Vermicomposting as an advanced biological treatment for industrial waste from the leather industry

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.     

基于地面监测数据的2013~2015年长三角地区PM2.5时空特征

近年来,长三角地区灰霾天气持续增多,空气细颗粒物污染问题日益突出。基于2013年1月至2015年5月长三角地区及周边缓冲区内共214个空气质量监测站点PM_2.5逐时监测数据,运用普通克里金插值方法,从年、季、月尺度上分析了PM_2.5的空间分布格局和时间动态变化。结果表明:(1)2 a来,长三角地区PM_2.5浓度空间分布明显呈现整体北部高南部低,局部地区略有突出的分布特征;长三角地区PM_2.5浓度年均值为57.08μg/m³;其中,江苏省PM_2.5的年均值为三省市最高,为65.84μg/m³;其次为上海市,年均值为53.87μg/m³;浙江省PM_2.5的年均值较小,为51.53μg/m³。(2)从季节尺度分析,长三角地区PM_2.5浓度变化表现出冬春季高,夏秋季低的变化趋势;这与区域内冬季风向来源、降水稀少、气象扩散条件差有着密切的关系; (3)长三角地区月浓度变化大致呈U形分布; 12月份PM_2.5浓度最高; 3月份以后, PM_2.5浓度开始呈逐步下降趋势;在5~9月份,区域PM_2.5处于"U"字的谷底,其中6月份夏收时期秸秆焚烧、气象等因素导致PM_2.5浓度有略微升高;进入10月份后迅速攀升,且11、12月份呈现持续升高态势。     

区域大气环境中PM2．5／PM10空间分布研究

提出了一种利用移动监测技术研究区域大气环境中PM2.5／PM10空间分布的方法,并在2004年12月进行了宁波市全市域PM2.5／PM10空间分布的研究。数据显示：相同路径所代表的地区PM2.5和PM10具有很好的相关性,多数路径上PM2.5与PM10数据的相关系数平方在0．95以上,而不同路径上PM2.5与PM10的比值不同。文中给出了宁波市PM2.5／PM10污染的空间分布图,直观地显示出PM2.5／PM10污染的空间分布情况,突出了污染的重点点位和地区。     

The influence of use-related,environmental, and managerial factors on soil loss from recreational trails

Recreational uses of unsurfaced trails inevitably result in their degradation, with the type and extent of resource impact influenced by factors such as soil texture, topography, climate, trail design and maintenance, and type and amount of use. Of particular concern, the loss of soil through erosion is generally considered a significant and irreversible form of trail impact. This research investigated the influence of several use-related, environmental, and managerial factors on soil loss on recreational trails and roads at Big South Fork National River and Recreation Area, a unit of the U.S. National Park Service. Regression modeling revealed that trail position, trail slope alignment angle, grade, water drainage, and type of use are significant determinants of soil loss. The introduction of individual and groups of variables into a series of regression models provides improved understanding and insights regarding the relative influence of these variables, informing the selection of more effective trail management actions. Study results suggest that trail erosion can be minimized by avoiding “fall-line” alignments, steep grades, and valley-bottom alignments near streams, installing and maintaining adequate densities of tread drainage features, applying gravel to harden treads, and reducing horse and all-terrain vehicle use or restricting them to more resistant routes.     

The influence of radiopharmaceutical isotope production on the global radioxenon background

Radioxenon isotopes play a major role in confirming whether or not an underground explosion was nuclear in nature. It is then of key importance to understand the sources of environmental radioxenon to be able to distinguish them from those of a nuclear explosion.     

White clover clones as a cost-effective indicator of phytotoxic ozone: 10 years of experience from central Italy

Data collected at one site in central Italy using the NC-S/NC-R clover (Trifolium repens) biotype system during 1997-2007 were analysed in order to assess: (a) its performance under Mediterranean conditions; (b) variations of ozone damage linked with meteorological conditions; (c) if critical level approach is a good predictor of ozone risk on vegetation. NC-S dry biomasses were systematically lower than those of NC-R, the mean ratio being 0.7. Relevant relationship between ozone visible injury and cumulated values of AOT40 were also reported. Temperature and number of rainy days were the most important factors associated with ozone presence and, as a consequence, with leaf injury index. Photosynthetic gas exchange properties indicate that NC-S has higher values of stomatal conductance.     

Assessment of present and future risk to Italian forests and human health: Modelling and mapping

A review of ozone pollution in Italy shows levels largely above the thresholds established by EU regulation for vegetation and human health protection. The Italian air quality monitoring network appears quantitatively inadequate to cover all the territorial surface, because of scarcity and unequal distribution of monitoring sites. By applying the integrated assessment model RAINS-Italy to the year 2000, the whole of Italy exceeds the AOT40 critical level for forest, while Northern and central areas show strong potential of O₃ impact on human health with ∼11% of territory >10 O₃-induced premature deaths. Two scenarios for the year 2020, the Current Legislation and the Maximum Technical Feasible Reduction, show a reduction of AOT40Forest by 29% and 44%, SOMO35 by 31% and 47%, and O₃-induced premature deaths by 32% and 48%, compared to 2000. RAINS-Italy can be used to improve the map quality and cover areas not reached by the national monitoring network.     

Substance-related environmental monitoring

Background  Due to the requirements of the EU Water Framework Directive and other legal regulations (e.g., national laws like the German Federal Soil Protection Act), but also due to the implementation of the new EU chemicals management system REACH, environmental monitoring will gain increasing importance for the surveillance of environmental quality as well as for the assessment of chemicals. Against this background, the Work Group on ‘Environmental Monitoring’ of the Division of ‘Environmental Chemistry and Ecotoxicology’ within the German Chemical Society has compiled a position paper on substance-related environmental monitoring. Scope  Core elements of this position paper are the definitions of important terms like monitoring, exposure monitoring, effect monitoring, and integrated monitoring. Moreover, temporal and spatial aspects (monitoring of spatial distributions, trend monitoring, and retrospective monitoring) and their applications are discussed. The main focus of this position paper is the coverage of aspects which have to be observed for the preparation and implementation of a monitoring program. Essential is the clear specification of the targets of the monitoring which determine the development of the monitoring concept and its realization, e.g., if environmental media (compartments) or organisms are most appropriate as samples for the aim of the study. Of course, also the properties of the target substances are important (e.g., lipophilicity/bioaccumulation as pre-requisite for an exposure monitoring with organisms). Finally, the monitoring phases of sample planning, sampling, storage and transport of samples, selection of analytical methods, quality assurance measures as well as reporting are discussed. Perspectives  An important issue for the future is to link the quantification of chemicals in environmental compartments (exposure and pollution monitoring) more closely to the study of biological effects (effect monitoring) than has been the case up to now. Furthermore, by inclusion of a spatial differentiation, a comprehensive evaluation of the state of an ecosystem can be obtained and the relevance of the results improved. Practical examples of monitoring studies which illustrate various aspects covered in this position paper will be presented in a series of publications by members of the Work Group in the following issues of this journal.

Analysis of long-term changes in the dates of seasonal phenomena in plants and insects of the Il’men Reserve as related to climatic factors

The results of monitoring the dates of the onset of flowering and leaf budding in eight herbaceous and woody plant species and the first appearance of three insect species in the Il’men Reserve (1972–2005) were processed by means of regression and correlation analyses. No significant changes in test parameters were revealed in the majority of these species. Only two early spring plants, coltsfoot (Tussilago farfara L.) and goat willow (Salix caprea L.), showed a weak tendency toward earlier flowering in the 1980s and 1990s. This is explained primarily by the absence of any significant trends in spring and summer air temperatures in the study region over the observation period. On the other hand, interannual fluctuations in the dates of plant flowering and insect appearance were well manifested not only in early spring but also in late-spring species. These fluctuations proved to depend largely on spring temperatures: in years with early and warm springs, flowering and leaf budding in plants and the appearance of first individuals in insects were recorded on significantly earlier dates.     

Influence of temporally variable groundwater flow conditions on point measurements and contaminant mass flux estimations

Monitoring of contaminant concentrations, e.g., for the estimation of mass discharge or contaminant degradation rates, often is based on point measurements at observation wells. In addition to the problem, that point measurements may not be spatially representative, a further complication may arise due to the temporal dynamics of groundwater flow, which may cause a concentration measurement to be not temporally representative. This paper presents results from a numerical modeling study focusing on temporal variations of the groundwater flow direction. “Measurements” are obtained from point information representing observation wells installed along control planes using different well frequencies and configurations. Results of the scenario simulations show that temporally variable flow conditions can lead to significant temporal fluctuations of the concentration and thus are a substantial source of uncertainty for point measurements. Temporal variation of point concentration measurements may be as high as the average concentration determined, especially near the plume fringe, even when assuming a homogeneous distribution of the hydraulic conductivity. If a heterogeneous hydraulic conductivity field is present, the concentration variability due to a fluctuating groundwater flow direction varies significantly within the control plane and between the different realizations. Determination of contaminant mass fluxes is also influenced by the temporal variability of the concentration measurement, especially for large spacings of the observation wells. Passive dosimeter sampling is found to be appropriate for evaluating the stationarity of contaminant plumes as well as for estimating average concentrations over time when the plume has fully developed. Representative sampling has to be performed over several periods of groundwater flow fluctuation. For the determination of mass fluxes at heterogeneous sites, however, local fluxes, which may vary considerably along a control plane, have to be accounted for. Here, dosimeter sampling in combination with time integrated local water flux measurements can improve mass flux estimates under dynamic flow conditions.