大气中还原态硫化合物的测定

建立了一套简便易行的还原态硫化合物的采集及分析方法，该方法可分离和检测11种还原态硫化合物。利用该方法测定了北京市和青藏高原地区还原态硫化合物的混合比，结果表明，北京市和青藏高原地区存在较强的COS和CS2人为和自然排放源。     

Assessing microbial degradation of o-xylene at field-scale from the reduction in mass flow rate combined with compound-specific isotope analyses

In recent years, natural attenuation (NA) has evolved into a possible remediation alternative, especially in the case of BTEX spills. In order to be approved by the regulators, biodegradation needs to be demonstrated which requires efficient site investigation and monitoring tools. Three methods--the Integral Groundwater Investigation method, the compound-specific isotope analysis (CSIA) and a newly developed combination of both--were used in this work to quantify at field scale the biodegradation of o-xylene at a former gasworks site which is heavily contaminated with BTEX and PAHs. First, the Integral Groundwater Investigation method [Schwarz, R., Ptak, T., Holder, T., Teutsch, G., 1998. Groundwater risk assessment at contaminated sites: a new investigation approach. In: Herbert, M. and Kovar, K. (Editors), GQ'98 Groundwater Quality: Remediation and Protection. IAHS Publication 250, pp. 68-71; COH 4 (2000) 170] was applied, which allows the determination of mass flow rates of o-xylene by integral pumping tests. Concentration time series obtained during pumping at two wells were used to calculate inversely contaminant mass flow rates at the two control planes that are defined by the diameter of the maximum isochrone. A reactive transport model was used within a Monte Carlo approach to identify biodegradation as the dominant process for reduction in the contaminant mass flow rate between the two consecutive control planes. Secondly, compound-specific carbon isotope analyses of o-xylene were performed on the basis of point-scale samples from the same two wells. The Rayleigh equation was used to quantify the degree of biodegradation that occurred between the wells. Thirdly, a combination of the Integral Groundwater Investigation method and the compound-specific isotope analysis was developed and applied. It comprises isotope measurements during the integral pumping tests and the evaluation of delta13C time series by an inversion algorithm to obtain spatially integrated mean isotope values at the control planes. It was shown that the Rayleigh equation is applicable to spatially integrated mean isotope values in order to obtain the mean biodegradation between the consecutive control planes. All three approaches yielded consistently a 98-99% degradation of o-xylene.     

The diffusion and sorption of volatile organic compounds through kaolinitic clayey soils

Laboratory experiments to estimate the effective molecular diffusion coefficient (D(e)) and sorption coefficient (K(d)) for volatile organic compounds through natural clayey soils were conducted using diffusion testing apparatus. The compounds tested were methyl ethyl ketone (MEK), toluene and trichloroethylene (TCE). The D(e) and K(d) values were determined by a curve fitting procedure. The compound losses, and the effects of porous disks used in the apparatus were significant. The transport of MEK was faster than that of TCE and toluene because of the lower sorption to the soils. The D(e) values of all the compounds were of the order of 10(-10) m(2)/s and smaller than the diffusion coefficient in pure aqueous solution at infinite dilution (D(0)), due to the tortuosity of the samples. The effects of the sample thickness on the parameter determination were not significant. Comparison to the K(d) values estimated from batch sorption tests and from organic carbon content (f(oc))-based predictions showed that the diffusion test results were intermediate between those from the other two methods. The diffusion tests use compacted soil samples and should be more relevant to in situ conditions, but the reliability of the tests is affected by large compound losses that cause uncertainties in their interpretation. It is recommended that more than one method be used to assess K(d) values.     

气相色谱法分离和测定合成革用胶粘剂中的挥发性有机物

对合成革用胶粘剂中的发挥有机成份进行了色谱分离，并测定了胶粘剂中的9种挥发性有机物，方法的加标回收率为89.4%～102.8%，变异系数为1.2%～5.0%。     

氯代芳香化合物的微生物降解研究

生物技术对消除有毒化学品已显示出广阔的应用前景，深入研究有毒化学品微生物降解的生物化学和遗传学，可按照预期目的构建具有更大降解能力的遗传工程菌株，以促使污染物的无害化资源化。本文对纯菌株降解氯代芳香化合物的降解途径、降解性质粒和遗传工程菌株的构建等诸方面进行了综述。     

Dendroremediation of trinitrotoluene (TNT) Part 2: Fate of radio-labelled TNT in trees

BACKGROUND, AIM AND SCOPE: Problems of long-term existence of the environmental contaminant 2,4,6-trinitrotoluene (TNT) and necessities for the use of trees ('dendroremediation') in sustainable phytoremediation strategies for TNT are described in the first part of this paper. Aims of the second part are estimation of [14C]-TNT uptake, localisation of TNT-derived radioactivity in mature tree tissues, and the determination of the degree of TNT-degradation during dendroremediation processes. METHODS: Four-year-old trees of hybrid willow (Salix spec., clone EW-20) and of Norway spruce (Picea abies) were cultivated in sand or ammunition plant soil (AP-soil) in wick supplied growth vessels. Trees were exposed to a single pulse application with water solved [U-14C]-TNT reaching a calculated initial concentration of 5.2 mg TNT per kg dry soil. Two months after application overall radioactivity and extractability of 14C were determined in sand/soil, roots, stem-wood, stem-bark, branches, leaves, needles, and Picea May sprouts. Root extracts were analysed by radio TLC. RESULTS: 60 days after [14C]-TNT application, recovered 14C is accumulated in roots (70% for sand variants, 34% for AP-soil variant). 15-28% of 14C remained in sand and 61% in AP-soil. 3.3 to 14.4% of 14C were located in aboveground tree portions. Above-ground distribution of 14C differed considerably between the angiosperm Salix and the gymnosperm Picea. In Salix, nearly half of above-ground-14C was detected in bark-free wood, whereas in Picea older needles contained most of the above-ground-14C (54-69%). TNT was readily transformed in tree tissue. Approximately 80% of 14C was non-extractably bound in roots, stems, wood, and leaves or needles. Only quantitatively less important stem-bark of Salix and Picea and May shoots of Picea showed higher extraction yields (up to 56%). DISCUSSION: Pulse application of [14C]-TNT provided evidence for the first time that after TNT-exposure, in tree root extracts, no TNT and none of the known metabolites, mono-amino-dinitrotoluenes (ADNT), diaminonitrotoluenes (DANT), trinitrobenzene (TNB) and no dinitrotoluenes (DNTs) were present. Extractable portions of 14C were small and contained at least three unknown metabolites (or groups) for Salix. In Picea, four extractable metabolites (or groups) were detected, where only one metabolite (or group) seemed to be identical for Salix and Picea. All unknown extractables were of a very polar nature. CONCLUSIONS: Results of complete TNT-transformation in trees explain some of our previous findings with 'cold analytics', where no TNT and no ADNT-metabolites could be found in tissues of TNT-exposed Salix and Populus clones. It is concluded that 'cold' tissue analysis of tree organs is not suited for quantitative success control of phytoremediation in situ. RECOMMENDATIONS AND OUTLOOK: Both short rotation Salicaceae trees and conifer forests possess a dendroremediation potential for TNT polluted soils. The degradation capacity and the large biomass of adult forest trees with their woody compartments of roots and stems may be utilized for detoxification of soil xenobiotics.     

炼焦废水生化处理技术研究进展

综述了近几年来炼焦废水及炼焦废水中主要成分(酚类、氨类物质、氰化物)的生化处理方法.其中废水中酚类物质的去除方法有投加有效菌、超滤法等;去除氨类物质的方法有A2/O法、纳滤法和反渗透法等;去除氰化物的方法有生物法和化学法等.综合处理炼焦废水的方法有双层生物膜法、生物脱氮法和含铁活性污泥处理技术等.     

Ferrioxalate-mediated photodegradation and mineralization of 4-Chlorophenol

INTENTION, GOAL, SCOPE, BACKGROUND: Advanced oxidation processes are powerful methods which are capable of transforming refractory, nonbiodegradable and/or toxic organic compounds into harmless end products such as carbon dioxide and water. However, one commen problem of all advanced oxidation processes is the high demand of electrical energy for ultraviolet lamps, which causes high operational costs. Minimization of the required irradiation time, and therefore the energy consumption, by optimization of other reaction conditions such as catalyst-oxidant type and concentration, pH, temperature, pollutant/oxidant ratio etc., therefore continues to gain importance. OBJECTIVE: The main objective of this study was the minimization of the required irradiation time through optimization of the use of a newly patented catalyst, ferrioxalate, and also to compare the performance of this catalyst with the performance of other AOPs. METHODS: Oxidation of 4-chlorophenol by photo-Fenton process using potassium ferrioxalate as a mediator was studied in a lab scale photoreactor. The influence of parameters such as hydrogen peroxide and ferrioxalate concentrations, initial pH, power-output, oxalate/iron ratio and different iron sources was evaluated. An upflow photoreactor equipped with a 1000 Watt high-pressure mercury vapour lamp and operating in a recirculation mode was used during photodegradation experiments. The extent of the reduction of 4-chlorophenol, Total Organic Carbon and Chemical Oxygen Demand was used to evaluate the photodegradation reaction. RESULTS AND DISCUSSION: The optimum pH range observed was found to be 2.7-3. The efficiency of 4-chlorophenol oxidation increased with increasing concentrations of hydrogen peroxide and ferrioxalate, reaching a plateau after the addition of 10 and 0.072 mM of those reagents, respectively. Using an Oxalate/iron ratio of 12 was 18% less efficient than using a ratio of 3:1. The efficiency increased with increasing radiation power. However, this increase was not linear. The UV/ferrioxalate/H2O2 process, by which complete mineralization of 100 mg l(-1) 4-chlorophenol was achieved in 20 min of total reaction time, was the most efficient process among the alternatives applied. CONCLUSIONS: The use of ferrioxalate as the catalyst was found to be more efficient than the use of Fe(II) and Fe(III) iron species. It was possible to completely mineralize 4-chlorophenol. RECOMMENDATION AND OUTLOOK: The results of this study demonstrate that the ferrioxalate-mediated degradation of 4-chlorophenol requires less irradiation times than other advanced oxidation processes. There are mainly 19 phenol isomers and other toxic and nonbiodegradable organic compounds. We recommend that similar studies should be performed on many such compounds in order to attain a clear understanding of the performance of this catalyst. Because of its light sensitivity, this catalyst should be used immediately after its preparation. The use of low pressure mercury vapour lamps in this process should also be considered, since low power outputs may be enough for the process.     

Characterizing the source/sink behavior of double-layer building materials

A model is developed to predict the rate of mass transfer between a double-layer material and indoor air. The model allows non-uniform initial material-phase concentrations in each of the two layers and a transient influent gas-phase concentration to be considered. This model builds on a recently validated single-layer model and should prove useful in predicting the behavior of double-layer material assemblies. Many indoor furnishings and building structures are comprised of layers of different material. The approach taken here represents a first step in the development of a more generally applicable multi-layer model. An analytical solution to the double-layer model is obtained and a parametric analysis is performed illustrating the behavior of the model as a function of the primary model parameters. The paper concludes by examining the potential use of thin diffusion barriers to reduce material emission rates and a hypothetical example of emissions from an adhesive that is part of an adhesive/material assembly.     

Exposure of population and microenvironmental distributions of volatile organic compound concentrations in the EXPOLIS study

Determination of volatile organic compounds (VOCs) formed one part of the EU-EXPOLIS project in which the exposure of European urban populations to particles and gaseous pollutants was studied. The EXPOLIS study concentrated on 30 target VOCs selected on the basis of environmental and health significance and usability of the compounds as markers of pollution sources. In the project, 201 subjects in Helsinki, 50 in Athens, 50 in Basel, 50 in Milan and, 50 in Oxford and 50 in Prague were selected for the final exposure sample. The microenvironmental and personal exposure concentrations of VOCs were the lowest in Helsinki and Basel, while the highest concentrations were measured in Athens and Milan; Oxford and Prague were in between. In all cities, home indoor air was the most significant exposure agent. Workplace indoor air concentrations measured in this study were generally lower than the home indoor concentrations and home outdoor air played a minor role as an exposure agent. When estimating the measured personal exposure concentrations using the measured concentrations and time fractions spent at home indoors, at home outdoors, and at the workplace, it could be concluded that these three microenvironments do not fully explain the personal exposure. Other important sources for personal exposure must be encountered, the most important being traffic/transportation and other indoor environments not measured in this study.