Effect of Al2O3 particle size reduction on aluminium dust explosion

To investigate the effect of Al₂O₃ particle size on an aluminum explosion, the overpressure and flame velocity in a vertical duct were evaluated. The results show that the inhibitory effect of submicron Al₂O₃ is best, while the inhibitory effect increases with increasing inerting ratio. However, the inhibitory effect of micron Al₂O₃ does not increase significantly after the inerting ratio exceeds 40%. For high-concentration aluminum powder, 0.8 μm Al₂O₃ with an inerting ratio less than 20% promotes aluminum explosion. As the inerting ratio increases beyond 20%, however, the overpressure decreases. Furthermore, Al₂O₃ inhibits the formation of the intermediate product AlO and decreases the flame brightness. As the inerting ratio of 0.8 μm Al₂O₃ reaches 50%, the white patches in the flame image disappear. The results of scanning electron microscopy showed that the explosion products agglomerate and some dot-like protrusions appear on the surface of the unburned aluminum particles. The inhibition mechanism was qualitatively investigated. Physical heat absorption is proven to play a limited role. Thermal radiation and chemical inhibition play a key role. The chemical effect mainly influences the surface reaction energy source.     

Carbonaceous aerosols in PM10 and pollution gases in winter in Beijing

An intensive observation of organic carbon (OC) and element carbon (EC) in PM10 and gaseous materials (SO2, CO, and O3,) was conducted continuously to assess the characteristics of wintertime carbonaceous aerosols in an urban area of Beijing, China. Results showed that the averaged total carbon (TC) and PM10 concentrations in observation period are 30.2±120.4 and 172.6±198.3 μ/m3, respectively. Average OC concentration in nighttime (24.9±19.6 μ/m3) was 40% higher than that in daytime (17.7±10.9 μ/m3). Average EC concentrations in daytime (8.8±15.2 μ/m3) was close to that in nighttime (8.9±15.1 μ/m3). The OC/EC ratios in nighttime ranging from 2.4 to 2.7 are higher than that in daytime ranging from 1.9 to 2.0. The concentrations of OC, EC, PM10 were low with strong winds and high with weak winds. The OC and EC were well correlated with PM10, CO and SO2, which implies they have similar sources. OC and EC were not well correlated with O3. By considering variation of OC/EC ratios in daytime and night time, correlations between OC and O3, and meteorological condition, we speculated that OC and EC in Beijing PM10 were emitted as the primary particulate form. Emission of motor vehicle with low OC/EC ratio and coal combustion sources with high OC/EC ratio are probably the dominant sources for carbonaceous aerosols in Beijing in winter. A simple method was used to estimate the relative contribution of sources to carbonaceous aerosols in Beijing PM10. Motor vehicle source accounts for 80% and 68%, while coal combustion accounts for 20% and 32% in daytime and nighttime, respectively in Beijing. Averagely, the motor vehicle and coal combustion accounted for 74% and 26%, respectively, for carbonaceous aerosols during the observation period. It points to the motor vehicle is dominant emission for carbonaceous aerosols in Beijing PM10 in winter period, which should be paid attention to control high level of PM10 in Beijing effectively.     

热泵蒸发及其在浓缩垃圾渗滤液中应用的初探

在热泵蒸发过程中,二次蒸汽压缩比是个至关重要的参数,它直接关系到热泵蒸发的经济程度。对热泵蒸发中的传热过程及可利用的余热作了全面分析。最后对热泵蒸发在浓缩垃圾渗滤液中的应用进行了探讨。     

复合曝气生物滤池运行参数的试验研究

以宜兴市华骐污水处理厂的二级出水作为研究对象,研究碳氮比、水力负荷和气水比对复合曝气生物滤池运行的影响。研究发现,以葡萄糖作碳源,当碳氮比6:1时,滤池对总氮的去除率能达到80%以上,出水亚硝酸盐浓度很低。保持碳氮比为6,随着水力负荷的增大,滤池对总氮的去除率会有所下降,但增大到3.5 m/h时,去除率仍保持在60%以上;水力负荷对于浊度和COD的去除率影响不是很大。随着气水比的增大,好氧段对于COD的去除率呈上升趋势。     

浅谈城市排水体制的选择及建设

城市排水系统是城市重要的基础设施,是污水收集和集中处理的关键,是污水处理保护水资源和改善环境的必要手段。而排水体制的选择需要结合当地的城镇及工业企业的规划、环境保护的要求、污水利用情况、原有排水设施、水质、水量、地形、气候和水体等条件综合考虑。     

气体稳定同位素比质谱法分析本底大气CO2的δ13C和δ18O

将商用MAT253稳定同位素比质谱仪、Airtrap高效预浓缩气体捕集阱与自加工16口自动进样器集成,建立了高精度气体稳定同位素比质谱分析系统,用于程序化自动分析本底大气CO2的δ13C和δ18O.气样分析时用工作标气定量并穿插目标气测定,还定期用实验室上一级标气对工作标气和参比气进行标校,以保证分析结果的可靠和可比.结果表明,利用不同稳定同位素比范围的标气重复进样测试,发现该系统对δ13C和δ18O的分析精度分别优于0.03‰和0.06‰,能基本满足本底大气CO2的碳氧稳定同位素比分析需求和WMO/GAW质量目标.     

速分球生物滤柱处理低C/N比废水脱氮除磷研究

速分球生物滤柱是速分技术与曝气生物滤池技术的结合。具有污泥消化和无需反冲洗等优点。实验采用速分球生物滤柱实验装置,以低C/N比生活污水为处理对象,考查了单污泥前置反硝化A2/O系统的脱氮除磷特性。实验结果表明,在平均C/N比为1.6,内回流比R为100%的条件下,平均进水COD、氨氮、TP分别为440.7、274.0和13.6 mg/L,平均去除率分别为77.0%、19.2%和42.4%。系统对氨氮的去除率较低,对总磷的去除率要明显高于对氨氮的去除率。结论得出,系统脱氮除磷的效果不理想。     

基于QAA算法的巢湖悬浮物浓度反演研究

QAA(quasi-analytical algorithm)算法基于辐射传输原理,估算水体后向散射系数,是目前较为成熟的半分析模型方法.2009年6月对巢湖水体进行野外实测,在获得遥感反射率、吸收衰减系数、悬浮物浓度(cTSM)等数据的基础上,构建了巢湖水体cTSM的近红外双波段反演模型,并将QAA算法计算得到的后向散射概率作为输入,以期提高cTSM的反演精度.结果表明,①对巢湖水体而言,807 nm和834 nm是构建近红外双波段模型的最佳波段,807 nm处的单位散射系数为0.411 m2.g-1,834 nm处的单位散射系数为0.395 m2.g-1;②利用QAA算法计算得到的巢湖水体的后向散射概率为0.029,将该值输入反演模型后,cTSM的反演精度与输入其他经验值相比得到明显提高,反演值与实测值的均方根误差RMSE和平均相对误差绝对值MAPE分别达到12.143 mg.L-1和24.378%;③在cTSM较高的站点(近似高于30 mg.L-1),利用近红外双波段模型反演的悬浮物浓度结果更为稳定和可靠.     

海洋干湿交替环境下电偶腐蚀及其研究方法进展

主要分析了海洋干湿交替环境下干湿比、间浸频率、盐分浓缩、腐蚀产物等因素对电偶腐蚀的影响。简单介绍了电偶腐蚀研究方法如浸泡法、电化学实验法,以及近年来电偶腐蚀研究新技术,指出电偶腐蚀研究中面临的问题并对今后电偶腐蚀研究方向进行展望。     

河道型水库支流库湾营养盐动态补给过程

河道型水库支流库湾营养盐季节变化直接决定支流藻类群落结构的演替及初级生产力变化过程.为分析三峡水库支流香溪河库湾主要营养盐来源对营养盐季节性变化的影响,基于2010~2011年香溪河库湾野外监测数据,选取干、支流差异显著(P0.01)的常量离子Cl-和Na+作为水团混合示踪离子,采用二元线性混合模型计算不同时期营养盐各来源的贡献率.结果表明,在枯水运行期(11月~次年2月)和汛后蓄水期(9~10月)时,长江干流对支流库湾营养盐贡献率超过75%,干流倒灌为库湾营养盐主要来源;在汛前泄水期(3~5月)和汛期(6~8月)时,干流倒灌和上游来水的贡献率差异缩小,库湾营养盐来源需考虑两者共同的影响,但干流倒灌仍占据优势.上游来水磷营养浓度相对较高,而长江干流氮、硅营养盐浓度较高,不同时期香溪河库湾分层异重流模式不同,库湾营养盐各来源的贡献率也随之改变,因此库湾营养盐在水库不同运行时期呈现出规律性变化.