青藏高原北缘P波波形线性度的动态跟踪及其变化的物理机制初探

利用数字化近震Ｐ波波形资料，追踪研究了青藏高原北缘１９９０年２月～１９９５年８月Ｐ波波形时间线性度的变化过程。发现该区较大地震发生前线性度有一定程度的下降现象。分析认为：大震前孕震区应力场的不均匀分布可使通过孕震区及其周缘的地震波产生频散，可能是较大地震前波形时间线性度下降的物理本质     

北京地区15000年以来环境变迁中灾害性气候突变事件的讨论

通过高分辨率孢粉分析及烧失量、炭屑实验结果的统计分析，结合１４Ｃ、古地磁等，对北京房山东甘池１５０００ａ以来植被变化和环境变迁进行了较为深入的研究，特别强调气候变化的灾害性突变事件。初步得知约在１４１００～１４０００ａＢ．Ｐ．前后曾出现与哥得堡反转相对应的事件，在１００００ａＢ．Ｐ．左右出现类似与新仙女木事件相对应的事件，在大约５７７０ａＢ．Ｐ．和４５６０ａＢ．Ｐ．左右及２８５０～２６５０ａＢ．Ｐ．出现了大暖期的突然降温事件。     

模拟气候升温对湿地土壤微生物群落及磷素形态的影响

通过构建微宇宙湿地柱模拟气候升温的方法,采用高通量测序和核磁共振技术,分别研究了湿地土壤微生物群落和磷素形态对暖化作用的响应特征.结果表明,暖化作用导致了Firmicutes、Clostridia、Clostridiales、Clostridiaceae和Clostridium的相对丰度分别显著下降65%~98%、69%~87%、67%~87%、73%~97%和74%~93%,这表明暖化作用对不同分类水平上的物种Firmicutes到Clostridium具有显著的抑制效应.通过主坐标分析和聚类分析,不同湿地柱采样点的暖化组与对照组样本表现出显著的分离特征,揭示了暖化作用能够诱导微生物群落组成发生显著性变化.磷酸单酯和正磷酸盐是各湿地柱土壤主导的磷素形态,同时暖化作用导致了XX湿地柱采样点的磷酸单酯和正磷酸盐相对丰度分别显著升高275%和下降20%,JH湿地柱采样点的磷酸单酯和多聚磷酸盐相对丰度分别显著升高85%和下降49%,这表明不同磷素形态对暖化作用的响应具有土壤异质性特征.通过典型对应分析,揭示了暖化条件下微生物群落组成的显著变化对磷素形态具有显著的影响效应.     

九龙江口滨海湿地生源要素空间分布特征

为了揭示亚热带典型滨海湿地生源要素的空间分布特征及影响因素,选取九龙江口滨海湿地为研究对象,于2009年夏采集表层沉积物及柱状样,利用元素分析仪和流动注射分析仪对主要生源要素碳、氮、磷、硫(C、N、P、S)进行分析.结果表明,九龙江口滨海湿地生源要素含量较高,总碳、总氮、总磷、总硫(TC、TN、TP、TS)的均值分别为(12.64±2.66)、(1.57±0.29)、(0.48±0.06)、(2.61±1.37)g·kg-1,空间分布差异性显著.红树林植被区表层沉积物的TC、TN、TP含量高于米草植被及光滩,高潮位TC、TN、TP含量>中潮位>低潮位,TS在米草植被及中潮位含量较高.柱状样的TC、TN具有相似的垂直变化趋势,均表现为由表层向下逐渐降低,且不同植被间的柱状样TC、TN含量在同一深度上都表现为:红树区>米草区>光滩区;柱状样TP平均值是光滩最低,TS平均值是光滩最高.冗余分析表明,植被类型、pH及潮位是影响表层沉积物生源要素(C、N、P、S)分布最显著的环境因子,解释量分别为24.0%、19.0%和11.6%.     

基于液相31P核磁共振(NMR)技术的巢湖沉积物中有机磷形态研究

利用改进的沉积物有机磷提取方法和液相31P核磁共振(NMR)分析方法,研究了巢湖表层沉积物有机磷形态.结果表明:西部湖区表层沉积物总磷含量高于东部湖区,其平均含量分别为(1089.82±108.14) mg·kg-1和(497.80±51.59) mg·kg-1;东部湖区沉积物中有机磷百分含量(31.88％±2.41％)高于西部湖区(20.86％±1.65％);表层沉积物主要磷份组成包括膦酸盐(Phon-P)、正磷酸盐(Ortho-P)、磷酸单酯(Mono-P)、磷脂(Lipid-P)、DNA(DNA-P)、焦磷酸盐(Pyro-P);磷酸单酯为有机磷的主要组分,平均含量占总磷的22.12％±5.32％;磷酸单酯和DNA百分含量东部湖区大于西部湖区,磷酸单酯百分含量分别为25.99％±2.29％和16.30％±1.06％,DNA百分含量分别为5.61％±0.24％和3.85％±1.01％.31P核磁共振技术可以有效的应用于巢湖等富营养化湖泊沉积物磷形态分析;巢湖表层沉积物以无机磷为主,有机磷种类丰富,以磷酸单酯为主.     

Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

Speciation of organic phosphorus in a sediment profile of Lake Taihu II. Molecular species and their depth attenuation

The understanding of organic phosphorus(P) dynamics in sediments requires information on their species at the molecular level,but such information in sediment profiles is scarce.A sediment profile was selected from a large eutrophic lake,Lake Taihu(China),and organic P species in the sediments were detected using solution phosphorus-31 nuclear magnetic resonance spectroscopy(31 P NMR) following extraction of the sediments with a mixture of 0.25 mol/L NaOH and 50 mmol/L EDTA(NaOH-EDTA) solution.The results showed that P in the NaOH-EDTA extracts was mainly composed of orthophosphate,orthophosphate monoesters,phospholipids,DNA,and pyrophosphate.Concentrations of the major organic P compound groups and pyrophosphate showed a decreasing trend with the increase of depth.Their half-life times varied from 3 to 27 years,following the order of orthophosphate monoesters > phospholipids DNA > pyrophosphate.Principal component analysis revealed that the detected organic P species had binding phases similar to those of humic acid-associated organic P(NaOH-NRP HA),a labile organic P pool that tends to transform to recalcitrant organic P pools as the early diagenetic processes proceed.This demonstrated that the depth attenuation of the organic P species could be partly attributed to their increasing immobilization by the sediment solids,while their degradation rates should be significantly lower than what were suggested in previous studies.     

化学铁盐辅助除磷对生物除磷的影响研究

化学辅助除磷有助于污水厂实现磷达标,但其对生物系统存在潜在的影响。针对除磷药剂对生物除磷过程的影响展开研究,选用硫酸亚铁进行化学辅助除磷。药剂形成的化学污泥干扰生物除磷过程且成分复杂,故以磷酸铁、氢氧化铁模拟化学污泥,由钾离子、K/P摩尔比计算出同步除磷中的生物除磷,来探讨化学污泥对聚磷菌释磷/吸磷过程的影响。结果表明,连续投加硫酸亚铁使聚磷菌的释磷量、吸磷量降低;系统中磷酸铁含量0.075 mmol/L时聚磷菌的释磷和吸磷能力提高了约25%,磷酸铁含量0.15 mmol/L时对聚磷菌吸磷有抑制作用;氢氧化铁对聚磷菌释磷、好氧初期吸磷均有抑制作用。生物污泥与化学污泥存在交互作用。     

水中脲类除草剂Chlortoluron氯化产物鉴定、降解途径探究

对不同pH下Chlortoluron氯化后生成的非挥发性中间产物和挥发性产物进行了研究。对Chlortoluron氯化后的非挥发性中间产物的UPLC-ESI-MS鉴定发现了m/z为213、229、263、281、和247的离子,分析表明它们分别是Chlortoluron及其一羟基、一氯羟基、二氯和一氯衍生物。对Chlortoluron氯化后的挥发性产物采用吹扫补集-GC-MS进行分析鉴定发现了三氯甲烷(CF)、二氯硝基甲烷(DCNM)、二氯乙腈(DCAN)、1,1-2-二氯丙酮(1,1-DCP)、三氯硝基甲烷(TCNM)和1,1,1-2-三氯丙酮(1,1,1-TCP)六种消毒副产物。根据本研究中的实验结果分析和推测,在Chlortoluron的氯化过程中,苯环上和脲基链上都经历了羟基化、氧化和取代反应,接着苯环被打破,随后生成了更为有害的副产物,基于此,本文推断了Chlortoluron的氯化降解途径。     

Investigation on the changes effected by tool profile on mechanical and tribological properties of friction stir processed AZ31B magnesium alloy

The present study investigates the effect of tool shoulder profile on the mechanical and tribological properties of friction stir processed AZ31B magnesium alloy. The tool rotational speed and feed rate are the chosen process parameters. The experiments were conducted with 3 level 2 factors full factorial design. The recorded responses were tensile strength, wear losses and corrosion rate. The results were analyzed with the help microstructures of the processed samples. The study reveals that, for concave shoulder tool, the strain hardening effect was playing a major role in determining the properties of the processed materials and for the step shoulder tool, the grain size plays a major role in determining the properties of the processed materials.