Optimization of the O3/H2O2 process with response surface methodology for pretreatment of mother liquor of gas field wastewater

• Real ML-GFW with high salinity and high organics was degraded by O₃/H₂O₂ process. • Successful optimization of operation conditions was attained using RSM based on CCD. • Single-factor experiments in advance ensured optimal experimental conditions. • The satisfactory removal efficiency of TOC was achieved in spite of high salinity. • The initial pH plays the most significant role in the degradation of ML-GFW. The present study reports the use of the O₃/H₂O₂ process in the pretreatment of the mother liquor of gas field wastewater (ML-GFW), obtained from the multi-effect distillation treatment of the gas field wastewater. The range of optimal operation conditions was obtained by single-factor experiments. Response surface methodology (RSM) based on the central composite design (CCD) was used for the optimization procedure. A regression model with Total organic carbon (TOC) removal efficiency as the response value was established (R² = 0.9865). The three key factors were arranged according to their significance as: pH>H₂O₂ dosage>ozone flow rate. The model predicted that the best operation conditions could be obtained at a pH of 10.9, an ozone flow rate of 0.8 L/min, and H₂O₂ dosage of 6.2 mL. The dosing ratio of ozone was calculated to be 9.84 mg O₃/mg TOC. The maximum removal efficiency predicted was 75.9%, while the measured value was 72.3%. The relative deviation was found to be in an acceptable range. The ozone utilization and free radical quenching experiments showed that the addition of H₂O₂ promoted the decomposition of ozone to produce hydroxyl radicals (·OH). This also improved the ozone utilization efficiency. Gas chromatography-mass spectrometry (GC-MS) analysis showed that most of the organic matters in ML-GFW were degraded, while some residuals needed further treatment. This study provided the data and the necessary technical supports for further research on the treatment of ML-GFW.     

反硝化细菌、硝酸钙和锆改性沸石联用对底泥中氮磷迁移转化的影响及硝态氮释放风险评估

本文考察了基于反硝化细菌、硝酸钙和锆改性沸石的组合技术（CN+DB+ZZ）对底泥中氮磷迁移转化的影响,并探讨了该技术的硝态氮释放风险.结果发现,单一的硝酸钙处理（CN）虽然可以有效地抑制底泥中磷的释放,但是会造成上覆水体的氨氮和硝态氮污染.硝酸钙和反硝化细菌联合处理（CN+DB）尽管可以有效地抑制底泥中磷的释放,并降低上覆水体的硝态氮二次污染风险,可是却无法有效地控制底泥中氨氮的释放.硝酸钙和锆改性沸石联合处理（CN+ZZ）虽然可以有效地抑制底泥中磷和氨氮向上覆水体的释放,但却会造成上覆水体硝态氮的二次污染.CN+DB+ZZ组合处理技术不仅可以有效地控制底泥中磷的释放,而且可有效降低底泥中氨氮的释放速率,并且与CN和CN+ZZ技术相比还可降低上覆水的硝态氮二次污染风险.CN+DB+ZZ组合技术对底泥中磷与铁同步释放的抑制、对底泥中氧化还原敏感态磷的削减、以及对底泥吸附磷酸盐和氨氮能力的增强,对于其控制底泥中磷和氨氮的释放是至关重要的.以上结果说明,CN+DB+ZZ组合技术是一种非常有希望的用于控制水体底泥中磷和氨氮释放的方法.     

铁碳微电解及沸石组合人工湿地的废水处理效果

铁碳微电解填料和沸石由于对废水中污染物具有良好的处理效果,因而被作为基质逐渐运用于人工湿地中.本研究构建了铁碳微电解填料+砾石（湿地A）、铁碳微电解填料+沸石（湿地B）、沸石（湿地C）以及砾石（湿地D）为基质的4组人工湿地,并利用间歇曝气对湿地系统进行增氧,探究不同填料对人工湿地废水处理效果的影响.结果表明,与湿地D相比,铁碳微电解填料显著提高了湿地出水的溶解氧含量（DO）（P<0.05）和pH（P<0.05）;4组人工湿地对有机物的去除率均达到95%以上,且各组间不存在显著性差异（P>0.05）;对TN而言,湿地A、B和C的平均去除率分别比湿地D提高了7.94%（P<0.05）、9.29%（P<0.05）和3.63%（P<0.05）,铁碳微电解填料和沸石对提升人工湿地TN去除效果的贡献率分别为73.55%和26.45%;各组湿地对NH₄⁺的平均去除率为67.93%~76.90%,与湿地D相比,其它3组湿地均明显改善了NH₄⁺的去除效果（P<0.05）;铁碳微电解填料对湿地NO₃^-的去除效果极佳,去除率高达99%以上,显著高于不添加铁碳微电解的人工湿地系统（P<0.05）.综合对碳氮污染物的处理效果来看,湿地B在间歇曝气的条件下对人工湿地中污染物去除效率最高.     

两级CSTR亚硝化启动及稳定运行试验研究

采用两级CSTR反应器对实际生活污水亚硝化的启动过程及稳定运行主要影响因素进行了研究.通过向生活污水里投加(NH₄)₂SO₄来提高进水氨氮浓度,并逐渐调整两级反应器的曝气强度至DO浓度分别为(1.5±0.12),(0.35±0.1) mg/L,历经45d即实现了亚硝化的启动,亚硝化率保持在90.3%以上,氨氧化率保持在91.2%以上.低氨氮生活污水运行时,通过第一级反应器中三组DO/ALR的效果对比,表明DO/ALR在1.2~2.0 mg O₂/(gN·d)时亚硝化效果最好.降低氨氮浓度以及增大HRT两种情况下导致ALR改变时,维持上述DO/ALR范围依然可以保证亚硝化的稳定.     

硫铁填料和微电流强化再生水脱氮除磷的研究

为提高再生水质量,在不同C/N和HRT条件下,对比分析硫铁复合填料和微电流作用强化再生水深度脱氮除磷效果.结果表明,硫铁复合填料和微电流作用均能够强化氮、磷的深度去除效果,且二者结合能够使反硝化系统pH值稳定在7.2~8.5之间.系统中TN主要靠异养反硝化、氢自养反硝化和硫自养反硝化作用去除,94.04%的TP是以生成磷酸铁沉淀的形式去除.分别从填料上取生物膜,进行Miseq高通量测序,构建细菌16S rRNA基因克隆文库.结果发现,在仅有海绵铁作用系统中,同时具有异养反硝化和氢自养反硝化功能的细菌所占比例达到29.47%;硫铁复合填料和硫铁微电流作用系统中,具有硫自养反硝化功能的Thiobacillus(硫杆菌属)所占比例分别达到60.47%和40.62%.因此,硫铁复合填料和微电流作用用于强化再生水深度脱氮除磷具有明显的优势.     

晋北地区1986~2010年土地利用/覆被变化的驱动力

为定量研究不同时期区域土地利用变化的不同驱动特征,以地处农牧交错带的晋北地区为例,采用非监督分类与人工目视解译相结合的方法,获取研究区1986~2010年间的土地利用/覆被变化（LUCC）状况,采用典范对应分析（CCA）方法定量分析了不同阶段LUCC的自然与人为驱动特征.结果表明：1）CCA在分析长时期序列LUCC驱动力上有较好的解释力,CCA排序可以很好地提取LUCC与自然、人为因素之间的关系,反映不同时期土地利用变化受到的驱动作用;2）研究区土地利用类型以耕地、草地、林地为主,土地利用变化类型以耕地与草地、林地与草地之间的互相转移为主;3）从不同时期LUCC的驱动因子来看,人口密度、人均国内生产总值（GDP）、降水、坡度和高程是研究区各时期LUCC的主要驱动力;研究区在1986~1995年间LUCC的主要驱动力来自于人口增长和经济发展的需求,而随着时间的推进,坡度和高程等地形因素的驱动作用也愈来愈重要;4）从不同地类变化的驱动因子来看,耕地、草地等地类向居民用地、工矿用地转移的主要驱动力是人口和经济的发展;而林地,草地等土地覆被类型之间的转移主要受到坡度,高程和降水等自然因素的驱动.     

基于LUCC的艾比湖区域生态风险评价及预测研究

以新疆内陆艾比湖流域典型区域为研究区,基于RS和GIS技术分析1998、2013年土地利用变化,尝试用CA-Markov模型预测2028年土地利用/覆盖变化.借助Fragstats3.4软件,基于土地利用/覆盖变化构建景观生态风险评价模型,分析1998~2028年景观生态风险的时空分异特征.结果表明：（1）1998~2013年,研究区土地类型面积变化明显.耕地面积增加量最大,增加的面积为152139hm²,而未利用地面积减少量最大,减少的面积为67605hm².2013~2028年,耕地和裸露的河床及盐渍地的面积增加明显,增加的面积分别为30730hm²,12427hm²,而未利用地和水体的面积分别从954376hm²和44889hm²,减至921079hm²和37157hm².（2）1998~2028年,研究区生态风险等级空间分布差异明显.高生态风险区面积变化较为显著,其面积分别约占总面积的36.6%,7.3%,23.7%.1998~2028年,全局Moran's Ⅰ值分别为0.436962,0.442202,0.506622,表现为一定程度的正相关.（3）1998~2028年,耕地分布在低,较低生态风险的比重上升,所占百分比分别为58.46%,78.58%,79.9%.林、草地类型的各生态风险等级的所占的比重的波动较大.     

Arsenic trophodynamics along the food chains/webs of different ecosystems: a review

In drinking water, arsenic (As) food chain accumulation may pose a risk to human health. An attempt was made to synthesise the published information concerning As trophic transfer along the food chain/web of various marine, freshwater, and terrestrial ecosystems. Some investigations included As speciation. Further objectives were to outline the factors potentially influencing As trophodynamics and to understand the consequence of As trophic transfer in the environment.     

丙烯腈-丁二烯-苯乙烯塑料、四溴双酚A混合物的热解实验:含溴二噁英生成研究

模拟电子垃圾热回收处理过程,将丙烯腈-丁二烯-苯乙烯塑料(ABS)、四溴双酚A(TBBPA)分别与4种金属(Cu、Fe、Zn和Ni)进行混合,在自制的加热装置内开展了不同气氛、不同温度条件下热解实验研究。对产物溴代二噁英(PBDD/Fs)检测显示,2,3,7,8-TBDF、2,3,7,8-TBDD及1,2,3,4,7,8-与1,2,3,6,7,8-Hx BDD为主要产物,其中2,3,7,8-TBDF含量最高,约占总PBDD/Fs的12%~90%。反应生成的8种2,3,7,8-PBDD/Fs浓度范围为0.05~2 082 ng·g-1。在同等实验条件下,温度升高有利于ABS塑料混合物中PBDD/Fs的生成。Cu、Fe、Zn和Ni四种金属都具有催化效应。空气、氮气气氛下热解实验显示,空气气氛下PBDD/Fs的生成量大,2种条件下生成的二噁英总量比值在0.8~99.6之间变化。无金属催化条件下此比值变化范围较小,为0.8~1.5;在金属参与条件下,此比值变化范围加大,为1.2~99.6;其中,在Cu和Fe参与下,此比值较高。各种热解条件下形成的PBDD/Fs都具有PBDFsPBDDs的特征。研究结果说明,虽然无金属参与条件下含TBBPA的ABS热解生成溴代二噁英浓度较低,但金属(如Cu等)存在时,此类污染物的浓度显著增加。     

Fe-Mn-sepiolite as an effective heterogeneous Fenton-like catalyst for the decolorization of reactive brilliant blue

A study of the decolorization of reactive brilliant blue in an aqueous solution using Fe-Mn-sepiolite as a heterogeneous Fenton-like catalyst has been performed. The Fourier transform infrared (FTIR) spectra of the catalyst showed bending vibrations of the Fe-O. The X-ray diffraction (XRD) patterns of the catalyst showed characteristic diffraction peaks of α-Fe₂O₃, γ-Fe₂O₃ and MnO. A four factor central composite design (CCD) coupled with response surface methodology (RSM) was applied to evaluate and optimize the important variables (catalyst addition, hydrogen peroxide dosage, initial pH value and initial dye concentration). When the reaction conditions were catalyst dosage= 0.4 g, [H₂O₂]= 0.3 mL, pH= 2.5, [reactive brilliant blue]_o = 50 mg·L⁻¹, and volume of solution= 500 mL at room temperature, the decolorization efficiency of reactive brilliant blue was 91.98% within 60 min. Moreover, the Fe-Mn-sepiolite catalyst had good stability for the degradation of reactive brilliant blue even after six cycles. Leaching of iron ions (<0.4 mg·L⁻¹) was observed. The decoloring process was reactive brilliant blue specific via a redox reaction. The benzene ring and naphthalene ring were first oxidized to open ring; these were then oxidized to the alcohol and carboxylic acid. The reactive brilliant blue was decomposed mainly by the attack of ·OH radicals including surface-bound ·OH radicals generated on the catalyst surface.