多种复合材料固定化反应器的对比研究

选用活性炭、海砺壳2种材料作为固定化载体,对改良型UASB系统去除COD的性能进行研究,结果表明选择既高柱又循环且增加载体填充体积的系统,可有效去除高浓度有机废水的COD,但当填充载体过高时,循环系统难以实现,并存在憋气的可能。     

多层频率选择表面复合吸波结构的研究

文中采用一种快速求解方法——半解析半数值法计算多层频率选择表面(Frequency Selective Surface,简称FSS)复合结构的反射系数,然后结合具体两层复合结构的实例通过测试验证了半解析半数值法的正确性,并基于复合结构吸波材料吸波频带窄的缺点,在此基础上,设计出一种新的圆形FSS复合结构吸波材料。计算和测试结果都表明,这种新的复合结构在较宽带宽内具有低反射系数。     

Adsorption characteristics and mechanism of Cr （Ⅵ） on chitoan-yttrium porous microsphere

以壳聚糖和Y2（OH）5NO3为原料通过乳液交联法制备了壳聚糖-钇（Ch—Y）复合微球,通过扫描电镜、透射电镜、X射线衍射、红外光谱等方法对其表面形貌、结构进行了表征.探讨了溶液的pH值、反应时间、投加量、离子初始浓度对其吸附性能的影响.研究结果表明,壳聚糖-钇（Ch—Y）复合微球在pH值为3的酸性环境中对Cr（Ⅵ）保持了较高的吸附能力,吸附容量为52.39mg·g-1,其吸附行为符合Langmuir吸附等温模型;通过吸附机理的研究,发现壳聚糖-钇（Ch—Y）对Cr（Ⅵ）吸附是化学吸附静电吸附协同氧化Cr（Ⅵ）离子作用来实现的.     

CF8611/AC531复合材料的实验室加速老化行为研究

目的获得CFRP的老化行为规律,研究紫外辐照、温度和湿度等环境因素的影响,方法以湿热效应和光氧老化的等量、等效损伤为原则,确定实验室加速老化环境谱编制方法。以CF8611/AC531复合材料为对象,依据确定的加速老化试验方案,开展加速老化试验,观察其微观形貌,并测量开路电位和动电位极化曲线。结果老化前,CFRP表面完整无裂纹,碳纤维/树脂界面结合良好;老化后,树脂基体出现裂纹和孔洞,同时界面遭到破坏。极化曲线随着老化时间的增长会向右下方移动,自腐蚀电位微降,幅度为0.0326 V,自腐蚀电流密度增长了近1621倍。结论加速老化导致表面碳纤维裸露面积不断增大,时间越长,破坏作用越明显,实际使用中应防止其与金属直接接触。     

低浓度CO2在聚苯胺/Y分子筛复合材料上的吸附

根据原位聚合方法将不同量的苯胺分别聚合在Y分子筛上,得到3种聚苯胺(PANI)/Y分子筛复合材料PANI-Y~(-1)、PANI-Y-2及PANI-Y-3,用傅立叶红外及氮气吸附实验表征了材料的结构特征,探讨了复合材料对常压下低浓度CO_2的吸附及再生性能.结果表明,苯胺在Y分子筛上成功聚合,复合材料的比表面积分别为52、54和35 m2·g~(-1),孔道由大孔和少量中孔组成,微孔极少.PANI负载量越大,材料的孔容越低.20℃下,初始体积分数为10%的CO_2在复合材料与Y分子筛上的吸附符合Logistic模型,吸附量的顺序为PANI-Y-2(2.09 mmol·g~(-1))PANI-Y-3(1.79 mmol·g~(-1))PANI-Y~(-1)(1.07 mmol·g~(-1))Y分子筛(0.80 mmol·g~(-1)),复合材料对CO_2的吸附受PANI负载量和比表面积的共同影响.在2%~10%的范围内,CO_2在复合材料上的吸附量随初始体积分数增加而增加;在25~65℃下,吸附量随温度升高而降低.80℃下,PANI-Y-2的4次热再生效率较差,仅68%;采用氨水/热再生相结合的方式脱附CO_2,再生率提高到94%.     

Recent advances in thin film composites membranes for brackish groundwater treatment with critical focus on Saskatchewan water sources

Drinking water scarcity is an ever-increasing global concern. This issue appears as a greater threat to the countries with no access to sea water resources or rivers, since their potential water resources are only limited to ground waters only. There are serious concerns with the treatment of ground water resources, including landfill leachates, agricultural contaminations (pesticides, herbicides, and fertilizers), and rural contaminations. Membrane separation has been proved to be the governing technology in water and wastewater treatment plants, as these methods are responsible for more than half of the market share of the world's desalination capacity. This study intends to offer a holistic view of the groundwater contamination with specific focus on Saskatchewan province in Canada, and the recent efforts in the groundwater treatment using thin film composite membrane technology. This study begins with an introduction of the general aspects of ground water and membrane separation, polluting agents, and their sources. It is followed by a discussion of Saskatchewan's groundwater status and various issues. Furthermore, the recent research that became available since 2010 is reviewed in details and the results are summarized with respect to purification efficiency. Different affecting parameters in a groundwater-thin film composite system are synthesized and an in-depth overview is presented.     

“Measuring Sustainability”: A Multi-Criterion Framework

So far, the elementary question of whether one country’s or region’s economy is moving towards sustainability or away from it cannot be answered with unanimous consensus on the ‘measuring rod(s)’ to be employed. The main assumption of this article is that sustainability assessment needs a set of multi-dimensional indicators. From this assumption a question arises: how could such indicators be aggregated? Often, some indicators improve while others deteriorate. For instance, when incomes grow, SO₂ might go down while CO₂ increases. It has to be noted that this is the classical conflictual situation studied in multi-criteria decision theory. The use of a multi-criterion framework for making operational the ‘measuring of sustainability’ is discussed here by means of illustrative examples and more formal arguments.     

考虑过渡区影响的粉喷桩复合地基承载特性的有限元数值分析

粉喷桩成桩过程中不可避免地会带动桩间土产生强烈的挤压和振动,在固化剂与桩体发生物理化学反应的同时,桩周一定范围内的土体也进行了固化和挤密,使得在桩土交界处形成环向变化的过渡区,过渡区的材料由桩逐渐过渡到桩间土,因此有必要考虑该过渡区对粉喷桩复合地基承载特性的影响。本文从粉喷桩复合地基桩土交界处的特点出发,考虑了桩土材料性质变化的过渡区单元,利用上的摩尔—库仑本构模型,和Plaxis专业岩土软件对粉喷桩复合地基进行了有限元数值分析,就粉喷桩复合地基中桩和土的承载特性得出了一些有益的结论。     

飞机用铝合金-CFRP搭接结构的电偶腐蚀预测研究

目的通过有限元仿真,预测飞机复合材料-铝合金搭接试件可能产生的腐蚀部位和腐蚀深度。方法采用动电位极化的方法,测得温度为40℃的5%NaCl溶液中铝合金和复合材料两种材料的极化曲线。以极化曲线及其拟合的电化学动力学参数作为边界条件,建立电偶腐蚀仿真模型。通过模型计算,分别得到两种材料的腐蚀预测结果,将其结果与实验室腐蚀试验结果进行对比。结果电偶试件模型预测得到的电偶电位值与实验测量得到的电偶电位值对比误差为4.2%。搭接试件的腐蚀部位为偶接处3 mm内,其腐蚀分布与搭接件电偶腐蚀模型预测的电位分布规律基本一致,腐蚀深度的预测值和腐蚀实验的实测值对比误差为12.5%。结论该研究的仿真预测结果与试验结果在一定程度上具有一致性,证明了仿真模型的正确性。     

添加剂升温烧蚀法在制备新型介孔水环境净化材料中的应用

首次探索了一种破坏式造孔与有机复合相结合的新方法以制备介孔复合水环境净化材料,使最终产品成为一种具有广谱孔结构分布的复合环境材料。详细介绍了该方法的第二步工艺即添加剂升温烧蚀法,在优化后的最佳条件下,产品的孔径得到了进一步扩大,其中部分孔道直径可达至介孔级,同时材料的表面得到了进一步活化。经此步工艺后,所制备的中间产品染料吸附量是原材料的194倍,是酸洗刻蚀后产品的122倍;24h吸湿率是原材料的38倍,是酸洗刻蚀后产品的19倍。