">-amylase degradation of starch increased as the starch content in the blend increased. Burial test of the blends for 1, 3, and 5 months was carried out and the rate of degradation of the PCL/sago blend was confirmed to be slower than those of PCL/corn and PCL/cassava blends. Observation of the film blends structure by scanning electron microscope revealed that the starch was dispersed in a PCL continuous phase. Furthermore, changes in the film surface before and after enyzme treatments were observed.