九龙江的碳酸盐体系、CO2分压及其调控

于2011年枯水期和丰水期调查了九龙江的溶解氧、pH、溶解无机碳(DIC)和总碱度(TAlk),并计算水体CO2分压(pCO2)。九龙江溶解氧饱和度平均为67±18%(枯水期)和57±12%(丰水期),最低只有10%(枯水期)和35%(丰水期);pH为7.08±0.12(枯水期)和7.22±0.11(丰水期),最低只有6.88(枯水期)和6.98(丰水期);DIC为1027±620μmol/kg(枯水期)和820±340μmol/kg(丰水期);TAlk在枯水期为885±570μmol/kg,比相应DIC低140±70μmol/kg。水体TAlk受控于流域地质背景和化学风化的影响,而DIC既包含流域风化过程的产物HCO3-,也包含水柱呼吸过程和沉积物中其他生物地球化学过程释放的游离CO2。九龙江pCO2高达3470±1640μatm(枯水期)和3590±1410μatm(丰水期),超过大气平衡水平8.9~9.2倍。过饱和CO2与表观耗氧量的耦合分析表明,水柱呼吸作用只能说明九龙江高pCO2的66%~94%。     

Adsorption of Ca2+ on single layer graphene oxide

Graphene oxide(GO) holds great promise for a broad array of applications in many fields,but also poses serious potential risks to human health and the environment.In this study,the adsorptive properties of GO toward Ca~(2+) and Na+were investigated using batch adsorption experiments,zeta potential measurements,and spectroscopic analysis.When pH increased from 4 to 9,Ca~(2+)adsorption by GO and the zeta potential of GO increased significantly.Raman spectra suggest that Ca~(2+)was strongly adsorbed on the GO via –COO Ca~+ formation.On the other hand,Na+was adsorbed into the electrical diffuse layer as an inert counterion to increase the diffuse layer zeta potential.While the GO suspension became unstable with increasing pH from 4 to 10 in the presence of Ca~(2+),it was more stable at higher pH in the NaC l solution.The findings of this research provide insights in the adsorption of Ca~(2+)on GO and fundamental basis for prediction of its effect on the colloidal stability of GO in the environment.     

碳酸钙与生物炭对酸化菜地土壤持氮能力的影响

针对太湖地区稻田改种菜地后带来的土壤酸化现象,以碳酸钙与生物炭作为酸化改良剂,开展室内培养及多次淋洗模拟试验,比较两种改良剂对酸化菜地土壤持氮能力及酸化修复效果的影响.结果表明,基于碱缓冲曲线法,本试验用酸化菜地土壤每提高1个p H单位需向土壤中添加碳酸钙3.92×10-2mol·kg~(-1)或生物炭27.73 g·kg~(-1).无外源氮条件下碳酸钙添加使土壤氮矿化速率显著提高了37%,对土壤铵态氮、硝态氮含量影响不显著;生物炭添加使土壤氮矿化速率显著提高了35%~44%,且显著增加了土壤硝态氮含量42%~58%.模拟淋洗下,生物炭添加显著消减渗漏液体积24%,渗漏液氮浓度45%,显著减少氮淋失量42%~57%,而碳酸钙添加对渗漏液体积没有影响,增加了渗漏液中氮浓度,氮淋失量增加了12%~76%.淋洗后,各处理土壤p H值发生不同程度的降低,无外源氮条件下添加碳酸钙处理土壤p H值降幅最低,外源氮添加条件下生物炭添加处理降幅最低.由此可见,碳酸钙对酸化土壤修复效率较高,但在外源氮添加条件下降低了土壤持氮能力,更适用于酸化严重且需要休耕改良的菜地土壤;生物炭在维持土壤p H值的同时可以有效提高土壤矿质氮留存量,降低氮淋失,更适用于仍在高强度种植的菜地土壤.     

毛乌素沙地土地利用/覆被变化对草地土壤物理、化学和矿物学性质的影响

In arid and semiarid regions, cultivation and shrub invasion are two important factors to impact grassland. However, there are few studies to compare the effects of cultivation and shrub invasion on soil physical, chemical and mineralogical properties. In this study, three sampling sites, which respectively represent the native grassland, cultivated grassland (farmland), and shrub invasion of grassland (shrub land) in Mu Us sand land, were selected and soil samples were collected and measured for soil particle size distribution (PSD), soil organic carbon (SOC), total nitrogen (TN) and total phosphorous (TP) concentrations, and relative percentages of mineralogical components. Results showed that cultivation and shrub invasion significantly altered the soil PSD, soil C, N and P concentrations and pools, and the relative percentages of soil mineralogical components of the grassland ecosystems. Grassland cultivation and shrub invasion significantly decreased the contents of silt and clay. Moreover, the land cover change from grassland to farmland or shrubland significantly resulted in soil organic carbon, total nitrogen and soil carbonate loss. In this study, we found that grassland cultivation resulted in more sand accumulation and more soil C and N losses than shrub invasion, which indicated that grassland cultivation was stronger than shrub invasion to accelerate soil desertification in Mu Us sand land.     

有色冶炼重金属废水回用研究

通过对株洲冶炼厂重金属废水回用结垢问题的研究，针对其垢样主要属碳酸钙垢型的特点，提出以投加高效低剂量的阻垢剂作为防止结垢的主要方法，运行证明，该防止结垢方法具有明显的经济效益和环境效益，应用前景广阔。     

Characterization of a limestone in a batch fluidized bed reactor for sulfur retention under oxy-fuel operating conditions

CO₂ and SO₂ are some of the main polluting gases emitted into atmosphere in combustion processes using fossil fuel for energy production. The former is one of the major contributors to build-up the greenhouse effect implicated in global climate change and the latter produces acid rain. Oxy-fuel combustion is a technology, which consists in burning the fuel with a mix of pure O₂ and recirculated CO₂. With this technology the CO₂ concentration in the flue gas may be enriched up to 95%, becoming possible an easy CO₂ recovery. In addition, oxy-fuel combustion in fluidized beds allows in situ desulfurization of combustion gases by supplying calcium based sorbent.In this work, the effect of the principal operation variables affecting the sulfation reaction rate in fluidized bed reactors (temperature, CO₂ partial pressure, SO₂ concentration and particle size) under typical oxy-fuel combustion conditions have been analyzed in a batch fluidized bed reactor using a limestone as sorbent. It has been observed that sulfur retention can be carried out by direct sulfation of the CaCO₃ or by sulfation of the CaO (indirect sulfation) formed by CaCO₃ calcination. Direct sulfation and indirect sulfation operating conditions depended on the temperature and CO₂ partial pressure. The rate of direct sulfation rose with temperature and the rate of indirect sulfation for long reaction times decreased with temperature. An increase in the CO₂ partial pressure had a negative influence on the sulfation conversion reached by the limestone due to a higher temperature was needed to work in conditions of indirect sulfation. Thus, it is expected that the optimum temperature for sulfur retention in oxy-fuel combustion in fluidized bed reactors be about 925–950 °C. Sulfation reaction rate rose with decreasing sorbent particle size and increasing SO₂ concentration.     

Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates

Polyvinyl chloride (PVC) was milled with hydrated or unhydrated calcium sulfates (CaSO₄·2H₂O or CaSO₄) in air by using a planetary mill to investigate mechanochemical dechlorination behavior. The milling process resulted in size reduction and in the breaking of bonds leading to mechanically induced solid state reaction, forming CaCl₂ and dechlorinated hydrocarbon with C=C double bonds in the product. Washing the milled mixtures with water at room temperature allowed removal of the chloride formed during milling, and more than 95% of the chlorine in PVC was removed from a mixture milled for 4 h. This process could offer a potential route for the handling and disposal of both PVC and gypsum wastes. H₂S gas was generated during milling; more H₂S was released from the unhydrated sample than from the hydrated sample.     

水井酸处理中排污水水质变化规律

盐酸洗井是增大碳酸盐岩井涌水量的一种有效措施。大量盐酸的广泛应用,严重影响地下水质,必须充分考虑到它带来的环境污染问题。本文对水井经酸处理后排放的污水水质作了监测,进而对水质的变化规律作了研究。     

VASC-SCL工艺在焦炉煤气脱硫中的应用

介绍了真空碳酸钠-克劳斯工艺在焦化厂焦炉煤气脱硫及硫回收中的应用,主要介绍了工艺流程、主要设备和监测结果,并对此工艺进行了简要评价。     

Fast and Living Ring-Opening Polymerization of l-Lactide Initiated with In-situ–Generated Calcium Alkoxides

The ring-opening polymerization of l-lactide with calcium alkoxides generated in-situ from bis(tetrahydrofuran)calcium bis[bis(trimethylsilyl)amide] and 2-propanol are presented. The polymerization in THF at room temperature proceeds rapidly and in a living manner, giving poly(l-lactide)s of controlled molecular weight, low polydispersity, and tailored end-functionalities. Kinetic studies show the absence of an induction period and a pseudo-first order rate constant of 6.41 L mol^–1 min^–1, which is significantly higher than for related Y₅(-O)(O ⁱ Pr)_13– or aluminum alkoxide-initiated polymerizations. The initiation involves a two-step process: (1) alcoholysis of bis(tetrahydrofuran)calcium bis[bis(trimethylsilyl)amide] to give the corresponding calcium alkoxide and (2) ring-opening of l-lactide via acyl-oxygen cleavage and insertion into the calcium-alkoxide bond. In the presence of excess alcohol, fast and reversible exchange between free alcohol molecules and coordinated alkoxide ligands takes place. This allows tuning of the poly(l-lactide) molecular weight over a wide range.