农药企业搬迁土地挥发性有机物风险评价

对常州某农药生产场地土壤中挥发性有机物(VOCs)污染状况以及健康风险和生态风险进行了调查评价。结果表明,该场地土壤中挥发性有机物污染以苯系物和卤代烃为主。苯系物质量浓度为0~56.6 mg/kg,卤代烃质量浓度为0~1.14 mg/kg。健康风险评价结果均在可接受范围内,而生态风险评价显示生产车间内的土壤VOCs生态风险较大,存在着对生物的危害。     

生态补水对玄武湖水质的影响

分析南京玄武湖1997年-2010年的水质变化,以及生态补水与玄武湖水质变化的关系。结果表明,玄武湖于1998年实施生态补水,随着生态补水的持续运行和生态补水量的不断增加,玄武湖水质得以显著改善,其水质类别由生态补水前的劣V类水体转为V类水体,并接近于Ⅳ类水体,富营养化程度由重度富营养化水平转为轻度富营养化水平。目前玄武湖主要营养物质来源于生态补水,相关性分析显示各湖区TN浓度与生态补水中TN浓度呈显著相关关系。     

Perceived mastery climate,felt trust,and knowledge sharing

Interpersonal trust is associated with a range of adaptive outcomes, including knowledge sharing. However, to date, our knowledge of antecedents and consequences of employees feeling trusted by supervisors in organizations remains limited. On the basis of a multisource, multiwave field study among 956 employees from 5 Norwegian organizations, we examined the predictive roles of perceived mastery climate and employee felt trust for employees' knowledge sharing. Drawing on the achievement goal theory, we develop and test a model to demonstrate that when employees perceive a mastery climate, they are more likely to feel trusted by their supervisors at both the individual and group levels. Moreover, the relationship between employees' perceptions of a mastery climate and supervisor‐rated knowledge sharing is mediated by perceptions of being trusted by the supervisor. Theoretical contributions and practical implications of our findings are discussed.     

Evaluation of geometrically personalized THUMS pedestrian model response against sedan–pedestrian PMHS impact test data

Objective: Evaluating the biofidelity of pedestrian finite element models (PFEM) using postmortem human subjects (PMHS) is a challenge because differences in anthropometry between PMHS and PFEM could limit a model's capability to accurately capture cadaveric responses. Geometrical personalization via morphing can modify the PFEM geometry to match the specific PMHS anthropometry, which could alleviate this issue. In this study, the Total Human Model for Safety (THUMS) PFEM (Ver 4.01) was compared to the cadaveric response in vehicle–pedestrian impacts using geometrically personalized models.

Methods: The AM50 THUMS PFEM was used as the baseline model, and 2 morphed PFEM were created to the anthropometric specifications of 2 obese PMHS used in a previous pedestrian impact study with a mid-size sedan. The same measurements as those obtained during the PMHS tests were calculated from the simulations (kinematics, accelerations, strains), and biofidelity metrics based on signals correlation (correlation and analysis, CORA) were established to compare the response of the models to the experiments. Injury outcomes were predicted deterministically (through strain-based threshold) and probabilistically (with injury risk functions) and compared with the injuries reported in the necropsy.

Results: The baseline model could not accurately capture all aspects of the PMHS kinematics, strain, and injury risks, whereas the morphed models reproduced biofidelic response in terms of trajectory (CORA score = 0.927 ± 0.092), velocities (0.975 ± 0.027), accelerations (0.862 ± 0.072), and strains (0.707 ± 0.143). The personalized THUMS models also generally predicted injuries consistent with those identified during posttest autopsy.

Conclusions: The study highlights the need to control for pedestrian anthropometry when validating pedestrian human body models against PMHS data. The information provided in the current study could be useful for improving model biofidelity for vehicle–pedestrian impact scenarios.     

Hot,Salty Water: A Confluence of Issues in Managing Stormwater Runoff for Urban Streams

Research increasingly highlights cause and effect relationships between urbanization and stream conditions are complex and highly variable across physical and biological regions. Research also demonstrates stormwater runoff is a key causal agent in altering stream conditions in urban settings. More specifically, thermal pollution and high salt levels are two consequences of urbanization and subsequent runoff. This study describes a demonstration model populated with data from a high gradient headwaters stream. The model was designed to explain surface water‐groundwater dynamics related to salinity and thermal pollution. Modeled scenarios show long‐term additive impacts from salt application and suggest reducing flow rates, as stormwater management practices are typically designed to do, have the potential to greatly reduce salt concentrations and simultaneously reduce thermal pollution. This demonstration model offers planners and managers reason to be confident that stormwater management efforts can have positive impacts.     

Probabilistic Flood Inundation Forecasting Using Rating Curve Libraries

One approach for performing uncertainty assessment in flood inundation modeling is to use an ensemble of models with different conceptualizations, parameters, and initial and boundary conditions that capture the factors contributing to uncertainty. However, the high computational expense of many hydraulic models renders their use impractical for ensemble forecasting. To address this challenge, we developed a rating curve library method for flood inundation forecasting. This method involves pre‐running a hydraulic model using multiple inflows and extracting rating curves, which prescribe a relation between streamflow and stage at various cross sections along a river reach. For a given streamflow, flood stage at each cross section is interpolated from the pre‐computed rating curve library to delineate flood inundation depths and extents at a lower computational cost. In this article, we describe the workflow for our rating curve library method and the Rating Curve based Automatic Flood Forecasting (RCAFF) software that automates this workflow. We also investigate the feasibility of using this method to transform ensemble streamflow forecasts into local, probabilistic flood inundation delineations for the Onion and Shoal Creeks in Austin, Texas. While our results show water surface elevations from RCAFF are comparable to those from the hydraulic models, the ensemble streamflow forecasts used as inputs to RCAFF are the largest source of uncertainty in predicting observed floods.     

Constraining SWAT Calibration with Remotely Sensed Evapotranspiration Data

Historically, many watershed studies have been based on using the streamflow flux, typically from a single gauge at the basin's outlet, to support calibration. In this setting, there is great potential for equifinality of parameters during the optimization process, especially for parameters that are not directly related to streamflow. Therefore, some of the optimal parameter values achieved during the autocalibration process may be physically unrealistic. In recent decades a vast array of data from land surface models and remote sensing platforms can help to constrain hydrologic fluxes such as evapotranspiration (ET). While the spatial resolution of these ancillary datasets varies, the continuous spatial coverage of these gridded datasets provides flux measurements across the entire basin, in stark contrast to point‐based streamflow data. This study uses Global Land Evaporation: the Amsterdam Model data to constrain Soil and Water Assessment Tool parameter values associated with ET to a more physically realistic range. The study area is the Little Washita River Experimental Watershed, in southern Oklahoma. Traditional objective metrics such as the Nash‐Sutcliffe coefficients record no performance improvement after application of this method. However, there is a dramatic increase in the number of days with receding flow where simulations match observed streamflow.     

Does the Temporal Resolution of Precipitation Input Influence the Simulated Hydrological Components Employing the SWAT Model?

This study aimed to evaluate the influence of sub‐daily precipitation time steps on model performance and hydrological components by applying the Green and Ampt infiltration method using the Soil and Water Assessment Tool (SWAT). Precipitation was measured at a resolution of 0.1 mm and aggregated to 5‐, 15‐, 30‐, and 60‐min time steps. Daily discharge data over a 10‐year period were used to calibrate and validate the model. Following a global sensitivity analysis, relevant parameters were optimized through an automatic calibration procedure using SWAT‐CUP for each time step. Daily performance statistics were almost equal among all four time steps (NSE ≈ 0.47). Discharge mainly consisted of groundwater flow (55%) and tile flow (42%), in reasonable proportions for the investigated catchment. In conclusion, model outputs were almost identical, showing simulations responded nearly independently of the chosen precipitation time step. This held true for (1) the selection of sensitive parameters, (2) performance statistics, (3) the shape of the hydrographs, and (4) flow components. However, a scenario analysis revealed that the precipitation time step becomes important when saturated hydraulic conductivities are low and curve numbers are high. The study suggests that there is no need in using precipitation time steps <1 h for lowland catchments dominated by soils with a low surface runoff potential if daily flow values are being considered. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

基于生态位理论的京津冀城市生态文明评价

生态文明评价体系是明确生态文明建设现状、定位生态文明建设存在问题的关键。从城市群视角出发引入生态位理论,界定生态文明位内涵,构建涵盖社会子系统生态位—经济子系统生态位—资源环境子系统生态位共29项指标的城市生态文明评价指标体系,并提出相对生态文明位和生态经济指数的二维模型,测算京津冀城市群6个案例城市在2007—2011年的生态文明建设水平、趋势以及地位。结果显示,2011年北京生态文明水平(相对生态文明位)最高,邢台生态文明水平最低,石家庄、秦皇岛、承德、天津生态文明水平分别排名第2、第3、第4、第5。2007—2011年,北京、承德、邢台生态文明水平呈现波动下降趋势,而秦皇岛、石家庄、天津呈现小幅上升趋势;但生态经济指数测算显示,北京的经济社会发展对于生态资源环境的占用消耗大,承德有较好的经济发展潜力。并基于该二维模型,将京津冀城市生态文明建设分为4种类型:发展失衡型、相对和谐型、高质量发展型、资源环境优势型,分别确定城市生态文明建设重点,为京津冀协同发展提供了指导依据。     

Effects of signals of disorder on fear of crime in real and virtual environments

Despite the fact that virtual environments are increasingly deployed to study the relation between urban planning, physical and social disorder, and fear of crime, their ecological validity for this type of research has not been established. This study compares the effects of similar signs of public disorder (litter, warning signs, cameras, signs of vandalism and car burglary) in an urban neighborhood and in its virtual counterpart on the subjective perception of safety and livability of the neighborhood. Participants made a walking tour through either the real or the virtual neighborhood, which was either in an orderly (baseline) state or adorned with numerous signs of public disorder. During their tour they reported the signs of disorder they noticed and the degree to which each of these affected their emotional state and feelings of personal safety. After finishing their tour they appraised the perceived safety and livability of the environment. Both in the real and in the simulated urban neighborhood, signs of disorder evoked associations with social disorder. In all conditions, neglected greenery was spontaneously reported as a sign of disorder. Disorder did not inspire concern for personal safety in reality and in the virtual environment with a realistic soundscape. However, in the absence of sound disorder compromised perceived personal safety in the virtual environment. Signs of disorder were associated with negative emotions more frequently in the virtual environment than in its real-world counterpart, particularly in the absence of sound. Also, signs of disorder degraded the perceived livability of the virtual, but not of the real neighborhood. Hence, it appears that people focus more on details in a virtual environment than in reality. We conclude that both a correction for this focusing effect and realistic soundscapes are required to make virtual environments an appropriate medium for both etiological (e.g. the effects of signs of disorder on fear of crime) and intervention (e.g. CPTED) research.