Development and Validation of the Total HUman Model for Safety (THUMS) Toward Further Understanding of Occupant Injury Mechanisms in Precrash and During Crash

Objective: Active safety devices such as automatic emergency brake (AEB) and precrash seat belt have the potential to accomplish further reduction in the number of the fatalities due to automotive accidents. However, their effectiveness should be investigated by more accurate estimations of their interaction with human bodies. Computational human body models are suitable for investigation, especially considering muscular tone effects on occupant motions and injury outcomes. However, the conventional modeling approaches such as multibody models and detailed finite element (FE) models have advantages and disadvantages in computational costs and injury predictions considering muscular tone effects. The objective of this study is to develop and validate a human body FE model with whole body muscles, which can be used for the detailed investigation of interaction between human bodies and vehicular structures including some safety devices precrash and during a crash with relatively low computational costs.

Methods: In this study, we developed a human body FE model called THUMS (Total HUman Model for Safety) with a body size of 50th percentile adult male (AM50) and a sitting posture. The model has anatomical structures of bones, ligaments, muscles, brain, and internal organs. The total number of elements is 281,260, which would realize relatively low computational costs. Deformable material models were assigned to all body parts. The muscle–tendon complexes were modeled by truss elements with Hill-type muscle material and seat belt elements with tension-only material. The THUMS was validated against 35 series of cadaver or volunteer test data on frontal, lateral, and rear impacts. Model validations for 15 series of cadaver test data associated with frontal impacts are presented in this article. The THUMS with a vehicle sled model was applied to investigate effects of muscle activations on occupant kinematics and injury outcomes in specific frontal impact situations with AEB.

Results and Conclusions: In the validations using 5 series of cadaver test data, force–time curves predicted by the THUMS were quantitatively evaluated using correlation and analysis (CORA), which showed good or acceptable agreement with cadaver test data in most cases. The investigation of muscular effects showed that muscle activation levels and timing had significant effects on occupant kinematics and injury outcomes. Although further studies on accident injury reconstruction are needed, the THUMS has the potential for predictions of occupant kinematics and injury outcomes considering muscular tone effects with relatively low computational costs.     

The Contribution of Pre-impact Posture on Restrained Occupant Finite Element Model Response in Frontal Impact

Objective: The objective of this study was to discuss the influence of the pre-impact posture to the response of a finite element human body model (HBM) in frontal impacts.

Methods: This study uses previously published cadaveric tests (PMHS), which measured six realistic pre-impact postures. Seven postured models were created from the THUMS occupant model (v4.0): one matching the standard UMTRI driving posture as it was the target posture in the experiments, and six matching the measured pre-impact postures. The same measurements as those obtained during the cadaveric tests were calculated from the simulations, and biofidelity metrics based on signals correlation (CORA) were established to compare the response of the seven models to the experiments.

Results: The HBM responses showed good agreement with the PMHS responses for the reaction forces (CORA = 0.80 ± 0.05) and the kinematics of the lower part of the torso but only fair correlation was found with the head, the upper spine, rib strains (CORA= 0.50 ± 0.05) and chest deflections (CORA = 0.67 ± 0.08). All models sustained rib fractures, sternal fracture and clavicle fracture. The average number of rib fractures for all the models was 5.3 ± 1.0, lower than in the experiments (10.8 ± 9.0).

Variation in pre-impact posture greatly altered the time histories of the reaction forces, deflections and the rib strains, mainly in terms of time delay, but no definite improvement in HBM response or injury prediction was observed. By modifying only the posture of the HBM, the variability in the impact response was found to be equivalent to that observed in the experiments. The postured HBM sustained from 4 to 8 rib fractures, confirming that the pre-impact posture influenced the injury outcome predicted by the simulation.

Conclusions: This study tries to answer an important question: what is the effect of occupant posture on kinematics and kinetics. Significant differences in kinematics observed between HBM and PMHS suggesting more coupling between the pelvis and the spine for the models which makes the model response very sensitive to any variation in the spine posture. Consequently, the findings observed for the HBM cannot be extended to PMHS. Besides, pre-impact posture should be carefully quantified during experiments and the evaluation of HBM should take into account the variation in the predicted impact response due to the variation in the model posture.     

Spatial allocation of material flow analysis in residential developments: a case study of Kildare County,Ireland

Studies of urban metabolism provide important insights for environmental management of cities, but are not widely used in planning practice due to a mismatch of data scale and coverage. This paper introduces the Spatial Allocation of Material Flow Analysis (SAMFA) model as a potential decision support tool aimed as a contribution to overcome some of these difficulties and describes its pilot use at the county level in the Republic of Ireland. The results suggest that SAMFA is capable of identifying hotspots of higher material and energy use to support targeted planning initiatives, while its ability to visualise different policy scenarios supports more effective multi-stakeholder engagement. The paper evaluates this pilot use and sets out how this model can act as an analytical platform for the industrial ecology–spatial planning nexus.     

A new approach to determine relieving temperature and thermodynamic behavior of trapped single and multi-phase fluid exposed to fire

Process safety plays a key role in modern industries. This is more significant specifically in off-shore oil and gas platforms where releasing hydrocarbons could cause irreversible damages to both environment and personnel. An important instrument device which can provide safety for process equipment in oil and gas fields is safety relief valve. Correct sizing procedure of such devices depends strongly on physical properties of fluid and relieving condition. The present study revolved around applying thermodynamic concepts and modeling to throw some light on the behavior of trapped fluid exposed to fire in order to evaluate precise temperature and fluid properties at relieving condition. Peng–Robinson equation of state together with a three phase flash has been utilized to handle the calculation. Effect of different design parameters has been evaluated for three distinct categories of fluids namely natural gas, gas-condensate mixture, and gas-oil mixtures. These parameters encompass of operating temperature, operating pressure, Difference of Operating and Design Pressure, gas and oil specific gravities, gas-oil ratio, and water cut. The study depicted that American Petroleum Institute practice number 521 which suggests an ideal gas assumption fails to provide reliable predictions as it significantly overestimate the relieving temperature. Moreover, black oil correlations were also used for the relief temperature estimation of gas-oil-water mixtures. Comparison with HYSYS results as a prominent engineering software proved that black oil models are reliable tools to predict relief temperature.     

A Modeling System to Assess Land Cover Land Use Change Effects on SAV Habitat in the Mobile Bay Estuary

Estuarine ecosystems are largely influenced by watersheds directly connected to them. In the Mobile Bay, Alabama watersheds we examined the effect of land cover and land use (LCLU) changes on discharge rate, water properties, and submerged aquatic vegetation, including freshwater macrophytes and seagrasses, throughout the estuary. LCLU scenarios from 1948, 1992, 2001, and 2030 were used to influence watershed and hydrodynamic models and evaluate the impact of LCLU change on shallow aquatic ecosystems. Overall, our modeling results found that LCLU changes increased freshwater flows into Mobile Bay altering temperature, salinity, and total suspended sediments (TSS). Increased urban land uses coupled with decreased agricultural/pasture lands reduced TSS in the water column. However, increased urbanization or agricultural/pasture land coupled with decreased forest land resulted in higher TSS concentrations. Higher sediment loads were usually strongly correlated with higher TSS levels, except in areas where a large extent of wetlands retained sediment discharged during rainfall events. The modeling results indicated improved water clarity in the shallow aquatic regions of Mississippi Sound and degraded water clarity in the Wolf Bay estuary. This integrated modeling approach will provide new knowledge and tools for coastal resource managers to manage shallow aquatic habitats that provide critical ecosystem services.     

Development of the Spatial Rainfall Generator (SRGEN) for the Agricultural Policy/Environmental Extender Model

Accurate spatial representation of climatic patterns is often a challenge in modeling biophysical processes at the watershed scale, especially where the representation of a spatial gradient in rainfall is not sufficiently captured by the number of weather stations. The spatial rainfall generator (SRGEN) is developed as an extension of the “weather generator” (WXGEN), a component of the Agricultural Policy/Environmental eXtender (APEX) model. SRGEN generates spatially distributed daily rainfall using monthly weather statistics available at multiple locations in a watershed. The spatial rainfall generator as incorporated in APEX is tested on the Cowhouse watershed (1,178 km²) in central Texas. The watershed presented a significant spatial rainfall gradient of 2.9 mm/km in the lateral (north‐south) directions based on four rainfall gages. A comparative analysis between SRGEN and WXGEN indicates that SRGEN performs well (PBIAS = 2.40%). Good results were obtained from APEX for streamflow (NSE = 0.99, PBIAS = 8.34%) and NO₃‐N and soluble P loads (PBIAS ≈ 6.00% for each, respectively). However, APEX underpredicted sediment yield and organic N and P loads (PBIAS: 24.75‐27.90%) with SRGEN, although its uncertainty in output was lower than WXGEN results (PBIAS: ?13.02 to ?46.13%). The overall improvement achieved in rainfall generation by SRGEN is demonstrated to be effective in the improving model performance on flow and water quality output.     

亚热带丘陵小流域土壤有效磷空间变异与淋失风险研究

肥料过施导致的土壤磷素累积和淋失是农业面源污染的重要方面.以湖南省长沙县金井镇脱甲河小流域(52 km2)为研究区,采用高密度布点采样、Arc GIS软件和属性相似反距离加权插值法研究了亚热带丘陵小流域表层(0~20 cm)土壤有效磷(Olsen-P)含量(以P计,下同)的空间分布特征与磷素的淋失风险.结果表明,菜地、果园、稻田和茶园土壤Olsen-P平均含量为62.0、16.1、14.4和13.7 mg·kg-1,是林地(平均含量为2.36 mg·kg-1)的5.8~26.3倍.5个土地利用类型土壤Olsen-P含量均具有高等变异水平和中等程度的空间自相关性(块基比C0/(C0+C)=50%),这与区内地形地貌、土壤母质、人工施肥等具有密切关系.根据土壤0.01 mol·L-1Ca Cl2浸提态P和Olsen-P的非线性关系可确定区内红壤和水稻土P的淋失风险临界值分别为69.97和98.40 mg·kg-1,并据此对脱甲河小流域土壤磷素淋失的风险进行了定量评价,结果表明旱地土壤具有明显较高的淋失风险,其中中等以上的比例占36.4%,而稻田土壤仅有0.2%,为中等以上淋失风险.因此,控制旱地(尤其是菜地)磷肥的投入是降低亚热带丘陵小流域土壤P淋失风险和减轻农业面源污染的关键.     

东江流域表层土中全氟化合物的空间分布及来源解析

为探究东江流域土壤中全氟化合物(perfluorinated compounds,PFCs)分布特征和潜在来源,2013年8月采集东江流域19份表层土样品,利用高效液相色谱-串联质谱联用(HPLC-MS/MS)技术分析了16种PFCs的含量。结果表明,东江流域表层土总PFCs(∑PFCs)含量范围在2.15~5.49μg/kg dw。所采集的表层土样品中,东江东莞段土壤∑PFCs含量明显高于惠州段,全氟辛烷磺酸(0.65~1.28μg/kg dw)为最主要的污染物。与国内相关研究数据相比,东江流域土壤PFCs含量水平整体较高,这可能与流域产业结构和经济活动有关。主成分分析结果表明,电镀防雾剂、食品包装和全氟羧酸的生产过程、大气沉降、电化学氟化过程为东江流域土壤中PFCs的主要来源。与土壤有机质含量相关性研究表明,PFCs更容易分配到有机质含量高的土壤中,且随着PFCs分子碳链的增加,这种趋势更加显著。     

西南地区近14a植被覆盖变化及其与气候因子的关系

基于1999~2012年NDVI数据,结合气温和降水资料,运用GIS和RS技术,分析了西南地区近14a植被覆盖的时空变化特征及与气温、降水的关系。结果表明:(1)该区植被生长良好,各植被类型NDVI均呈显著增加趋势。空间整体表现为改善状态,改善面积远大于退化面积,严重退化区仅占1.18%。退化区分布于横断山地北部、四川盆地东部以及云贵高原中部。(2)植被覆盖变化将以良性发展为主,但强持续性的退化区和弱持续性的改善区应值得关注;强持续性的退化区主要分布在横断山地中北部、云贵高原中西部、若尔盖高原中部、四川盆地与若尔盖高原相交区域;草原强持续性的退化面积最大,针阔混交林强持续性的改善面积最大。(3)NDVI与温度存在明显的正相关关系,而与降水及干旱指数变化的关系不太明显,温度是影响该区植被变化的主要自然因素。     

1990年以来长江三角洲耕地资源变化及驱动因子研究

长江三角洲地区是中国经济发展最为快速的地区之一,虽耕地资源秉赋较好,但在经济快速发展的背景下,耕地问题显得十分严峻。以长江三角洲地区16个地级市为研究对象,利用1990~2012年相关数据,以市域为单元分析了耕地资源变化和实际利用强度的时空演变过程。结果表明:(1)1990~2012年,长三角地区的耕地总面积和人均耕地面积呈现周期性的下降趋势,以"快-慢-快-慢-慢"的循环模式逐步降低;(2)长三角地区耕地实际利用强度大体呈现"北强南弱"分布规律,在空间表现上,原来集中连片的 "高-高"、"低-低"格局正逐渐破碎化,开始出现斑点镶嵌式格局;(3)长三角地区的人口、二三产业比重和城市化水平均对耕地面积变化起到显著作用,其弹性系数分别为-0.216、-0.194和-0.203,而人均GDP与耕地面积则没有显著相关性。