浅谈湿法炼锌工艺的浸出渣问题

湿法炼锌已占据世界炼锌总量的80％以上,是世界炼锌生产的发展方向,而湿法炼锌中产出的锌浸出渣可能带来的环境污染及其防治,成为该类项目中需要关注的重要问题之一。本文对锌浸出渣的产生、处理过程中的污染环节以及可能带来的环境影响进行了分析,并根据作者的工作实践,提出了防止锌浸出渣处理过程产生污染的措施,具有一定的参考价值和指导意义。     

基于生命周期评价EI99法的水泥窑共处置废弃农药分析

以废弃农药为研究对象,应用生命周期评价法从人类健康(HH)、生态系统质量(EQ)和资源(R)3个角度对水泥窑共处置和焚烧炉处置的环境影响做出定性和定量评估.结果表明,废弃农药在水泥窑中共处置更具环境合理性.在水泥窑共处置和焚烧炉处置中,功能单位(1t)废弃农药总环境负荷(也称为环境影响潜值)分别为-27.5和0.379Pt,前者的环境负荷比后者减少了7360%,人类健康(HH)、生态系统质量(EQ)和资源(R)等各指标分别减少372%、5840%、-40.0%.废弃农药水泥窑共处置在原/燃料的获取阶段可避免57.4%的环境负荷,是降低水泥窑共处置环境影响的关键环节.焚烧和电力生产阶段的污染排放对焚烧炉处置中各指标都有很高的贡献率.二英、苯、重金属是水泥窑共处置废弃农药的主要影响因子;NOx和粉尘对焚烧系统的影响较大.     

水泥脱硝的个性化设计与工程实践

随着水泥窑脱硝技术从理论探讨走向实际应用,水泥生产企业在NOx减排方案的选择上,需综合考虑区域特点、炉型特性和长远环保要求,采用专业的调研检测、个性化方案设计和周全的工程实施,以有利企业发展和满足环保要求。     

焚烧飞灰水泥窑共处置过程As的迁移特征

为了明确焚烧飞灰水泥窑共处置过程中As的迁移特性,对大量国外工业水泥窑As的监测数据进行了统计分析,研究As或Cl输入总量对As迁移特性的影响.同时,采用CHEMKIN软件对水泥窑煅烧过程中As的物相进行热力学模拟,并使用水泥回转窑系统的简化模型讨论了窑灰循环对As迁移的影响.结果表明,焚烧飞灰中As的酸可提取态、可还...     

废皮革水泥窑共处置生命周期评价

以废皮革为典型固体废物开展水泥窑共处置试烧试验.以生命周期评价方法(LCA)为研究手段,对水泥窑共处置技术的环境影响进行评价,并与常规水泥生产过程作比较.结果表明:常规水泥生产过程的综合环境负荷为7.028×10-12 a-1,其中最大的环境负荷为全球变暖,达3.368×10-12 a-1.当废皮革作为替代燃料在水泥窑中共处置时,可减少燃煤的使用量,同时降低CO₂的排放,降低了能源消耗、人体健康损害等方面的环境压力;其综合环境负荷为6.618×10-12 a-1,比常规水泥生产降低了5.83%.      

High mercury leachate containing HgS22 − complex ion: Detoxifying solidification and high efficiency Hg extraction

Clean and efficient treatment of high-mercury leachate produced from remediation of mercury-polluted soil has become a huge challenge for environmental scientists.In this work,cement solidification was firstly adopted to treat the high-concentration mercury leachate,which had high alkalinity.Different mercury concentrations,namely 3.120 mg/L Hg mercury leachate and 9.243 mg/L Hg mercury concentrated leachate,were separately solidified by Portland cement.The results indicated that simply using the cement can properly solidify both the leachates to meet the waste landfill standard,with liquid(mL)/solid(g) ratio(L/S ratio) of4:10–6:10.In order to make full use of mercury in the leachates,a Hg extraction method was subsequently carried out under different experimental parameters,such as temperature and p H value.It was shown that the Hg extraction ratio could reach as high as 99.84% and almost all the mercury in the leachate could be transformed to HgS precipitate;moreover,the Hg concentration in the treated leachate was reduced from 3.120 to 0.005 mg/L at p H 2.98 and 30°C,which was much less than the limit of the national standard,indicating that the leachate had been completely cleaned and could be discharged freely.Hence,simple cement solidification renders high-mercury leachate nontoxic,and the Hg extraction method can successfully recover the Hg and enable the residual leachate to be discharged safely.     

Field investigation of pavement rehabilitation utilizing cold in-place recycling

Despite the widespread field and laboratory research works there are still a lot of unknown aspects about the cold in-place recycling. This paper presents the outcomes of a five year evaluation of a major highway in Iran which had been rehabilitated by cold in-place recycling. Before starting the rehabilitation process, a comprehensive field survey was performed. During the pavement surveying, type, severity and reason of distresses were investigated and PCI parameter was calculated. Furthermore, both destructive and nondestructive tests were carried out to evaluate the pavement condition and estimate the remaining life. On the basis of these investigations studied highway was divided to six design sections. Based on technical analysis four sections were recycled whereas two other sections were rehabilitated with the conventional cold milling and overlay method. Afterwards, the pavement performance was monitored during the next 5 years. After about six months of monitoring, structural failures were detected in about 10% of recycled areas. Based on field surveying, low compaction and load bearing of subgrade materials and lack of high quality unbound pavement layers accompanied by some shortcomings in recycled layer resulted in undesirable results in these areas. Based on obtained results and performed analysis a practical flowchart was presented which could be used as a project selection guideline.