人口统计学特征与不安全行为及其意向的关系研究

为分析人口统计学特征与不安全行为意向和不安全行为的关系,收集了7个煤矿的735名一线作业人员有效调查问卷,采用多因变量、多自变量析因方差分析方法,分析了年龄、工龄与经验、工作岗位、婚姻状况、吸烟、饮酒、家庭经济压力等变量与不安全行为意向及不安全行为的关系。结果表明:不同婚姻状况员工在不安全行为表现上有显著差异,有婚史现单身的员工更易发生不安全行为;不同工作岗位、不同饮酒状况和不同经济压力的员工在不安全行为意向上有显著差异。其中开拓掘进岗位员工、经常喝酒并常喝醉员工、承担家庭费用少于1/4的员工,以及不饮酒且承担家庭费用少于1/2的员工,较其他组员工在不安全行为意向方面有显著统计差异     

千秋煤矿2号煤层冲击倾向性判别指标研究

在对现行冲击倾向性指标分析的基础上,综合考虑煤样变形破坏过程中冲击能量效应和时间效应,提出有效冲击能量速度指数这一新的冲击倾向性判定指标。建立了煤样的单轴压缩峰值前塑性变形消耗能量的计算模型,得出了有效冲击能量速度指数的计算方法和判定准则。通过试验、分析和计算,论证了单轴抗压强度和有效冲击能量速度指数作为煤层冲击倾向性判定指标的可行性和可靠性。研究结果表明:以冲击能量指数、弹性能量指数、动态破坏时间、单轴抗压强度和有效冲击能量速度指数五个指标作为千秋煤矿2号煤层冲击倾向性判别指标,可以增强判定结果的可靠性和准确性。     

基于i1Mx-27的视频监控终端的设计和实现

介绍了一种基于新一代多媒体应用平台i.Mx-27和嵌入式Linux的图像采集和远程监控系统。阐述了系统各模块的硬件构成,系统的运行原理和软件设计。该终端实现了使远程PC通过Web浏览器方式进行实时视频监控。     

IEC61508标准指导城市轨道交通设备安全功能指标实施

IEC61508标准提出电气／电子／叮编程电子（E／E／PE）安全相关系统的功能安全,成为了电气／电子／可编程电子（E／E／PE）安全相关系统的功能安全的基本和核心标准。城市轨道交通设备越来越多地采用了电气／电子／可编程电子系统（E／E／PES）,确保这些设备功能安全指标的落实是工程建设,以及运营安全的一个重要组成环节。     

包装印刷业VOCs污染特征分析

选取了北京市的14家大型包装印刷企业进行现场采样、监测,统计分析了生产工艺和原辅材料,识别了VOCs污染来源和排放节点。根据不同排放节点的特征搭建了相应的采样系统,并以此为基础考察了VOCs的排放特征、臭氧生成潜势和二次有机气溶胶(SOA)生成潜势。结果表明:包装印刷业所排放的VOCs以醇类和酯类为主;乙醇和异丙醇为主要的臭氧前体物,生产线和烘干集气系统排气口为主要的臭氧生成节点;烷烃和醇类为主要的SOA前体物,烘干集气系统排气口为首要的SOA生成节点。     

The Relationship of Lithology and Watershed Characteristics to Fine Sediment Deposition in Streams of the Oregon Coast Range

Lithology is one of many factors influencing the amount, grain size distribution, and location of fine sediment deposition on the bed of mountain stream channels. In the Oregon Coast Range, 18 pool-riffle stream reaches with similar slope and intact riparian area and relatively unaffected by logjams were surveyed for assessment of fine sediment deposition. Half of the streams were in watersheds underlain by relatively erodible sandstone. The other half were underlain by a more resistant basalt. Channel morphology, hydraulic variables, particle size, relative pool volume of fine sediment (V*), and wood characteristics were measured in the streams. A significantly higher amount of fine sediment was deposited in the sandstone channels than in the basalt channels, as indicated by V*. Grab samples of sediment from pools also were significantly finer grained in the sandstone channels. Geographic information systems (GIS) software was used to derive several variables that might correlate with fine sediment deposition. These variables were combined with those derived from field data to create multiple linear regression models to be used for further exploration of the type and relative influence of factors affecting fine sediment deposition. Lithology appeared to be significant in some of these models, but usually was not the primary driver. The results from these models indicate that V* at the reach scale is best explained by stream power per unit area and by the volume of wood perpendicular to the flow per channel area (R² = 0.46). Findings show that V* is best explained using only watershed scale variables, including negative correlations with relief ratio and basin precipitation index, and positive correlations with maximum slope and circularity.     

Metal bioaccumulation in plant leaves from an industrious area and the Botanical Garden in Beijing

The concentrations of Fe, Mn, AI, Zn, Pb, Ni, Cr, and As were measured in soils and leaves from 21 plant species growing on hills near the Beijing Steel Factory(BSF) and 17 plant species in the Beijing Botanical Garden(BBG). The results showed that soils from BSF were Zn contaminated according to the threshold of natural background of China. There was a metal contamination of the soils by Ni,and Cr in BSF comparing with those in BBG. The comparison between concentrations of metals in leaves from both sites indicated that, in general, accumulation of metals in the leaves of the same species was significantly different between the two sites. Even within the same locality each species accumulation of metals was significantly variable. The study aimed to screen landscape plants for the capacity to clean-up toxic metals in soils, and developed an overall metal accumulation index(MAI) for leaves and then categorized the MAI that can be applied broadly in the selection of species in polluted areas. To do this, the spectrum of MAI values were divided into four classes: strongly accumulated(SA or grade I), moderately accumulated(MA or grade II), intermediately accumulated( IA or grade III), and weakly accumulated(WA or grade IV). The results showed that elemental association between Fe, AI, Ni, and As was generally highly correlated with each other in the sampling sites. This may suggest their common biochemical characteristics. Generally, those species containing strong and moderate accumulation in both sites are considered including Vitex negundo, Broussonetia papyrifera, Ulmus pumila, and Rubia cordifolia. At BSF and other industrial sites with a similar ecosystem, strong and moderate accumulation species include Sophora japonica, Ampelopsis aconitifolia var. glabra, Platycladus orientalis, Wikstroemia chamaedaphne, Cleistogenes squarrosa, Grewia biloba, and in BBG, in addition Setaria viddis, Cotinus coggygria, Lespedeza flodbunda, Rhamnus parvifolia, Lespedeza tomentosa.     

生物组织中微量砷的石墨炉原子吸收法的测定

本文参考美国EPA测定生物组织中砷的样品前处理方法,利用石墨炉原子吸收法测定生物体中砷,并确定了一套完整的样品测定的质控措施,该方法保证了生物组织中砷测定的快速、准确、可靠。     

DTC类改性糯米淀粉的制备及其吸附水中Pb2+性能

采用碱法从天然糯米中提取糯米淀粉（SS）,经环氧氯丙烷交联、醚化,邻苯二胺胺化,CS₂亲核加成,最终制备出一种新型Pb²⁺吸附剂——二硫代氨基甲酸盐（DTC）类改性糯米淀粉（DTCS）。在吸附剂加入量2.0 g/L、Pb²⁺质量浓度30 mg/L的条件下,不同阶段改性产物吸附Pb²⁺的最佳pH均为7.0,吸附平衡时间为30 min。SS对Pb²⁺的吸附去除率仅为9.1%,经改性后吸附能力逐步提高,最终产物DTCS对Pb²⁺的吸附效果最佳,Pb²⁺去除率高达99.9%,平衡吸附量为14.97 mg/g。DTCS对Pb²⁺的吸附过程符合准二级吸附动力学模型,以化学吸附为主。     

CeO2-CoO／ACF低温SCR烟气脱氮性能的研究

活性炭纤维（ACF）经硝酸处理后采用浸渍法制备了CeO2-CoO／ACF复合催化剂,测试了其在以氨气为还原剂的低温SCR过程中的催化活性,同时研究了金属氧化物浸渍顺序及负载量、催化剂煅烧温度、空速比（SV）、NH,／NO（摩尔比）、O2含量等因素对NO转化效率的影响。研究发现,负载量为10％的CeO2-CoO／ACF复合催化剂经煅烧后在120—240℃时具有很高的催化活性,并且在N0初始浓度为1000mg／m3、空速比（SV）为6000h～、NH3／NO为1．05、O：体积分数在3．0％时具有较高的NO转化效率。