基于功能仿真的电子产品性能退化分析方法

目的研究基于功能仿真对电子产品长期工作过程中性能退化问题进行分析的方法。方法以DC-DC电源模块为对象,一种方式是直接对电源模块进行加速退化试验,并基于试验数据进行可靠性分析;另一种方式是对电源模块中性能退化关键元器件进行加速退化试验,并将试验数据模型注入到电源模块功能仿真模型中,进行性能退化仿真与可靠性分析,最终对两种分析结果进行对比,验证仿真分析技术的有效性。结果对比显示,加速退化试验分析得到的电源模块平均寿命为281 560 h,仿真分析得到的电源模块平均寿命为357 290 h。结论由于仿真分析方法只考虑了性能退化的关键元器件,结果偏乐观,但是偏差在合理的范围内,证明该方法对于性能退化可靠性分析是有效的,并且应用该方法更便于进行设计改进和迭代分析。     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。     

Environmental implications of planned obsolescence and product lifetime: a literature review

The aim of this paper was to explore the implications of planned obsolescence (PO) and the associated product lifetime on the environmental impact of products. To achieve this task, a literature review was performed to assess both the historical context and recent situation of planned obsolescence. A search in scholarly journals was performed to evaluate to what extent product lifetime and PO have been discussed in the recent literature. Based on the findings, selected cases of PO are discussed and trends in the practice of limiting product lifetime are identified. Factors considered to have a significant influence on product lifetime have been identified and discussed. The discussion of case studies made it possible to establish the links between product design, manufacturing and associated impacts of lifetime. The role of the actors along the value chain is also considered to propose a business scheme, where the influences of consumer behaviour and design choices are crucial. Finally, strategies to facilitate the definition of different scenarios are given. These strategies may serve to increase the reliability of environmental assessment throughout a product life cycle.     

峨眉山景区旅游商品的开发与营销模式

通过对旅游商品定义的综述,界定了旅游商品的定义、范围和功能,同时对峨眉山景区旅游商品的开发、需求、购买力等抽取420份问卷作为样本,分析了峨眉山旅游商品的需求现状,并以旅游者需求现状为依据,对峨眉山旅游商品的开发和营销提出了“4P＋4C＋4R”营销策略,以期对其它景区的旅游商品开发和营销具有一定的借鉴意义。     

瑞平塘河氟化物污染状况调查及溯源研究

以2016—2020年地表水常规监测结果为依据,发现瑞平塘河自2017年起出现氟化物质量浓度升高现象,2020年其中1个断面氟化物质量浓度平均值达到1.25 mg/L,比2016年高出145%。为此于2021年3—6月,对瑞平塘河流域的氟化物污染状况进行实地调查并开展溯源研究。研究结果显示,2021年氟化物质量浓度超过1.0 mg/L的点位占59.34%,其中超过1.5 mg/L的点位占42.86%,表明大部分河道氟化物质量浓度已经超过水体功能区要求,对生态环境安全构成较大潜在风险。溯源调查结果表明,排除了农业源及矿山源污染的可能,乳胶制品企业排放的废水为瑞平塘河氟化物的污染来源。针对目前该行业的排放标准和环境影响评价均未提及氟化物污染,企业废水处理设施也无除氟工艺单元,缺乏有效的污染防治措施与监管要求等问题。提出,应及时组织开展该区域乳胶制品行业整治提升,增加氟化物处理工艺单元,提升出水水质,确定氟化物排放浓度限值,并对该行业排放标准做进一步研究和完善等建议。     

Toluene removal characteristics by a superimposed wire-plate dielectric barrier discharge plasma reactor

A superimposed wire-plate dielectric barrier discharge reactor was used to remove toluene in this study. The effects of oxygen content, gas flow rate, gas initial concentration and with/without catalyst on toluene decomposition were investigated. It was found that an optimal toluene removal was achieved when the oxygen content was about 5%. Under this condition, the highest toluene removal efficiency of 80.8% was achieved when the gas concentration was 80 mg/m^3. The toluene removal efficiency decreased with the increase of the gas flow rate and the initial concentration of toluene. In addition, the ozone concentration decreased with the increase of the initial concentration of toluene. It suggested that combining DBD （dielectric barrier discharge） with Co3O4/Al2O3/foam nickel catalyst in-situ could improve the toluene removal efficiency and suppress ozone formation. Products analysis showed that the main products were CO and CO2 when oxygen was more than 5%.     

印染废水中铬的活性炭吸附及资源化研究

在实验室条件下利用活性碳柱对印染废水进行了铬的吸附,对活性碳柱进行逐级加热、逆流漂洗再生,达到了较好的处理效果,同时还回收了铬盐。     

乡村旅游产品提质升级策略探析

近年来,我国乡村旅游市场发展迅猛,涌现出大批乡村旅游接待点。但由于专业经营管理和市场理念不成熟,我国乡村旅游市场在产品品质、服务质量、经营管理等方面存在诸多问题,需要从乡村旅游产品系统出发,以文化提升、整合提升、体验提升和服务提升策略进行乡村旅游产品提质升级,保障乡村旅游市场的健康发展。     

养生小镇旅游产品开发研究——以昆明市永定镇为例

养生旅游作为一种旅游新业态,是旅游业发展到一定阶段的一种新型旅游模式。昆明市永定镇具有优越的环境条件、资源条件和市场条件,适合打造成为发展养生旅游的养生小镇。永定镇养生旅游产品开发主要以"医疗昆明市养生"和"休闲养生"为核心产品,其产品价值表现为构筑核心竞争力;以"运动养生"、"农事养生"和"佛教养生"为重点产品,其产品价值表现为丰富养生旅游产品;以观光农业、康体运动和健康科普为配套产品,其产品价值表现为搭建养生旅游的基础平台。     

Facilitating substance phase‐out through material information systems and improving environmental impacts in the recycling stage of a product

The amount of electrical and electronic products is increasing rapidly, and this inevitably leads to the generation of large quantities of waste from these goods. Some of the generated e‐waste ends up in regions with sub‐standard recycling systems and may be processed under poor conditions. During uncontrolled incineration, halogenated dioxins and furans can be generated from brominated and chlorinated compounds in the products. In order to reduce the health and environmental risks involved in the recycling stage of the life cycle of electronics, an effective design‐for‐environment process must be established during the product development phase. Knowledge of the chemical substances in the product is crucial to being able to make informed decisions. Through full knowledge of the material content of procured components, phase‐outs of unwanted substances, such as halogenated substances, can be performed in an effective manner. Therefore, information is the key to success in phasing‐out substances; facilitating compliance of legal provisions for manufacturers of electrical and electronic devices; and improving the environmental footprint of products as they reach the end of the life cycle. After an introduction to the challenges of electronics waste management, this paper describes supply chain information systems and how they are used to facilitate substance phase‐outs in the electronics industry. Sony Ericsson has been working with phase‐outs of unwanted substances since it was founded in 2001. Through the introduction of a material declaration system that keeps track of all substances in the components used in the company's products, Sony Ericsson has been able to replace unwanted substances to improve environmental impacts at the recycling stage of a product.