啤酒酵母吸附镉离子的试验研究

研究了啤酒酵母对镉的生物吸附过程．结果表明．啤酒酵母吸附镉的速度是非常快的;pH对镉的吸附影响较大,吸附较佳的pH范围为4～8,并且啤酒酵母有调节pH的作用,pH为4～8的溶液在吸附反应后,其pH接近于5．8：温度、酵母用量、Cd^2 的初始浓度对吸附均有一定的影响。实际含镉废水处理结果表明．啤酒酵母处理含镉废水是有效的。     

Long‐term desorption kinetics of Cu2+from biosorbent in water and seawater

A long‐term study of the desorption kinetics of Cu²⁺from biosorbent materials in water and seawater environments was carried out. The biosorbents were un‐treated and pre‐treated biomass of marine alga Durvillaea potatorum.The pre‐treatment of the biomass was carried out with calcium chloride (CaCl₂) solution followed by thermal treatment. The biosorbents were loaded with Cu²⁺in batch adsorption experiments and the desorption kinetics were measured in water and seawater in static batch desorption experiments for a period over 10 months. The physical and structure characteristics of the biosorbents were also examined under a microscope. The un‐treated biosorbent structure completely broke down in 2 and 1 months in water and seawater environments, respectively. The pre‐treatment procedure applied improved the biosorbent stability and its long term desorption rate was extremely low.     

Biosorption of cadmium by Myriophyllum spicatum L. and Myriophyllum triphyllum orchard

The aim of this study was to characterize the biological treatment of heavy metal-contaminated water employing Myriophyllum species, namely M. spicatum L. and M. triphyllum. Both species were found to be capable of removing cadmium (Cd) from water; the latter significantly outperformed. Myriophyllum species were treated with 0, 2, 4, 6, 8, 16 mg l⁻¹ cadmium solutions for 24, 48, 72, 96 h, respectively. Cd uptake of both species was the lowest at 2 mg l⁻¹ and the highest at 16 mg l⁻¹. Concentration related cadmium stress on both species exhibit significant difference on pigment levels (8–16 mg l⁻¹). These findings contribute to the fact that submerged aquatic plants can be used for the removal of heavy metals.     

Batch and continuous biosorption of Cu by immobilized biomass of Arthrobacter sp.

The ability of free and polysulphone immobilized biomass of Arthrobacter sp. to remove Cu²⁺ ions from aqueous solution was studied in batch and continuous systems. The Langmuir and Freundlich isotherm models were applied to the data. The Langmuir isotherm model was found to fit the sorption data indicating that sorption was monolayer and uptake capacity (Q^o) was 175.87 and 158.7 mg/g for free and immobilized biomass respectively at pH 5.0 and 30 °C temperature, which was also confirmed by a high correlation coefficient, a low RMSE and a low Chi-square value. A kinetic study was carried out with pseudo-first-order reaction and pseudo-second-order reaction equations and it was found that the Cu²⁺ uptake process followed the pseudo-second-order rate expression. The diffusivity of Cu²⁺ on immobilized beads increased (0.402 × 10⁻⁴ to 0.435 × 10⁻⁴ cm²/s) with increasing concentration from 50 to 150 mg/L. The maximum percentage Cu²⁺ removal (89.56%) and uptake (32.64 mg/g) were found at 3.5 mL/min and 20 cm bed height. In addition to this the Bed Depth Service Time (BDST) model was in good agreement with the experimental data with a high correlation coefficient (>0.995). Furthermore, sorption and desorption studies were also carried out which showed that polysulphone immobilized biomass could be reused for up to six sorption–desorption cycles.     

Removal of chromium (VI) from aqueous solution using walnut hull

In this study, removal of chromium (VI) from aqueous solution by walnut hull (a local low-cost adsorbent) was studied. The extent of adsorption was investigated as a function of solution pH, contact time, adsorbent and adsorbate concentration, reaction temperature and supporting electrolyte (sodium chloride). The Cr (VI) removal was pH-dependent, reaching a maximum (97.3%) at pH 1.0. The kinetic experimental data were fitted to the first-order, modified Freundlich, intraparticle diffusion and Elovich models and the corresponding parameters were obtained. A 102.78 kJ/mol Ea (activation energy) for the reaction of chromium (VI) adsorption onto walnut indicated that the rate-limiting step in this case might be a chemically controlled process. Both the Langmuir and Freundlich isotherms were suitable for describing the biosorption of chromium (VI) onto walnut hull. The uptake of chromium (VI) per weight of adsorbent increased with increasing initial chromium (VI) concentration up to 240-480 mg/L, and decreased sharply with increasing adsorbent concentration ranging from 1.0 to 5.0 g/L. An increase in sodium chloride (as supporting electrolyte) concentration was found to induce a negative effect while an increase in temperature was found to give rise to a positive effect on the chromium (VI) adsorption process. Compared to the various other adsorbents reported in the literature, the walnut hull in this study shows very good promise for practical applicability.     

Optimization of the continuous biosorption of copper with sugar-beet pectin gels

Sugar-beet pectin xerogels obtained from residues of the sugar industry are an adequate material for metal recovery from effluents in continuous systems. The xerogels were used as a biosorbent for copper removal in a fixed-bed column. The performance of the system was evaluated in different experimental conditions: flow rate, bed height, inlet metal concentration and feeding system (drop and reverse). The effect on the biosorption parameters (saturation time, amount of adsorbed and treated metal, column performance and metal uptake) and the shape of the breakthrough curves was determined. The saturation time increased with increasing bed height but decreased with increasing feed flow rate and inlet metal concentration. Preferential flow channels greatly influenced the metal uptake and column performance. Copper was completely desorbed with 0.1 M HNO₃. Additionally, the column data fitted both the linear and nonlinear expressions of the Thomas model.     

五氯苯酚在厌氧颗粒污泥中的吸附研究

在血清瓶中进行的分批实验中,研究了UASB和EGSB反应器厌氧颗粒污泥对五氯苯酚(PCP)的吸附、解吸规律.结果表明,吸附和解吸在接触PCP 2.5 h内达到平衡,吸附和解吸过程都符合Freundich等温方程,PCP的吸附机制为恒定的分配吸附.来自UASB反应器中活的颗粒污泥吸附能力大于灭活的颗粒污泥,Freundich等温方程吸附常数K值分别为0.557 0和0.037 9.UASB反应器颗粒污泥对PCP的吸附能力大于EGSB反应器颗粒污泥,Freundich等温方程吸附常数K值分别为0.557和0.263.     

Biosorption of uranium by chemically modified Rhodotorula glutinis

The present paper reports the biosorption of uranium onto chemically modified yeast cells, Rhodotorula glutinis, in order to study the role played by various functional groups in the cell wall. Esterification of the carboxyl groups and methylation of the amino groups present in the cells were carried out by methanol and formaldehyde treatment, respectively. The uranium sorption capacity increased 31% for the methanol-treated biomass and 11% for the formaldehyde-treated biomass at an initial uranium concentration of 140 mg/L. The enhancement of uranium sorption capacity was investigated by Fourier transform infrared (FTIR) spectroscopy analysis, with amino and carboxyl groups were determined to be the important functional groups involved in uranium binding. The biosorption isotherms of uranium onto the raw and chemically modified biomass were also investigated with varying uranium concentrations. Langmuir and Freundlich models were well able to explain the sorption equilibrium data with satisfactory correlation coefficients higher than 0.9.     

Uptake of chromium by Aspergillus foetidus

Aspergillus foetidus has the ability to take up chromium during the stationary phase of growth and under growth-nonsupportive conditions. We observed a 97% decrease in hexavalent chromium (initial concentration 5 µg/g) at the end of 92 h of growth, which may be due to its reduction to Cr (III) and/or complexation with organic compounds released due to the metabolic activity of the fungus. Replacement culture studies under growth-nonsupportive conditions revealed that the maximum uptake of Cr (VI) at pH 7.0 is 2 mg/g of dry biomass. At low or high pH values, Cr (VI) uptake is significantly reduced. In addition, the initial rate of total chromium uptake is also enhanced by higher biomass concentrations and the presence of glucose. The results obtained through this investigation indicate the possibility of treating waste effluents containing hexavalent chromium using Aspergillus foetidus.     

Biosorption of chromium(VI), nickel(II) and copper(II) ions from aqueous solutions using Pithophora algae

The biosorption of heavy metals is considered to be one of the best alternatives for the treatment of wastewater. The metal binding capacity of algae and acid-treated algae is investigated to find out the removal characteristics of Cr(VI), Ni(II) and Cu(II) ions from single metal solutions. Batch experiments are conducted and the study is extended to investigate the effect of pH, amount of adsorbent and adsorbate concentration on the extent of biosorption. The results indicate that the adsorption capacity of algae depends strongly on pH. The maximum adsorption of Cr(VI), Ni(II) and Cu(II) occurs at pH values of 2, 7 and 4.3, respectively. The adsorption process follows first-order kinetic equation. The data obtained are correlated with Freundlich and Langmuir adsorption isotherms.