珠芽魔芋种子5苗接力生长当年形成商品芋技术

首次提出珠芽魔芋种子具有5苗接力生长的生物学特性。种子能在一个不间断的生长周期中积累最大生物产量,避免魔芋需反复"换头"种植3—4年才能收获商品芋的低产生长模式,使魔芋的膨大系数由块茎的低于10倍提高到种子最高约7000倍,所获地下球茎重量平均达1560g。采用种子种植当年即可获用于加工的商品芋,消除了魔芋种植过程中固有的风险,使魔芋由低产作物变成高产作物,魔芋多糖总量将实现跨越式增长。     

CaH2对Cu-Ce-La-ZSM-5催化分解NO性能的影响

实验采用一步离子交换法制备Cu-Ce-La-ZSM-5催化剂,然后采用共混法制得Cu-Ce-La-ZSM-5/CaH2催化剂。采用扫描电镜（SEM）,电感耦合等离子体发射光谱（ICP-AES）,X射线衍射（XRD）,红外（FTIR）以及NO吸脱附（NO-TPD）对催化剂进行表征。结果显示CaH2的加入使得催化剂中铜离子存在形式发生变化,催化剂表面变光滑洁净,并且吸附NO能力增强。NO催化分解实验的结果表明CaH2提高了催化剂活性和抗氧性。CaH2助催性是由于其受热分解过程中产生的H2能将Cu^2＋还原为具有催化活性的Cu^＋,同时使催化剂表面洁净光滑更容易吸附NO。     

非活体生物质对水中活性艳红X-3B的吸附研究

研究了4种非活体生物质(米酒糟、花生壳、柚子皮、稻草秸秆)对模拟废水中活性艳红X-3B的吸附条件及吸附机理。结果表明,活性艳红X-3B初始浓度为100 mg/L、pH为1.0~2.0、吸附剂浓度为10 mg/L时,4种吸附剂对活性艳红X-3B的吸附率可达到80%。吸附在60 min左右达平衡后最大吸附量的顺序为:米酒糟(58.8 mg/g)花生壳(28.0mg/g)柚子皮(23.6 mg/g)稻草秸秆(19.5 mg/g)。在达最大吸附率时,米酒糟的用量可减少一半、pH范围可宽为1.0~6.0,且吸附量是另三者的2倍以上。综合比较,米酒糟具有较强的吸附废水中活性艳红X-3B的能力,可作为废水中活性染料的吸附剂使用。而花生壳、柚子皮和稻草秸秆的吸附能力相对较弱,不是理想的吸附材料。数学模型模拟表明,米酒糟和柚子皮的吸附过程更符合Freundlich方程,而花生壳和稻草秸秆更符合Langmuir方程;动力学研究表明4种吸附剂的吸附拟合更符合拟二级动力学方程。     

Metabolism of the Nonylphenol Isomer [Ring-U-14c]-4-(3′,5′-Dimethyl-3′-Heptyl)-Phenol by Cell Suspension Cultures of Agrostemma githago and Soybean

Abstract

The biotransformation of the nonylphenol isomer [ring-U-¹⁴C]-4-(3′,5′-dimethyl-3′-heptyl)-phenol (4-353-NP, consisting of two diastereomers) was studied in soybean and Agrostemma githago cell suspension cultures. With the A. githago cells, a batch two-liquid-phase system (medium/n-hexadecane 200:1, v/v) was used, in order to produce higher concentrations and amounts of 4-353-NP metabolites for their identification; 4-353-NP was applied via the n-hexadecane phase. Initial concentrations of [¹⁴C]-4-353-NP were 1 mg L^?1 (soybean), and 5 and 10 mg L^?1 (A. githago). After 2 (soybean) and 7 days (A. githago) of incubation, the applied 4-353-NP was transformed almost completely by both plant species to four types of products: glycosides of parent 4-353-NP, glycosides of primary 4-353-NP metabolites, nonextractable residues and unknown, possibly polymeric materials detected in the media. The latter two products emerged especially in soybean cultures. Portions of primary metabolites amounted to 19–22% (soybean) and 21–42% of applied ¹⁴C (A. githago). After liberation from their glycosides, the primary 4-353-NP metabolites formed by A. githago were isolated by HPLC and examined by GC-EIMS as trimethylsilyl derivatives. In the chromatograms, eight peaks were detected which due to their mass spectra, could be traced back to 4-353-NP. Seven of the compounds were side-chain monohydroxylated 4-353-NP metabolites, while the remaining was a (side-chain) carboxylic acid derivative. Unequivocal identification of the sites of hydroxylation/oxidation of all transformation products was not possible. The main primary metabolites produced by A. githago were supposed to be four diastereomers of 6′-hydroxy-4-353-NP (about 80% of all products identified). It was concluded that plants contribute to the environmental degradation of the xenoestrogen nonylphenol; the toxicological properties of side-chain hydroxylated nonylphenols remain to be examined.     

A method for the determination of rhodamine b and brilliant sulfaflavine on cotton string collectors and in a spray tank solution mixture

Abstract

A fluorescent method for the determination of rhodamine B (RhB) and brilliant sulfaflavine (BSF) dual tracers on cotton string collectors and in spray tank solutions was developed for the evaluation of the effects of adjuvants on the atmospheric drift of agricultural sprays. Both tracers on collectors were extracted with deionized water simultaneously and measured directly with a Fluorescent Specrometer by switching the maximum excitation and emission wavelengths. The linear ranges of the RhB and BSF standard curves were 0–50 and 0–10 ppb respectively. Recoveries of tracers on cotton strings ranged from 92.9% ± 1.1% to 95.1% ± 1.0% for RhB and 91.9% ± 2.8% to 103% ± 0.6% for BSF when spiked levels ranged from 0.25 to 2.5 μg per collector. The detection limit of the instrument was approximately 0.1 ppb for both tracers. The detection limits of the analytical method were approximately 0.1 ppb for RhB and 0.3 ppb for BSF when the background levels of cotton strings were subtracted. The presence of one tracer in the solution did not significantly interfere with the detection of the other tracer in the same solution. The presence of adjuvants added to the spray tank solutions did not interfere with the detection of both tracers when the adjuvants were applied at the manufacturer's maximum recommendation rates.     

湿式空气氧化法处理TNT红水的影响因素

使用湿式空气氧化技术与生物技术联合处理TNT精制阶段所产生的红水,研究了湿式空气氧化过程中反应温度、反应时间、初始压强和pH值对流出物的COD值与流出物可生化性的影响规律。研究结果表明,随着反应温度和反应初始压强的升高、反应时间的延长、催化剂投加量的增加和反应pH值的降低,出水COD值均有所下降。在温度为300℃、初始压强为14MPa、反应时间为2h、pH值为5,3、铁盐催化剂添加量为2g的条件下,出水COD值为498mg／L,COD去除率可达到99．27％。在温度为300℃、初始压强为11MPa、反应时间为1h、pH值为3、添加1g铁盐催化剂的条件下：反应流出物的BOD5／COD值为0．301,此时可生化性已经得到很好改善。通过生物方法对反应流出物后续处理发现,湿式空气氧化技术处理TNT红水在反应温度300℃以上,反应流出物均可生物降解。     

三维有机LDH的制备及其对有机物的普适性吸附

以表面活性剂十二烷基硫酸钠(SDS)为软模板剂,制得有机三维花状层状双金属氢氧化物(3D-SLDH).采用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线能谱仪(EDS)和N2吸附-脱附等表征手段对3D-SLDH的结构进行表征,确定最佳合成尿素浓度,并通过静态吸附实验考察了3D-SLDH对金橙Ⅱ(AO7)、罗丹明...     

极端嗜热菌海栖热袍菌木聚糖酶B的克隆和表达

极端嗜热菌海栖热袍菌MSB8(ThermotogamaritimaMSB8)能够利用木聚糖代谢 ,并具有两个产木聚糖酶的基因 .本研究首次克隆和在大肠杆菌中表达海栖热袍菌MSB8的第 2个木聚糖酶基因即xynB基因 .以基因组DNA为模板 ,根据xynB基因的全序列设计了两对引物 ,在合适的PCR反应条件下有效地扩增出了xynB基因片段 .选用pET2 8a(+)表达载体 ,NcoI-HindⅢ酶切位点并编码了羧基端 6×His标签的阳性克隆表达成可溶且具有生物活性的蛋白质 .xynB结构基因由 10 4 4对碱基组成 ,编码 347个氨基酸 .根据已知木聚糖酶蛋白质氨基酸的同源性分析 ,XynB与T .sp.strainFjSS3-B .1的XynA的同源性最大 ,为 85 % ,与T .neapolitana的XynB同源性次之 ,为 82 % ,与其它木聚糖酶的同源性小于 4 3% .另外 ,XynB属于F/ 10族木聚糖酶 ,且含有单一功能区 .表 3图 3参 12     

杭州大气颗粒物散射消光特性及霾天气污染特征

2011年7月~2012年6月期间,对大气散射系数、颗粒物浓度及气象因子进行同步观测,以评估颗粒物散射消光对杭州市大气能见度的影响.结果表明,杭州市大气颗粒物散射系数日均值变化范围为108.4~1 098.1 Mm-1,年均值为428.62Mm-1±200.2 Mm-1.散射系数呈明显的季节变化,秋冬高,夏季低.日变化呈典型的双峰型,早峰出现在08:00,晚峰出现在21:00.PM2.5和PM10的散射效率分别为7.6 m2·g-1和4.4 m2·g-1,颗粒物散射消光占总消光比例的90.2%.灰霾和重度灰霾天气下,散射系数分别为684.4 Mm-1±218.1 Mm-1和1 095.4 Mm-1±397.7 Mm-1,达到非霾天气的2.6和4.2倍,表明颗粒物散射消光作用是导致杭州市大气能见度下降和灰霾天气发生的主要因素.     

草酸浸取废SCR催化剂制备光催化剂

采用草酸浸取废SCR催化剂,得到钛钨粉,制备Bi₂WO₆/钛钨粉复合光催化剂,考察了其对罗丹明B的光催化降解性能。制备光催化剂的优化工艺条件为：采用聚乙烯吡咯烷酮为表面活性剂,n（Bi₂WO₆）∶n（钛钨粉）=2∶1,前驱液pH为5,水热反应时间为18 h。在此条件下制备的光催化剂在可见光下降解罗丹明B,反应 60 min,罗丹明B降解率达94.30%。表征结果显示：钛钨粉小颗粒散落在Bi₂WO₆片表面,为光催化反应提供了更多的活性位点;Bi₂WO₆和钛钨粉两者结合可提高光生电子和空穴的分离效率,进而提高催化剂的光催化活性。Bi₂WO₆/钛钨粉光催化剂对罗丹明 B 的降解符合一级反应动力学规律。