硫酸盐还原菌包覆矿石控制酸性废水排放及碳源的优选研究

本研究基于实验室筛选、培养的硫酸盐还原菌(Sulfate-reducing bacteria,简称SRB)菌群,分别考察以麦芽糊精、污泥、乙醇、乳酸钠等为碳源时SRB的生长状况,同时模拟野外环境进行柱淋滤实验,分析在不同碳源作用下原位控制酸性矿山废水的效果.结果表明,采用这4种碳源时,SRB还原硫酸盐能力的大小依次为:...     

农村变电站生活污水处理现状与探讨

我国大部分变电站位于农村地区,因无接入城市污水管网条件,农村变电站生活污水需就地处理后达标排放。变电站生活污水存在水量少、时变化系数大等特点,现有处理工艺不能正常运行或无法达标排放。本文借鉴农村生活污水处理技术,提出了生物组合法处理对策,可为变电站生活污水处理提供参考。     

防渗材料在日本垃圾填埋场的应用

介绍了日本垃圾填埋场防渗系统的构造和防渗材料的分类,以及近年日本各种防渗材料的使用情况。同时作者也结合中国的实际情况提出了适合我国国情的垃圾填埋场防渗系统构造。     

生活垃圾与危险废物焚烧二噁英类排放特征研究

对某省52家焚烧企业(21家生活垃圾和31家危险废物)排放烟气数据进行了分析,结果表明,两类焚烧企业二噁英类17种单体分布有所不同,生活垃圾焚烧烟气中浓度较高的是O8CDD和O8CDF;危险废物焚烧烟气中较大的是2,3,4,7,8-P5CDF、2,3,7,8-T4CDD和1,2,3,7,8-P5CDD;两类焚烧企业二噁英类单体对I-TEQ贡献最高的都是2,3,4,7,8-P5CDF,贡献率分别为0. 7%～45%和10%～67%;两者的17种二噁英类与I-TEQ的相关性分析表明,1,2,3,7,8-P5CDF在2类焚烧炉中与I-TEQ均存在较高的相关性,其相关系数分别0. 932和0. 927,可以作为潜在的测定指示物。     

填埋垃圾腐殖质组成在填埋场稳定度表征中的应用

通过对上海老港生活垃圾填埋场1991-2004年封场单元填埋垃圾腐殖质组成的分析,考察了填埋垃圾中腐殖质组成随填埋龄的变化规律.研究结果表明,填埋垃圾腐殖质的总可提取率和胡敏酸(HA)与富里酸(FA)比值(HA/FA)分别随填埋龄呈线性下降和上升趋势.因此,填埋垃圾总可提取率和HA/FA可用来有效表征填埋场和填埋垃圾稳定度.     

无锡市桃花山生活垃圾填埋场扩建工程渗沥液导排设计

通过分析无锡市桃花山垃圾填埋场原工程渗沥液导排在实际运行中存在的问题,针对当前卫生填埋场的现状,提出扩建工程在原工程和扩建工程和新场渗沥液导排2个关键环节上采取的措施。     

厌氧填埋垃圾降解阶段指标体系的建立

以厌氧填埋场中垃圾的降解过程为依托点,从渗滤液的水质特征和填埋气的组成两个方面筛选出判断指标,最后建立判断填埋垃圾降解阶段的指标体系.结果表明,ρ(BOD5)/ρ(COD)可以反映出渗滤液的可生化性,从而间接反映出填埋垃圾所处的降解阶段,是判断填埋垃圾降解阶段的重要定量指标.     

Challenges to liberalism: The case of Australian energy policy

This paper considers liberal and nationalist economic policy approaches to the ownership and development of Australian energy resources (oil, gas, coal and uranium). In the two decades prior to 1983, Australia pursued economic policies in relation to its energy resources which could broadly be described as ‘nationalist’. Governments of the day intervened in development decisions in an effort to enhance the ‘national interest’. From 1983, along with the deregulation of the Australian economy as a whole, policy relating to energy resources was liberalised. Development of energy reserves henceforth occurred according to the dictates of the market. This paper argues that recent Australian energy policy initiatives reflect an increase in nationalist influences and a retreat from the liberalisation agenda that dominated energy policy making in the 1980s and 1990s. Three examples are discussed where policy has been influenced by a nationalist framework: (1) the domestic gas reservation policy in Western Australia; (2) Australian government efforts to promote a ‘value adding’ nuclear processing industry and (3) Australian Labor Party policy giving preferential financial incentives for gas to liquids projects. The re-emergence of nationalism in Australia is occurring either because policy makers now favour it as a path to energy security or in some cases because they believe that appeals to nationalism will generate political support.     

固相微萃取-气相色谱法测定生活污水中壬基酚

采用固相微萃取-气相色谱法测定生活污水中的壬基酚,优化了萃取纤维涂层材料、萃取时间与温度、解析时间与温度、盐度、pH值、搅拌速度等试验参数。方法在0.001mg／L-1.00mg／L范围内线性良好,检出限为0.0006mg／L,标准溶液平行测定的RSD为7.6％,生活污水加标回收率为42.7％-74.0％。     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.