分级燃烧工况下高岭土对煤中微量元素排放的影响研究

通过在一维煤粉燃烧炉上进行肥煤、无烟煤添加高岭土吸附剂的燃烧实验 ,研究了肥煤、无烟煤及其燃烧产物中 18种微量元素的含量和分布 ;计算了高岭土在分级燃烧工况条件下对每种微量元素的吸附率 .结果表明 :高岭土对中、低挥发性微量元素具有不同的吸附作用 ,吸附效率与煤种、元素种类、燃烧温度等因素有关 ,无烟煤燃烧比肥煤燃烧吸附效果更好 .     

木质素过氧化物酶降解四环素机理的研究

为探究过氧化物酶对四环素类抗生素的降解机理,以白腐真菌Phanerochaete chrysosporium表达的木质素过氧化物酶(LiP)粗酶为研究对象,研究其产酶条件及其降解四环素(TC)的机理。结果表明:低浓度Mn2+可促进产酶,碳源、氮源限制是产酶的重要条件;降解反应进行10min后,H2O2消耗至阈值0.045mmol/L,LiP对TC的降解停止,其降解率达到82%;TC降解反应趋于平衡时,补加TC和H2O2后,LiP依然可以高效发挥作用,其二次降解率达到65%;LiP作用于不同初始浓度(10mg/L、25mg/L、50mg/L、100mg/L)TC,显示LiP对不同浓度TC均可有效降解,TC降解率分别为62%、80%、82%和90%;降解产物的抑菌性试验反映出降解产物较TC母体的抑菌性明显降低;LC/MS捕获到6种可能的降解产物E-TC、TP 461、E-TP 461、TP 477、TP 475和TP 445,并推测出LiP降解TC可能的降解途径。     

嗜热厌氧乙醇菌在纤维素酒精生产中的作用

以热纤维梭菌 (Clostridium thermocellum LQRI)和嗜热厌氧乙醇菌(Thermoanaerobacter ethanolicus X514和Thermoanaerobacter pseudoethanolicus 39E)为对象,以不同浓度纤维素Avicel为底物,研究嗜热厌氧乙醇菌加入LQR...     

废物水泥窑共处置产品中重金属释放量研究

通过模拟煅烧实验制取水泥熟料,并采用国标GB/T 17671-1999制取混凝土样品.选用EA NEN7371和EA NEN7375浸出方法,利用基于菲克扩散第二定律的一维扩散模型对废物水泥窑共处置产品（混凝土）中重金属长期累积释放量进行了研究.结果表明,混凝土中重金属的最大释放量低于总量;各种重金属在混凝土中的扩散系数不同,且Cr>As>Ni>Cd; Cr、As、Ni和Cd 30a的累积释放量分别为4.43、 0.46、 1.50和0.02 mg/kg,释放率（累积释放量/最大释放量）分别为27.0%、 18.0%、 3.0%和0.2%;扩散系数是影响重金属累积释放量的重要因素,且两者表现出较好的相关性;Cr和As的扩散系数较大（分别为1.15E-15 m²/s和6.42E-16 m²/s）,应重点控制其进入水泥窑处置过程的总量.     

用于组织和产品碳足迹的中国电力温室气体排放因子

讨论了组织和产品碳足迹与清洁发展机制(CDM)在计算电力温室气体排放因子方法上的区别,在发改委电力排放因子的基础上进行了多项修正与补充,分别得到用于组织和产品碳足迹的中国电力温室气体排放因子.结果表明,发改委发布的电力基准线排放因子与本文得出的组织和产品碳足迹的排放因子有显著差距,不应混用.本文计算的排放因子可为国内组织及产品碳足迹研究提供更恰当的数据来源.     

香蕉组培苗的营养和施肥

较系统地研究了香蕉组培苗的营养与施肥，试验方案包括了ＮＰＫ１３种用量水平、１０种不同ＮＰＫ配比和中微量元素混施．试验结果表明，在一定的ＮＰＫ施肥基础上．再增施ＮＰＫ均能获得不同程度的增产，其中增施Ｎ的增产幅为４．７％－１５．０％，增施Ｐ、Ｋ的分别为３．４％－１５．１％和６．６％－１２．６％．增Ｎ有利于植株增高、茎围增粗、长叶增快和提早吐蕾；增Ｐ对植株增高和提早吐蕾也有一定的作用；增Ｋ主要有利于茎围增粗，但在高Ｎ高Ｐ下增Ｋ也同样具有增Ｎ的多种效果．增Ｋ的另一效应是延缓吐蕾期而使吐蕾期较集中一致，这有利于田间管理和收获；施用中微量元素的增产效果显著，同时也改善和提高了果实品质．应提倡应用和推广．     

离子色谱法测废印刷电路板真空热解气相污染物中HBr、NO2和SO2

在淋洗液中加入H2O2和三乙醇胺配制成吸收液,通过离子色谱法同时测定废印刷电路板真空热解气相产物中HBr、NO_2和SO_2的含量,方法简单、快速、准确。当用50 m L吸收液、采样体积为30 L时,3种污染物的检出限分别为0.000 005 7、0.000 003 4、0.000 002 9 mg/L。该方法加标回收率为95.7%~104.8%,完全能满足废印刷电路板真空热解气相污染物中HBr、NO_2和SO_2的同时测定要求。利用该方法和行标方法同时测定环境空气中的HBr、NO_2和SO_2,再利用Excel分析工具对测定数据进行F检验和t检验,检验结果表明2种测定方法无显著差异。     

Development of inherent safety and health index for formulated product design

The numerous formulated products which are introduced to the market consist of chemical ingredients that may cause various safety and health hazards to the consumers. Therefore, it is extremely important to practice a systematic methodology to formulate products with acceptable safety and health performances. This work presents an index-based methodology to assess the safety and health hazards of the ingredients during the early formulation stage of product design. Hence, new inherent safety and health sub-indexes are introduced to improve the current safety and health hazards that are needed in formulated product design. The inherent safety and health sub-indexes are assigned with scores based on the degree of potential hazards. A higher score indicates a higher safety risk or severe health effect, and vice versa. The proposed methodology will greatly assist the users to identify the adverse safety and health effects caused by the ingredients. Hence, it is pivotal to eliminate or reduce the safety and health impacts from product usage. A case study on common ingredients used in the formulation of paint is presented on this study to describe the proposed method.     

Chromatographic fingerprinting as a means to predict degradation mechanisms

The degradation products of polymers are identifiable by chromatography. The degradation product patterns (or fingerprints) formed depend on the type of polymer, the degradation mechanism(s), and also the type of additive present in the material. The chromatographic fingerprint of biotically aged degradable low-density polyethylene (i.e., LDPE+starch+prooxidant) shows, in particular, the absence of low molecular weight carboxylic acids, which suggests an assimilation of these carboxylic acids by the microorganisms. The degradation products of natural polymers are usually intermediates that are used again in the anabolic cycles. It is possible to transfer the terminology from the natural polymers, where the catabolism of natural polymers consists of three stages, and apply this also to the degradable synthetic polymers. During stage I the natural polymers degrade to their major building blocks (e.g., amino acids, glycerol, hexoses, pentoses, etc.), during stage II these products are collected and converted to a smaller number of even simpler molecules [e.g., acetyl-coenzyme A (CoA)]. In stage III, finally, the acetyl-CoA enters the citric acid cycle, where energy is gained in parallel with the release of CO₂ and H₂O.Presented at the international workshop,Polymers from Renewable Resources and their Degradation, Stockholm, Sweden, November 10–11, 1994.     

再制造工程——末端产品最佳资源化方式

再制造工程是一种末端产品的资源化利用方式。阐述了再制造工程的内涵、在全生命周期中的地位及国内外发展现状，分析了再制造所能够带来的巨大的资源效益、经济效益、社会效益和环境效益，得出结论：再制造工程是末端产品进行资源化处理的最佳利用方式。