Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

Dynamic contact angle effects on gas-liquid behaviors in the cathode of proton exchange membrane fuel cell with stirred tank reactor design

Liquid water management is still a critical issue in the improvement of proton exchange membrane fuel cell (PEMFC) performance. In this work, for the first time, the liquid water behavior and transport inside the cathode of a PEMFC with a stirred tank reactor (STR) design, rather than the conventional PEMFC flow channel design, are numerically studied. The dynamic contact angle (DCA) is applied to multiple wall boundaries in the numerical model through a user-defined-function (UDF) code, i.e., STR-DCA model. Another numerical model with the static contact angle (SCA) and same operating conditions, i.e., STR-SCA model, is also developed for comparison. The volume of fluid (VOF) method is employed in the simulation to track the gas-liquid interface. The results show that the liquid water distribution and transport are significantly different between these two models, indicating the remarkable effects of DCA on the simulation results. It is also verified the capability of STR-PEMFC to reduce the liquid water flooding, showing the potential of this channel-less type fuel cell in the further development.     

中国工业园区生态化发展决策优化方法研究

工业是当前中国经济绿色转型升级的关键行业,而工业园区作为工业集聚化发展的主要载体,工业园区生态化发展是解决资源环境问题、实现经济可持续发展的有效途径。本文关注工业园区生态化发展的中长期发展战略和具体方案,致力于通过仿真模拟的方法提出工业园区生态化发展的方向和优化路径,实现研究方法的创新。研究以3E系统(经济—环境—能源)为基础,综合分析工业园区经济发展与能源环境之间的耦合关系,并结合动态投入产出模型和系统动力学模型构建生态化发展决策模型,通过最优化动态模拟方法开展趋势预测和路径研究。通过辛集工业园区的实证和案例研究,对其生态化发展路径进行深入研究,验证了研究方法的科学性和可靠性,能够为工业园区生态化发展提供实践指导。本文为工业园区生态化发展规划提供新的研究方法,为制定合理有效的工业园区综合战略和实施路径提供科学依据。     

Impact of floodplain and Stage 0 stream restoration on flood attenuation and floodplain exchange during small frequent storms

River flooding impacts human life and infrastructure, yet provides habitat and ecosystem services. Traditional flood control (e.g., levees, dams) reduces habitat and ecosystem services, and exacerbates flooding elsewhere. Floodplain restoration (i.e., bankfull floodplain reconnection and Stage 0) can also provide flood management, but has not been sufficiently evaluated for small frequent storms. We used 1D unsteady Hydrologic Engineering Center's River Analysis System to simulate small storms in a 5 km-long, second-order generic stream from the Chesapeake Bay watershed, and varied % channel restored (starting at the upstream end), restoration location, restoration bank height (distinguishes bankfull from Stage 0 restoration), and floodplain width/Manning's n. Stream restoration decreased (attenuated) peak flow up to 37% and increased floodplain exchange by up to 46%. Floodplain width and % channel restored had the largest impact on flood attenuation. The incremental effects of new restoration projects on flood attenuation were greatest when little prior restoration had occurred. By contrast, incremental effects on floodplain exchange were greatest in the presence of substantial prior restoration, setting up a tradeoff. A similar tradeoff was revealed between attenuation and exchange for project location, but not bank height or floodplain width. In particular, attenuation and exchange were always greater for Stage 0 than for bankfull floodplain restoration. Stage 0 thus may counteract human impacts such as urbanization.     

自然通风排热量的近似计算法

采用“假设密闭绝热空间法”,计算工业厂房的自然通风排热量。实践证明,此方法是可行的。     

烟气脱硫系统的吸收塔及停留时间

介绍了烟气脱硫系统中三种主要的吸收塔类型,及烟气在吸收塔中停留时间和喷淋吸收区高度的计算方法。简述了液气比与气速、烟气中SO2含量的关系,并列举了喷淋塔、动力波塔和平流塔等工程实例。     

响应面法优化阴阳极同时作用电化学法处理染料废水

在自制电化学反应器中,以甲基橙模拟染料废水为处理对象,采用Box-Behnken Design响应面法研究了影响阴阳极同时作用电化学法处理染料废水的因素及其交互作用。实验得出各因素对废水脱色率影响的大小顺序为：电流密度> Fe³⁺浓度>Cl^-浓度。各因素之间的交互作用对废水脱色率影响的大小顺序为：电流密度和Fe³⁺浓度>电流密度和Cl^-浓度>Fe³⁺浓度和Cl^-浓度。优化结果表明：Fe³⁺浓度为1.02 mmol/L、Cl^-浓度为10.96 mmol/L、电流密度为11.52 mA/cm²时,最佳脱色率为94.67%。阴阳极同时作用电化学法对甲基橙去除效果显著。     

对地铁工程风险评估体系框架的研究

地铁工程同一般建设项目相比,受不可预见的水文地质条件、社会环境、施工技术的可靠度、经济发展的程度等多方面因素的影响较重;就必然使地铁工程成为高风险的工程建设项目,然而目前对其风险评估工作还停留在简单的定性和定量的评估水平上。为此,笔者在研究系统论的基础上,从动态系统风险评估的观点出发,运用动态控制的原理,着重研究适合于地铁工程风险评估体系的理论框架,及建立理论框架时应考虑的诸多问题;同时对动态系统风险评估、评价因素可靠性分析技术、各种风险评估方法及评估技术的运用做了简要论述。该框架体系不仅适用于地铁工程的风险评估,同样适用于其他复杂的工程系统的风险评估评价。     

可移动危险源动态安全监控的探索与展望

简述近年来可移动危险源的严重事故及惨痛教训,究其重要原因之一就是缺乏对可移动危险源的动态安全监控,指出开展可移动危险源动态安全监控的迫切性;从而对建立可移动危险源动态安全监控体系的指导思想与功能设计进行了比较深入的探索,利用全球移动通信系统(GSM),全球定位系统(GPS),地理信息系统(GIS)和计算机网络技术相结合,对可移动危险源实施动态安全监控,以实现对其严重事故的有效控制,并对完善可移动危险源动态安全监控体系作了进一步的展望。     

矿井电网动态安全分析系统的研究

随着国民经济的迅速发展,各行各业对煤矿资源的需求越来越大,然而矿难事故的频繁发生,煤矿安全已成为迫切需要解决的首要问题。笔者针对目前的矿井供电系统存在的不足而导致的安全隐患问题,进行了深入的理论研究和技术分析。根据煤矿供电系统的实际情况,对其供电系统的动态安全分析问题进行了较全面的探讨和论述;介绍了矿井电网动态安全分析系统的功能要求、主要组成部分和结构;对各部分的实现和需要注意的问题进行了分析;给出了矿井电网动态安全分析系统的框图及系统最终要反映的信息要求。