二恶英类物质检测分析技术进展

介绍了同位素稀释气相色谱质谱联用和生物快速检测法测定二恶英类化合物的技术进展,概述了国际通用的二恶英类标准分析方法体系,提出了各方法的适用范围,综述了我国二恶英类化合物分析研究现状并对我国二恶英分析检测提出了建议。     

深圳市大气中PCDD/Fs污染水平初步研究

目的:了解深圳市大气中二噁(PCDD/Fs)的污染水平和分布特征。方法:利用大流量空气采样器分别采集6个采样点的空气样品,每个采样点采集两个平行样品。参照美国环保总局(US EPA Method TO-9A)二噁的检测方法,通过高分辨气相色谱-高分辨双聚焦磁式质谱仪(HRGC/HRMS)对大气样品中17种具有毒性当量因子(TEF)的单体进行了定性和定量分析。结果:∑PCDD/Fs的浓度范围为0.23～11.88pg/m3(平均值为3.84 pg/m3)。毒性当量浓度范围为0.014～0.29 pg I-TEQ/m3(平均值为0.135 pg I-TEQ/m3)。OCDD、HpCDD、HpCDF、OCDF、HxCDF是丰度较大的单体,分别占总浓度的48.21%、15.85%、11.37%、7.40%、6.59%。PCDDs和PCDFs单体浓度(除OCDF之外)均随氯原子取代个数的增加而增大。2,3,4,7,8-PeCDF对总的毒性当量贡献最大,占总毒性当量浓度的38.87%。六个采样点中有三个地点二噁同系物分布显示了"源"的特征,而另外三个地点则显示了"汇"的特征。成人的PCDD/Fs暴露量为0.0023～0.047 pg I-TEQ/kg.day;儿童PCDD/Fs暴露量为0.0052～0.11 pg I-TEQ/kg.day。结论:深圳市大气样品中二噁浓度低于国内一些城市研究水平,而高于日本、欧美国家的研究水平。     

关于火电厂验收存在的问题分析

对火电厂中以煤、天然气、油或焦油、秸秆为原料时验收监测应注意的问题进行了分析和探讨。重点提出了烟气脱硫、Hg、As、氟化物的污染以及多环芳烃、二的产生和以后环评、环评批复及验收监测中应注意的问题。     

Portuguese inventory of dioxins and furans atmospheric emissions

This article presents the results of the most recent estimation of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) atmospheric emissions in Portugal, which has covered the period 2004–2009 and includes 27 emission sources types. The results are compared with previous emissions inventories published for Portugal. The main objective of this work is to provide relevant information about the amounts of the compounds that are released into the atmosphere in Portugal, and identify their major sources and trends.     

Sulfur recirculation for increased electricity production in Waste-to-Energy plants

Sulfur recirculation is a new technology for reducing boiler corrosion and dioxin formation. It was demonstrated in full-scale tests at a Waste to Energy plant in Göteborg (Sweden) during nearly two months of operation. Sulfur was recirculated as sulfuric acid from the flue gas cleaning back to the boiler, thus creating a sulfur loop.The new technology was evaluated by extensive measurement campaigns during operation under normal conditions (reference case) and operation with sulfur recirculation. The chlorine content of both fly ash and boiler ash decreased and the sulfur content increased during the sulfur recirculation tests. The deposit growth and the particle concentration decreased with sulfur recirculation and the dioxin concentration (I-TEQ) of the flue gas was reduced by approximately 25%. Sulfuric acid dew point measurements showed that the sulfuric acid dosage did not lead to elevated SO₃ concentrations, which may otherwise induce low temperature corrosion.In the sulfur recirculation corrosion probe exposures, the corrosion rate decreased for all tested materials (16Mo3, Sanicro 28 and Inconel 625) and material temperatures (450 °C and 525 °C) compared to the reference exposure. The corrosion rates were reduced by 60–90%. Sulfur recirculation prevented the formation of transition metal chlorides at the metal/oxide interface, formation of chromate and reduced the presence of zinc in the corrosion products. Furthermore, measured corrosion rates at 525 °C with sulfur recirculation in operation were similar or lower compared to those measured at 450 °C material temperature in reference conditions, which corresponds to normal operation at normal steam temperatures. This implies that sulfur recirculation allows for higher steam data and electricity production without increasing corrosion.     

Toxic Environmental Releases from Medical Waste Incineration: A Review

Toxic releases from medical waste incineration comprising organic emissions such as polychlorinated dibenzo-dioxin/furan (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs), inorganic emissions and ashes containing toxic metals have been reviewed. Attempts made by various investigators to reduce/eliminate emissions have also been included. Legislations concerning emission standards for medical waste incinerators have been discussed.     

Persistent organic pollutants (POPs) in Caspian seals of unusual mortality event during 2000 and 2001

Persistent organic pollutants including organochlorine pesticides, PCBs, and PCDDs/DFs were determined in the blubber of Caspian seals, which died during an outbreak of canine distemper virus in 2000 and 2001. DDTs were the predominant contaminants that ranged from 3.1 to 560 microg/g lipid. A negative correlation was observed between concentration of contaminants and blubber thickness. During spring, as the blubber layer becomes thin after breeding and moulting, seals may face higher risk due to the increased concentration of organochlorines in their bodies. TEQs in the blubber of Caspian seals (10-340 pg TEQ/g) were lower than those in seals from other locations, suggesting that toxic effects of these contaminants are a deal less in the present population and they are unlikely to be linked to mass mortality. The levels of PCBs and pesticides in Caspian seals, however, comparable to those in other aquatic mammals that have suffered from epizootics, might pose a risk of immunosuppression.     

Determination of PCDDs and PCDFs in different animal feed ingredients

As result of a study to control feedstuff, analyses were carried out to evaluate the contamination caused by PCDDs and PCDFs in different animal feed ingredients. Thirty two samples were selected, including ingredients of animal and mineral origin. For samples of mineral origin, some additives widely employed as binder and anticaking agents, such as bentonite, damoline, kaolin, magnesite, sepiolite and zeolite were selected. And, for ingredients of animal origin, samples of hemoglobin, animal fat, fish oil, fish meal and meat and bone meal were analyzed. The levels ranged from 0.52 to 9.08 pg WHO-TEQ/g fat for samples of animal origin, and from 0.05 to 460.59 pg WHO-TEQ/g for samples of mineral origin. The higher concentrations were observed for the kaolin samples that presented high levels of dioxin contamination.     

A mixture of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and non-ortho polychlorinated biphenyls (PCBs) changed the lipid content of pregnant Long Evans rats

Pregnant Long Evans rats received 1.0 μg/kg of dioxin toxic equivalents (TEQ) by oral gavage on the 15th gestational day (GD 15), using a dosing mixture that contained two polychlorinated dioxins, four polychlorinated furans and three non-ortho polychlorinated biphenyls (PCBs). Rats were sacrificed on GD 16, GD 21 and postnatal day 4 (PND 4). The lipid content of fetus, pup, placenta and maternal liver, serum and adipose tissue were determined. Treated GD 16 and GD 21 fetuses had identical lipid content to the control group, yet the lipid content of treated pups on PND 4 was 32% higher than that of the control group. On the other hand, the lipid content of placenta, liver, and serum from the treated dams was 44–50%, 24%, and 38% lower than that of the control group, respectively. Thus, a low-dose mixture of dioxin-like compounds can cause changes in lipid content. The lipid content of offspring was not affected until they were exposed via lactation.     

Comprehensive study on dioxin contents in binder and anti-caking agent feed additives

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were determined in some additives widely employed as binder and anti-caking agents in feedstuffs, such as kaolin, bentonite, zeolite, etc. with an special attention on sepiolite samples. Owing to their physico-chemical properties, the little information of these materials reported in the literature, the variability of PCDDs/PCDFs found in a preliminary evaluation and the absence of reference materials highlighted further research needed. Therefore, an extensive study on the analytical procedures based on the classical methods was performed with sepiolite samples. The study includes evaluation of reproducibility and repeatibility. To this end, a series of intra-day and nine inter-day analysis were made. The methodolgy was also assessed against the sample size and series of 12.5, 25, 37.5 and 50 g were analyzed. In all cases, the results confirmed good correlation with the parameters evaluated.