Three long-range transport models compared to the ETEX experiment: a performance study

For operational or research purposes (dispersion computations of radioactive effluents during nuclear emergency situations, simulations of chemical pollution in the vicinity of thermal power plants), different models of passive dispersion in the atmosphere have been developed at the Environment Department of EDF’s R and D Division. This report presents the comparison of the performances of three such models: DIFTRA (lagrangian puff model, with operational goal), DIFEUL (three dimensional eulerian) and DIFPAR (Monte Carlo particle model) for the simulation of the first ETEX release, an international tracer campaign during which a passive tracer cloud has been followed over Europe. The results obtained in this study give model vs. experience differences of the same order as the model vs. experience differences observed during an international model comparison experiment using data of the Chernobyl release, the ATMES exercise. In addition to the standard statistical scores used in the evaluation of the performances of the transport models two asymmetric scores (in contradistinction with the Figure of Merit in Space) are proposed: “efficiency” and “power”. Their aim is to separate the two manners in which a model may be wrong: by predicting presence of pollutant while none is measured or conversely predicting absence when pollutant is actually detected.     

A statistical methodology for the evaluation of long-range dispersion models: an application to the ETEX exercise

This paper describes the statistical methodology applied to evaluate the performance of the long-range dispersion models that were used in the modelling activities of ETEX (European Tracer EXperiment). The availability of a large number of models makes this exercise rather unique. These models are used for the practical purpose to quantify the contamination effects over a vast area, following a hypothetical accidental release of harmful material. This makes the quality judgement that could be attributed to the results of each model particularly important.The statistical indicators considered to be the most effective for the evaluation of long-range dispersion models are introduced and commented, with specific examples in the frame of ETEX simulations. The importance of using several indices and critically interpreting the results is discussed.     

Testing the importance of accurate meteorological input fields and parameterizations in atmospheric transport modelling using dream - validation against ETEX-1

A tracer model, the DREAM, which is based on a combination of a near-range Lagrangian model and a long-range Eulerian model, has been developed. The meteorological meso-scale model, MM5V1, is implemented as a meteorological driver for the tracer model. The model system is used for studying transport and dispersion of air pollutants caused by a single but strong source as, e.g. an accidental release from a nuclear power plant. The model system including the coupling of the Lagrangian model with the Eulerian model are described. Various simple and comprehensive parameterizations of the mixing height, the vertical dispersion, and different meterological input data have been implemented in the combined tracer model, and the model results have been validated against measurements from the ETEX-1 release. Several different statistical parameters have been used to estimate the differences between the parameterizations and meterological input data in order to find the best performing solution.     

基于信息相对重要性的主成分法优选环境测点

提出将单项污染物测值反映的信息量表示为相对重要性和将单项污染物的相对重要性综合为多项污染物的综合相对重要性的计算公式。根据测点信息的综合相对重要性,再用主成分子集合选择法优化选点。该方法不仅减少了计算量,也易于确定多项污染物的综合优化点。该方法用于贵阳市大气环境测点优选出的测点能反映该市的环境质量。      

Multilevel air quality evolution in Shenyang: Impact of elevated point emission reduction

Visibility observed at different altitudes is favorable to understand the causes of air pollution. We conducted 4-years of observations of visibility at 2.8 and 60 m and particulate matter(PM) concentrations from 2015 to 2018 in Shenyang, a provincial city in Northeast China. The results indicated that visibility increased with the increasing height in winter(especially at night), and decreased with height in summer(especially at the daytime). PM concentration exhibited opposite vertical variati...     

涂层大气腐蚀的模糊综合评定

此文将模糊理论应用于涂层的大气腐蚀试验,针对对比性腐蚀试验结果,提出了涂层保护性能大气腐蚀模糊综合评定方法。本法具有简捷、迅速、准确等优点。     

Improved models of failure time for atmospheric tanks under the coupling effect of multiple pool fires

Fire accidents of chemical installations may cause domino effects in atmospheric tank farms, where a large amount of hazardous substances are stored or processed. Pool fire is a major form of fire accidents, and the thermal radiation from pool fire is the primary hazard of domino accidents. The coupling of multiple pool fires is a realistic and important accident phenomenon that enhances the propagation of domino accidents. However, previous research has mostly focused on the escalation of domino accidents induced by a single pool fire. To overcome the drawback, in this study, the failure of a storage tank under the coupling effect of multiple pool fires was studied in view of spatial and temporal synergistic process. The historical accident statistics indicated that the accident scenario of two-pool fires accounted for 30.6% in pool fires. The domino accident scenario involving three tanks is analyzed, and the typical layout of tanks is isosceles right triangle based on Chinese standard “GB50341-2014”. The thermal response and damage of a target tank heated by pool fires were numerically investigated. The volume of 500 m³, 3000 m³, 5000 m³ and 10000 m³ were selected. Flame temperature was obtained by FDS, and then was input onto the finite element model. The temperature field and stress field of target tanks were simulated by ABAQUS. The results showed that the temperature rise rate of the target tanks under multiple pool fires was higher than that under a single pool fire. The failure time of the tank under the coupling effect of multiple fires was lower than that under the superposition of multiple fires without the first stage. The stress and yield strength were compared to judge the failure of the target tank. The model of failure time for the tank under the coupling effect of pool fires was established. Through the verification, the deviation of this model is 4.02%, which is better than the deviation of 15.76% with Cozzani's model.     

2 000 m超深水水下分离器泄漏油气扩散特性研究

深水水下分离器服役过程中由于腐蚀、地质灾害和环境高压作用,存在失效泄漏风险。针对2 000 m超深水水下分离器可能存在的失效泄漏问题,基于计算流体动力学CFD方法,建立分离器失效泄漏后果数值仿真分析模型,对分离器泄漏场景进行模拟与分析,研究2 000 m水深条件下分离器泄漏油气扩散规律,并考虑不同泄漏位置对油气扩散行为的影响。结果表明:水下分离器泄漏包括压力扩散和自由扩散两个阶段,压力扩散阶段历时极短,自由扩散阶段耗时较长;泄漏口位置对泄漏结果有较为明显的影响,分离器上部泄漏,油气全部溢出,分离器中下部泄漏,大部分油气保留于分离器内部,最终形成分明的油气水界面;分离器内部压力随时间迅速上升,t=0.25 s左右接近于20 MPa,后期在20 MPa左右呈极微小波动,泄漏速率随分离器内部压力增大迅速减小,达到最低点之后,呈微小波动状变化。     

Phast validation of discharge and atmospheric dispersion for pressurised carbon dioxide releases

The consequence modelling package Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released substance to occur only in the vapour and liquid phases. The latest versions of Phast include extended models which also allow for the occurrence of fluid to solid transition for carbon dioxide (CO₂) releases.As part of two projects funded by BP and Shell (made publicly available via CO2PIPETRANS JIP), experimental work on CO₂ releases was carried out at the Spadeadam site (UK) by GL Noble Denton. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases (vapour storage). The CO₂ was stored in a vessel with attached pipework. At the end of the pipework a nozzle was attached, where the nozzle diameter was varied.This paper discusses the validation of Phast against the above experiments. The flow rate was predicted accurately by the Phast discharge models (within 10%; considered within the accuracy at which the BP experimental data were measured), and the concentrations were found to be predicted accurately (well within a factor of two) by the Phast dispersion model (UDM). This validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.     

Validation of discharge and atmospheric dispersion for unpressurised and pressurised carbon dioxide releases

This paper discusses the validation of discharge and subsequent atmospheric dispersion for both unpressurised and pressurised carbon dioxide releases using the consequence modelling package Phast.The paper first summarises the validation of the Phast dispersion model (UDM) for unpressurised releases. This includes heavy gas dispersion from either a ground-level line source (McQuaid wind-tunnel experiments) or an area source (Kit-Fox field experiments). For the McQuaid experiments minor modifications of the UDM were made to support line sources. For the Kit Fox experiments steady-state and 20-s finite-duration releases were simulated for both neutral and stable conditions. Most accurate predictions of the concentrations for finite duration releases were obtained using the UDM Finite Duration Correction method.Using experiments funded by BP and Shell and made available via DNV's CO2PIPETRANS JIP, the paper secondly summarises the validation of the Phast discharge and dispersion models for pressurised CO₂ releases. This modelling accounted for the possible presence of the solid CO₂ phase following expansion to atmospheric pressure. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases. Both the flow rate and the concentrations were found to be predicted accurately.The above validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.