CMT监测井在黑河流域地下水监测中的应用

以CMT监测井在黑河流域的应用为基础,通过对监测数据和采集的水样进行分析,了解了黑河流域地下水水位动态变化,掌握了黑河流域地下水水化学垂向分布规律,为合理利用黑河流域水资源提供了科学依据。     

环境空气中VOC_S在线监测法与SUMMA罐采样气相色谱-质谱法比对研究

定性比较了环境空气VOCs在线监测法和SUMMA罐采样GC-MS法的基本原理、检测化合物种类和适用范围,并对标样实验、日均浓度、小时浓度从统计学角度进行了定量比对.研究表明,VOCs在线监测法监测结果与实验室方法有较好可比性,可用于相关领域VOCs的连续监控.     

电极流动分析仪的研制和应用

采用固定电极测试状态的方法，将流动技术引入到离子电极直接电位分析法中，设计并试制了电极流动分析仪。配用市售硝酸根电极、钠电极、氟电极、氯电极和氨电极进行了环境样品的测定。结果表明，电极流动分析仪法的分析速度比直接电位法提高２－３倍，变异系数，２．９％－５．０％之间，回收率在９０％－１０５％之间；直接电位法变异系数在２．３％－６．７％之间，加收率在９０％－１０９％之间。     

Alternative method to prevent thermal runaway in case of error on operating conditions continuous reactor

Thermal runaway was studied in a continuous tubular pilot reactor under steady-state regime. Different accident scenarii were conducted by making some errors on reactant concentrations and/or temperature feed. To prevent thermal runaway, control by direct contact by solvent injection was used at different reactor locations. This injection allowed controlling the maximum reaction temperature. A simplified analytical method to estimate the maximum reaction temperature along the reactor was used.Benefit of this control method was the diminution of computational time. Furthermore, by injecting solvent to control maximum reaction temperature, there is no need to shut down the unit. The control method was validated experimentally.     

污染源在线监测系统（CEMS）的验收比对监测

随着节能减排的开展,各重点污染源企业,特别是SO2等标排放负荷较大的热电、钢铁等使用燃煤锅炉的企业,都按照环保局的要求安装了污染源在线监测系统CEMS。CEMS数据的可靠性、正确性、稳定性对于污染减排有着决定性作用,CEMS已成为一种最有效的定量和监控管理手段。本文介绍了CEMS系统的组成及功能,以及验收监测比对法规依据,并根据《固定污染源烟气排放连续监测技术规范》（HJ／T75—2007）（试行）和《固定污染源烟气排放连续监测系统技术要求及检测方法》（HJ／T75—2007）（试行）验收监测比对指标,简要说明了验收比对的方法并分析了在实际监测中遇到的问题,提出了需要注意的事项。     

Response of bioaerosol cells to photocatalytic inactivation with ZnO and TiO2 impregnated onto Perlite and Poraver carriers

•ZnO/Perlite inactivated 72% of bioaerosols in continuous gas phase. •TiO₂ triggered the highest level of cytotoxicity with 95% dead cells onto Poraver. •Inactivation mechanism occurred by membrane damage, morphological changes and lysis. •ZnO/Poraver showed null inactivation of bioaerosols. •Catalysts losses at the outlet of the photoreactor for all systems were negligible. Bioaerosols are airborne microorganisms that cause infectious sickness, respiratory and chronic health issues. They have become a latent threat, particularly in indoor environment. Photocatalysis is a promising process to inactivate completely bioaerosols from air. However, in systems treating a continuous air flow, catalysts can be partially lost in the gaseous effluent. To avoid such phenomenon, supporting materials can be used to fix catalysts. In the present work, four photocatalytic systems using Perlite or Poraver glass beads impregnated with ZnO or TiO₂ were tested. The inactivation mechanism of bioaerosols and the cytotoxic effect of the catalysts to bioaerosols were studied. The plug flow photocatalytic reactor treated a bioaerosol flow of 460×1 0⁶ cells/m³_air with a residence time of 5.7 s. Flow Cytometry (FC) was used to quantify and characterize bioaerosols in terms of dead, injured and live cells. The most efficient system was ZnO/Perlite with 72% inactivation of bioaerosols, maintaining such inactivation during 7.5 h due to the higher water retention capacity of Perlite (2.8 mL/g_Perlite) in comparison with Poraver (1.5 mL/g_Perlite). However, a global balance showed that TiO₂/Poraver system triggered the highest level of cytotoxicity to bioaerosols retained on the support after 96 h with 95% of dead cells. SEM and FC analyses showed that the mechanism of inactivation with ZnO was based on membrane damage, morphological cell changes and cell lysis; whereas only membrane damage and cell lysis were involved with TiO₂. Overall, results highlighted that photocatalytic technologies can completely inactivate bioaerosols in indoor environments.     

Photocatalytic degradation of the acetaminophen by nanocrystal-engineered TiO2 thin film in batch and continuous system

• Photocatalytic activity was improved in TiO₂ thin film by rapid thermal annealing. • Photoreactor was designed for TiO₂ thin film. • Considerable reusability and durability of prepared photocatalysts were studied. Un-biodegradable pharmaceuticals are one of the major growing threats in the wastewaters. In the current study, TiO₂ thin film photocatalysts were designed by nanocrystal engineering and fabricated for degradation of the acetaminophen (ACE) in a photocatalytic reaction under UV light irradiation in batch and continuous systems. The photocatalyst was prepared by sputtering and then engineered by thermal treatment (annealing at 300℃ (T300) and 650℃ (T650)). The annealing effects on the crystallinity and photocatalytic activity of the TiO₂ film were completely studied; it was found that annealing at higher temperatures increases the surface roughness and grain size which are favorable for photocatalytic activity due to the reduction in the recombination rate of photo-generated electron-hole pairs. For the continuous system, a flat plate reactor (FPR) was designed and manufactured. The photocatalytic performance was decreased with the increase of flow rate because the higher flow rate caused to form the thicker film of the liquid in the reactor and reduced the UV light received by photocatalyst. The reusability and durability of the samples after 6 h of photocatalytic reaction showed promising performance for the T650 sample (annealed samples in higher temperatures).     

中美固定源烟气排放连续监测系统对比浅析

简述了我国烟气排放连续监测系统(CEMS)概况;介绍了美国CEMS体系及先进的管理经验,并从CEMS运营责任主体、管理依据、审核与管理模式以及数据应用等方面对中美CEMS体系进行了对比分析,在此基础上,提出了我国CEMS存在的问题和相应的对策建议.     

非枝晶半固态金属成形技术的发展概况

此文叙述了非枝晶半固态金属成形技术的发展概况。主要介绍了压铸成形、模锻成形、连续流变铸造成形、注射成形以及半固态金属锭料制造等技术的特点和应用现状。     

连续流动法测定沉积物中的酸挥发性硫化物

优化沉积物中酸挥发性硫化物(Acid Volatile Sulfide,AVS)的提取方法并采用连续流动分析法检测提取液中的硫化物.研究了吸收液的种类、氮气流量与吹气的时间和反应温度对AVS提取效果的影响以优化提取方法.结果表明,与传统的氢氧化钠或硫酸镉-氢氧化钠吸收液相比,以氯化锌-羧甲基纤维素钠溶液为吸收液吸附效率好,稳定性高且无毒.用连续流动分析法检测提取液中的AVS快速、准确、稳定性好.