Numerical Simulations of the Urban Roughness Sub-Layer : A First Attempt

Most of the mesoscale models use roughness parameters to characterise the ground and to compute the surface stress. As the experimental determinations of the urban roughness parameters are rare and not very reliable, a new methodology based on microscale numerical simulations is presented here and the first results from two-dimensional simulations with different roof shapes are analysed.Firstly, it appears that the roof shape has a large influence : large difference in the Reynolds stress profile and in the roughness sub-layer thickness, enhancement of the exchanges at the roof level by buildings with attic. It also appears that the fetch necessary to obtain a constant flux layer is unrealistic compared to the real spatial homogeneity of quarters in European cities. Consequently, a new parameterisation of the urban ground-induced friction is to be developed without reference to the constant flux layer theory.     

A New Approach to Plant Diversity Assessment Combining HPLC Data, Simplex Mixture Design and Discriminant Analysis

The quantitative assessment of plant diversity and its monitoring with time represent a key environmental issue for management and conservation of natural resources. Assessment of plant diversity could be based on chemical analyses of secondary metabolites (e.g. flavonoids, terpenoids), because of the substantial quantitative and qualitative between-individual variability in such compounds. At a geographical scale, the plant populations become widely dispersed, and their monitoring from numerous routine individual analyses could become restricting. To overcome such constraint, this study develops a multivariate calibration model giving the relative frequency of a particular taxon from a simple high-performance liquid chromatography (HPLC) analysis of a plant mixture. The model was built from a complete set of mixtures combining different taxons, according to an experimental design (Scheffé’s matrix). For each mixture, a reference HPLC pattern was simulated by averaging the individual HPLC profiles of the constitutive taxons. The calibration models, based on Bayesian discriminant analysis (BDA), gave statistical relationships between the contributions of each taxon in mixtures and reference HPLC patterns of these mixtures. Finally, these models were validated on new mixtures by using outside plants. This new biodiversity survey approach is illustrated on four chemical taxons (four chemotypes) of Astragalus caprinus (Fabaceae). The more differentiated the taxon, the better predicted its contributions (in mixtures) were by BDA calibration model. This new approach could be very useful for a global routine survey of plant diversity.     

基于虚拟样机的自卸汽车卸载作业侧翻分析

针对自卸汽车卸载作业时发生的侧翻问题,分析影响自卸汽车作业安全的因素.根据自卸汽车结构及其作业特点,建立自卸汽车整车虚拟样机模型.采用多体系统动力学分析软件(ADAMS),对自卸汽车在不同横向坡度卸载作业的安全性进行仿真分析,得到自卸汽车安全作业的举升角与路面横向坡度、装载重量间的关系.结果表明,一定载荷条件下,横向坡度越大,临界举升角越小; 横向坡度相同时,载重越大,临界举升角越小; 未正常卸载工况的临界举升角小于正常卸载工况的.本研究为减少或避免自卸汽车卸载作业时的侧翻事故提供了参考依据.     

建筑物消防系统可靠性分析

为评估建筑物消防系统的可靠性,首先将系统分为探测报警系统和灭火系统等部分,再用事件树法分析事故发生时消防系统不同部分的反应情况.通过贝叶斯理论及历史统计数据得到系统失效率的不确定性概率分布,建立消防系统可靠性随时间变化的数学模型; 用蒙特卡罗方法模拟求得系统可靠性的时间函数并对模型的不确定性参数进行敏感性分析.该方法将统计数据与经验公式、理论方法相结合,并利用蒙特卡罗方法处理模型中的不确定性,不仅能够有效估计消防系统的可靠性,还可对其他类似系统的可靠性进行分析,并通过敏感性分析为进一步减少估计的不确定性提出合理建议.     

重型自卸汽车车架横梁异常断裂原因分析

针对无副车架的重型自卸汽车在使用过程中出现的车架横梁异常断裂问题,建立了以板壳单元为基本单元的自卸汽车车架有限元分析模型,采用NASTRAN有限元分析软件对车架强度进行分析.有限元分析结果表明,车架横梁异常断裂现象是横梁连接部位应力值大于材料的屈服强度引起的,这与实车车架断裂结果吻合.根据实际工艺要求,改造车架结构,将连接第2根横梁和纵梁的L板厚度变大,并将平衡悬架推力杆支座由整体式支撑改为分体式支撑,从而使两处的最大应力值分别比原结构下降20.4%和51.7%.改进后车架断裂区的强度明显提高,这表明改造方法有效.     

航班起飞过程的风险识别与控制

飞机起飞阶段是事故多发阶段,为了进行风险识别与控制,设计了定性判别方法和定量计算仿真算法,并以具体飞机坠毁事故为例分析了安全裕度.分别计算了飞机冲出跑道的速度、距离和逃生时间.中断起飞的速度与时间,是火灾发生后的判断关键,也构成了飞机起飞事故的裕度.结果表明,中断起飞的安全裕度比坠毁的大,且关于中断起飞的规定有矛盾之处;用于逃生的90 s规则高于中断起飞的决断速度的限制规定.该分析方法为处理危急时刻的两难决策问题提供了理论指导.     

出口角度对防烟空气幕防烟效果影响的数值模拟

利用火灾动力学模拟软件FDS,以四川消防研究所高层实验塔二层为原型,模拟在不同防烟空气幕出口角度情况下高层建筑前室烟气运动情况,获得在其他条件不变情况下,空气幕运行时的最佳出口角度。试验结果表明:空气幕角度为5°及20°时,模拟试验后期烟气基本突破了空气幕蔓延至前室内,而当出口角度为10°和15°时防烟效果较好,且15°时防烟效果优于10°,故推荐空气幕运行时的最佳出口角度为15°。     

建筑火灾烟气中CO迁移规律的FDS模拟

以T型"侧间-走廊"典型建筑火灾为模拟对象,分析烟气在走廊中的水平和垂直流动特征,并对火源房门高低、走廊端头启闭和多房门启闭等场景使用火灾模拟软件(FDS)进行了模拟和远距离房间CO浓度的迁移规律的分析。结果表明:烟气从火源房间经拱腹溢出在走廊中形成受限空间的顶棚射流;门檐高度决定了CO能够在走廊中的迁移量;烟气在走廊远距离封闭端头形成上部的热烟气层,中部回流层和下层的补气层;其中中部烟气回流层的高低、流速和CO浓度是影响临近非火源房间CO浓度的重要因素。走廊启闭和多房门火灾场景的模拟结果也进一步证明了CO的迁移规律。     

矿井瓦斯煤尘爆炸传播数值模拟研究

基于连续相、燃烧、颗粒相数理方程建立瓦斯煤尘爆炸传播数理模型,并应用连续相、颗粒相计算方法,依据大型巷道瓦斯爆炸、瓦斯煤尘爆炸传播实验数据,借助普遍应用的流场模拟平台,成功开发瓦斯、煤尘爆炸数值模拟系统。该系统可有效地模拟煤矿瓦斯、煤尘的爆炸事故过程,对瓦斯爆炸的爆燃转爆轰、煤尘是否参与爆炸、爆炸冲击传播速度、衰减规律以及爆炸灾害的波及范围都能进行较准确的模拟。     

人群疏散行为仿真技术研究

提出并建立了一种人群疏散仿真模型。针对疏散空间中障碍物的动态布局,采用网格法获得各障碍物包围盒坐标,依据最短路径原则采用几何法确定每个个体起始疏散路径,解决了人群疏散的空间连续性问题。针对人群疏散时个体之间的差异性,依据个体与个体之间的作用力、摩擦力动态改变个体的行进方向,以及依据人群密度采用人群疏散速度模型实时确定每个个体的运动速度,解决了个体之间的动态避碰、绕行和超越等问题。针对人群疏散时多个出口的选择问题,提出了把出口拥挤状态与个体心理慌乱状态相结合的出口选择方法。最后采用粒子系统实现了上述人群疏散行为的二维仿真并取得了较好的效果。