Prediction of Leachate Level in Kimpo Metropolitan Landfill Site by Total Water Balance

Kimpo metropolitan landfill has received various kinds of wastessince January 1992. The leachate level was measured to be 10.3 m in May 1995 and the level increased to 12.2 m in August 1996. Therefore, to prove the reason for the increasing leachate level, we calibrated hydraulic conductivity of each waste andintermediate layer using the HELP (Hydrologic Evaluation ofLandfill Performance) model. The leachate generation data measured from February 1993 to October 1995 was used in the model calibration. As a result of a model calibration, we obtained anaverage infiltration ratio and used this in analysis of the total water balance to predict elevation of leachate level. Main causes of the elevation of the leachate level were the high water content of the waste and the degradation of the leachate-drainage system caused by the subsidence of a naturalbarrier layer.     

CODMn重新稀释取样体积的推定

对原CODMn法测地表水二次取样体积进行了推导，建立了实际适用取样体积公式，具有一定的适用性。     

乙酸型顶极群落的内平衡与反馈调节机制研究

通过产酸脱硫反应器处理高浓度硫酸盐有机废水的连续流试验，从“动态”角度考察COD／SO4^2-比改变引起的pH值、氧化还原电位（ORP）、碱度（ALK）和末端产物（VFAs）等的变动及生态因子的叠加效应引发的优势种群变迁，分析了乙酸型顶极群落的稳定性及其发生定向性生态演替的规律，进而阐明了乙酸型顶极群落抵抗环境压力的内平衡与反馈调节机制，并指出乙酸型代谢和乙酸型顶极群落是产酸脱硫生态系统的典型特征。     

催化快速法测定COD_(Cr)定量下限的研究

催化快速法测定CODCr是我国目前环境监测中普遍使用的最快速、简便、可靠的方法 ,该法的检测范围是 60～ 1 0 0 0mg/l,我们经过研究测出催化快速法的定量下限为 1 0mg/l,扩大了该法的应用范围。     

骆马湖的氮磷平衡及实施截污工程对水质改善效果的研究

骆马湖“九五”期间的氮磷平衡分析结果表明：氮磷在骆马湖湖体中的滞留量分别为1188.89t/a和193.36t/a。根据骆马湖的水质要求，在骆马湖截污工程完成后，没有新的污染进入水体的前提下，对骆马湖水体通过自然净化恢复到要求状态所需的时间进行了详细的数学推导和科学论证，结果表明，在不考虑底泥营养物质的情况下，只需0.19年左右的时间就能恢复，如果考虑底泥的影响。也只需0.59年左右的时间就能恢复，因此得出结论：对骆马湖实施截污是加速骆马湖水体改善的最佳途径。     

鞍钢外排废水COD的测定及统计分析

运用等污染负荷法，对鞍钢外排废水COD进行了统计分析，确定主要污染，并对如何治理提出了建议。     

生物质气化洗焦废水的预处理和微生物降解

为了对生物质气化洗焦废水进行深度处理,达到废水排放标准,采用物理过滤和微生物降解相结合的方法,对洗焦废水的原液进行处理。实验结果表明,用木屑、颗粒活性碳、微生物降解的连续步骤处理生物质气化洗焦废水,可达到理想的生物质气化洗焦废水COD的去除效果。     

市场经济体制下的企业环境行为及调控

市场经济体制和现代企业制度也逐步建立，企业将表现出三类不同的环境行为，为矫正，引导企业的环境行为，必须建立有效的经济调控手段和强有力的法制保障手段。     

絮凝法处理纸浆漂白废水的研究

研究了无机絮凝剂ＰＡＣ，ＰＳＡ，ＰＥＳ，ＭｇＣｌ２，ＣａＯ及其与有机高分子絮凝剂ＣＧＡ复全使用对两种不同工艺漂白废水的混凝处理特性，结果表明，水质１ＣＯＤｃｒ，ＡＯＸ去除率分别为６３．２％，４５．３％，水质２ＣＯＤｃｒ，ＡＯＸ去除率达７３．１￥％，５３．４％。化钙与碳酸钠具有相同的降解ＡＯＸ能力，硫离子在中性ｐＨ条件下可显著提高ＡＯＸ的去除率。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.