综合拉底、扩漏和出矿全过程的底部结构安全性颗粒流模拟技术研究

为探明自然崩落法从拉底崩落至出矿全过程中底部结构节理连续扩展过程与破坏过程规律，采用PFC2D软件，结合RocLab软件反演节理岩体参数，建立229 m×129 m的岩体扩大模型，对拉底崩落至出矿过程进行连续综合计算。研究结果表明:模拟结果及破坏现象与现场监测结果相近，建模与细观参数反演方法适用于该类岩体工程研究；裂纹扩展贯通导致岩体失稳破坏，破坏过程与裂纹扩展具有相对应的阶段特征，裂纹扩展分为崩落前稳定扩展期，崩落与聚矿槽开挖过程加速扩展期和后续持续扩展期；结构破坏分为蕴育过程，扰动失稳过程和宏观破坏过程；较大范围的宏观破坏主要在出矿阶段。该模拟方法与结果可为底部结构维护以及节理岩体长期稳定性研究提供参考。     

Ammonium nitrate thermal decomposition with additives

Runaway reactions present a potentially serious threat to the chemical process industry and the community; such reactions occur time and time again often with devastating consequences. The main objective of this research is to study the root causes associated with ammonium nitrate (AN) explosions during storage. The research focuses on AN fertilizers and studies the effects of different types of fertilizer compatible additives on AN thermal decomposition. Reactive Systems Screening Tool (RSST) has been used for reactivity evaluation and to better understand the mechanisms that result in explosion hazards. The results obtained from this tool have been reported in terms of parameters such as “onset” temperature, rate of temperature and pressure rise and maximum temperature. The runaway behavior of AN has been studied as a solid and solution in water. The effect of additives such as sodium sulfate (Na₂SO₄) and potassium chloride (KCl) has also been studied. Multiple tests have been conducted to determine the characteristics of AN decomposition accurately. The results show that the presence of sodium sulfate can increase the “onset” temperature of AN decomposition thus acting as AN thermal decomposition inhibitor, while potassium chloride tends to decrease the “onset” temperature thus acting as AN thermal decomposition promoter.     

Dynamic pressure induced by a methane–air explosion in a coal mine

The hazardous effect of dynamic pressure and strong gas flows induced by a methane–air mixture explosion in underground coal mines is studied. The dynamic pressure effect of a methane–air explosion was analyzed by numerical simulation, in a duct and tunnel. Compared to the overpressure generated by an explosion that can act on a body, the dynamic pressure caused by the high-speed flow of the gaseous combustion products can cause serious damage as well. At the structural opening of a coal mine, the destruction caused by the dynamic pressure induced by a methane–air explosion is more serious than the overpressure. For a tube or tunnel partially filled by a methane–air mixture, the dynamic pressure is lower than the overpressure in the region occupied by the flammable mixture. Beyond the premixed region, the dynamic pressure is of the same order of magnitude as the overpressure.     

An experimental study on the burning rate of a continuously released n-heptane spill fire on an open water surface

Spill fires are common during oil product storage and transportation after a loss of containment. Since the burning fuel is moving and the fuel depth is quite shallow, the burning rate in a spill fire is different from that of a pool fire with a static burning zone. Unlike pool fires, which have been studied for decades and have well-established correlations for burning rate, research on spill fires is inadequate. In this paper, continuously released n-heptane spill fire experiments were conducted on open water surfaces with varying fuel discharge rates. The pool diameters were measured, and the spill fire burning rates were estimated based on a dynamic balance between fuel supply and combustion. The burning rates in n-heptane pool fires from the literature were reviewed and compared with the estimated burning rates in spill fires of the same dimension. The spill fire burning rate was found to be close to that in a pool fire during the initial burning phase but lower than that in a bulk burning pool fire and that in a “fuel-level-controlled” pool fire. The distinction between the burning rates of spill fires and pool fires is explained by the heat balance analysis of the fuel layer. A model for the spill fire burning rate was proposed accordingly. The results calculated with the presented model are closer to the measured data than those calculated with pool fire models.     

Vallisneria natans decomposition rates and associated macroinvertebrates,microbes and microalgae along a vertical depth gradient in an urban lake (Nanhu Lake,China)

Knowledge on aquatic macrophyte decomposition has well developed, yet the decomposition and associated biotic factors along a vertical gradient in waters remain less examined. Here, we used Vallianeria natans leaves to investigate the decomposition rate and associated decomposers and microalgae at different vertical depths, by placing V. natans leaves into litterbags (0.5 and 5?mm meshes) and incubating them at the air–water interface (AW), sediment-water (SW) interface, and 10?cm (B10) or 20?cm (B20) burial in sediment over 60 days in a littoral zone of lake. Decomposition rates decreased with increased depths in each mesh size, with significant differences among and between AW (0.028?d^?1), SW (0.022?d^?1), B10 (0.014?d^?1) and B20 (0.011?d^?1) treatments in 0.5?mm litterbags and no significant difference between B10 (0.027?d^?1) and B20 (0.025?d^?1) in 5?mm litterbags. The average contribution of macroinvertebrates to biomass loss was highest in B20 (44.66%), lowest in AW (22.66%) and midst in both SW (25.35%) and B10 (38.78%), and was much less than that of both microbes and microalgae at each location. We show the importance of macroinvertebrates, microbes and microalgae in mediating macrophyte decomposition rate in response to different vertical locations in freshwaters.     

Estimating the normal background rate of species extinction

A key measure of humanity's global impact is by how much it has increased species extinction rates. Familiar statements are that these are 100–1000 times pre‐human or background extinction levels. Estimating recent rates is straightforward, but establishing a background rate for comparison is not. Previous researchers chose an approximate benchmark of 1 extinction per million species per year (E/MSY). We explored disparate lines of evidence that suggest a substantially lower estimate. Fossil data yield direct estimates of extinction rates, but they are temporally coarse, mostly limited to marine hard‐bodied taxa, and generally involve genera not species. Based on these data, typical background loss is 0.01 genera per million genera per year. Molecular phylogenies are available for more taxa and ecosystems, but it is debated whether they can be used to estimate separately speciation and extinction rates. We selected data to address known concerns and used them to determine median extinction estimates from statistical distributions of probable values for terrestrial plants and animals. We then created simulations to explore effects of violating model assumptions. Finally, we compiled estimates of diversification—the difference between speciation and extinction rates for different taxa. Median estimates of extinction rates ranged from 0.023 to 0.135 E/MSY. Simulation results suggested over‐ and under‐estimation of extinction from individual phylogenies partially canceled each other out when large sets of phylogenies were analyzed. There was no evidence for recent and widespread pre‐human overall declines in diversity. This implies that average extinction rates are less than average diversification rates. Median diversification rates were 0.05–0.2 new species per million species per year. On the basis of these results, we concluded that typical rates of background extinction may be closer to 0.1 E/MSY. Thus, current extinction rates are 1,000 times higher than natural background rates of extinction and future rates are likely to be 10,000 times higher. Estimación de la Tasa Normal de Extinción de Especies     

煤矿照度对人反应时间和可靠度的影响研究

煤矿综采工作面狭窄,工作环境昏暗,照明环境普遍不好,是近年来井下事故多发的重要因素之一。针对目前煤矿综采工作面存在的照度问题,通过控制光照时间和操作难度,利用舒尔特表测算反应时间和操作可靠度,使用SPSS20. 0和Excel进行数据处理,设计试验组和对照组来进行对比试验。结果表明,1)从反应时间来看,0～25 min,试验组平均反应时间的变化趋势与对照组相反,被试者的注意力先下降后上升; 25～55 min,被试者逐渐适应低照度环境,反应时间也在逐渐缩短;被试者在低照度条件下操作55 min后,反应时间随光照时间增加而大幅度增加,超过劳动时间临界值后,视觉疲劳度迅速增加,反应急速减慢,从而可能导致安全事故的发生,影响生产效率,此时应合理安排工人休息。2)从操作难度来看,在简单及正常操作难度时,试验组和对照组操作可靠度变化比较接近,表明低照度条件对一般操作的可靠度影响不明显;在极难操作难度时,低照度条件对可靠度影响明显,在井下生产过程中,低照度环境下应尽量避免安排复杂的机械化操作。3)反应时间与光照时间呈二次函数关系,通过建立回归方程量化了两者的关系,为以后合理安排煤矿工人劳动休息时间提供了理论依据。     

Deriving heart rate variability indices from cardiac monitoring—An indicator of driver sleepiness

Objective: Driver fatigue is considered to be a major contributor to road traffic crashes. Cardiac monitoring and heart rate variability (HRV) analysis is a candidate method for early and accurate detection of driver sleepiness. This study has 2 objectives: to evaluate the (1) suitability of different preprocessing strategies for detecting and removing outlier heartbeats and spectral transformation of HRV signals and their impact of driver sleepiness assessment and (2) relation between common HRV indices and subjective sleepiness reported by a large number of drivers in real driving situations, for the first time.

Methods: The study analyzed >3,500 5-min driving epochs from 76 drivers on a public motorway in Sweden. The electrocardiograph (ECG) data were recorded in 3 studies designed to evaluate the physiological differences between awake and sleepy drivers. The drivers reported their perceived level of sleepiness according to the Karolinska Sleepiness Scale (KSS) every 5?min. Two standard methods were used for identifying outlier heartbeats: (1) percentage change (PC), where outliers were defined as interbeat intervals deviating >30% from the mean of the four previous intervals and (2) standard deviation (SD), where outliers were defined as interbeat interval deviating >4 SD from the mean interval duration in the current epoch. Three standard methods were used for spectral transformation, which is needed for deriving HRV indices in the frequency domain: (1) Fourier transform; (2) autoregressive model; and (3) Lomb-Scargle periodogram. Different preprocessing strategies were compared regarding their impact on derivation of common HRV indices and their relation to KSS data distribution, using box plots and statistical tests such as analysis of variance (ANOVA) and Student’s t test.

Results: The ability of HRV indices to discriminate between alert and sleepy drivers does not differ significantly depending on which outlier detection and spectral transformation methods are used. As expected, with increasing sleepiness, the heart rate decreased, whereas heart rate variability overall increased. Furthermore, HRV parameters representing the parasympathetic branch of the autonomous nervous system increased. An unexpected finding was that parameters representing the sympathetic branch of the autonomous nervous system also increased with increasing KSS level. We hypothesize that this increment was due to stress induced by trying to avoid an incident, because the drivers were in real driving situations.

Conclusions: The association of HRV indices to KSS did not depend on the preprocessing strategy. No preprocessing method showed superiority for HRV association to driver sleepiness. This was also true for combinations of methods for frequency domain HRV indices. The results prove clear relationships between HRV indices and perceived sleepiness. Thus, HRV analysis shows promise for driver sleepiness detection.     

双风机并联机站局阻特性研究

为探究双风机并联机站局部阻力特性、完善机站局部阻力及其系数的计算公式,以实际矿井通风机站为工程背景,在分析机站流场能量损失机理的基础上,采用物理模型实验和数值计算相结合的方法,分析了机站入口分流、出口汇流的断面速度不均匀程度与机站阻力损失的关系,同时对不同宽高比的矩形断面进行多工况模拟。结果表明:断面速度不均匀性越大,速度分布重组造成的阻力损失越大;确定了机站局阻计算所需参数的合理测定位置,得出机站局阻系数计算时的综合影响系数Kc随风机工况增大而增大、随断面宽高比A增大而减小,并呈现较好的线性关系。研究结果可为多级机站通风系统通风阻力特性分析以及工程优化设计提供参考。     

基于CFD-DEM的旋风除尘器内气固流动特性研究

为了研究旋风除尘器内气固流动特性,采用CFD-DEM耦合算法研究不同入口气体速度下旋风除尘器内颗粒流态、静压、径向速度及轴向速度分布特征。结果表明:煤屑颗粒在离心力和径向曳力的作用下以螺旋颗粒条带靠近除尘器的壁面稳定向下移动,随着入口风速的增加煤屑颗粒条带变宽,条带与除尘器的第1次接触的拐点上移,螺距减小;除尘器内部压力轴向变化较小,径向变化较大,随着入口气体速度增加,除尘器壁面附近高压区范围和压力也随之增加,除尘器上方和下方的负压区变宽并朝轴向方向延伸;随入口气体速度增加,除尘器内径向速度和轴向速度逐渐增加,煤屑颗粒在除尘器中部聚集较多,煤屑停留时间变长,入口气体速度为15 m/s时,煤屑颗粒在除尘器内停留时间最长。