Impacts of natural weathering on the transformation/neoformation processes in landfilled MSWI bottom ash: a geoenvironmental perspective

Natural weathering processes are significant mechanisms that noticeably affect the fundamental nature of incineration ash residues. To provide a greater understanding of these processes, a MSWI (mono)landfill site in the north east of the US was selected as the target for systematic investigation of the natural weathering of bottom ash residues. Samples of various ages were collected from locations A (1 yr), B (10 yrs), C (13-14 yrs) and D (20 yrs) of the landfill in 2009. We investigated the phase transformation of the collected bottom ash particles, neoformation processes as well as the behavior and distribution of certain heavy metals (Cu, Pb, Zn, Ni, and Cr) in the neoformed phases using optical microscopy, SEM-EDX, and bulk examinations. Key findings: at the preliminary stage, the waste metallic particles (Al, Fe, and Cu) and unstable minerals such as lime, portlandite, ettringite and hydrocalumite convert to oxide and hydroxide (hydrate) phases, calcite, alumina gel and gypsum. At the intermediate stage, the decomposition of melt products including magnetite spinels and metallic inclusions is triggered due to the partial dissolution of the melt glass. At the longer time horizon it is possible to track the breakdown of the glass phase, the extensive formation of calcite and anhydrite, Al-hydrates and more stable Fe-hydrates all through the older ash deposits. Among the dominant secondary phases, we propose the following order based on their direct metal uptake capacity: Fe-hydrates>Al-hydrates>calcite. Calcite was found to be the least effective phase for the direct sorption of heavy metals. Based on overall findings, a model is proposed that demonstrates the general trend of ash weathering in the landfill.     

玉米多胞质系线粒体数量和结构特征的比较分析

以玉米多胞质系为材料,采用透射电镜的观察方法,比较观察了１１种材料中黄化幼芽细胞的线粒体结构特征的变化．观察表明,１１种材料黄化幼芽线粒体形态及外膜、内膜、泡状嵴和基质颗粒等没有什么显著的差异,而线粒体大小和每个细胞内的线粒体数量却是明显不同的．Ｆ检验说明,线粒体大小和每个细胞线粒体数量上有极显著的差异,也即是说,１１种不同细胞质类型的材料细胞质作用和核质（基因）互作是明显的．试验还观察到线粒体、分裂现象和线粒体、淀粉粒聚集在胞间连丝附近的有趣现象．     

北京西北城区与清洁对照点夏季大气PM10的微观特征及粒度分布

应用高分辨率场发射扫描电镜(FESEM)和图像分析技术研究了北京西北城区和清洁对照点非取暖期(2001年夏季)大气单个颗粒物的形貌特征以及PM₁₀和PM_2.5的数量-粒度和体积-粒度分布.研究表明,烟尘集合体在2个采样点都普遍存在,具有区域性污染的特征;不规则状矿物颗粒物多见于市区PM₁₀样品中,而长条状石膏颗粒多出现在清洁对照点颗粒物样品中;在清洁对照点还观察到了生物质颗粒.PM₁₀的数量-粒度分布呈双峰分布,主峰为0.2～0.5μm,次峰为在1～2.5μm但PM₁₀的体积-粒度分布呈单峰分布,在1～2.5μm粒度范围内.综合分析得出,虽然粗颗粒,主要是矿物颗粒,在数量上对PM₁₀贡献很小,但是对总体积,因此对总质量的贡献可能很大但在PM_2.5中,烟尘集合体在数量和体积上均占优势.     

Laser cleaning of historical limestone buildings in Bordeaux appraisal using cathodoluminescence and electron paramagnetic resonance

BACKGROUND: Most historical buildings in Bordeaux city are made of limestone. This yellowish-white rock is rather porous and highly sensitive to pollution. As a consequence of local weathering conditions, these buildings present a dark appearance due to the development of a superficial dark grey to black crust. METHODS: For the last decade, a campaign has been underway to clean these buildings. Eleven techniques of surface treatment have been used, including laser beam technology. As a contribution to the study of laser beam effects on stone buildings, two analytical methods have been used on clean versus unclean surfaces: Cathodoluminescence (CL) and Electron Paramagnetic Resonance (EPR), in addition to SEM-EDX and XRD. RESULTS: The black crust is composed of different types of particles: carbon porous micro-particles of industrial origin, atmospheric dust due to the erosion of soils and rocks, alumino-silicate particles from urban pollution; all these particles being cemented by gypsum. DISCUSSION: As far as heritage conservation is concerned, the laser surface treatment not only preserves the original patina of the stone, but also leaves surface smoothness unaltered. CONCLUSIONS AND PERSPECTIVES: CL and EPR data confirm that lasers--with highly controlled parameters--only get rid of the black crust and, thus, reveal the underneath layer, the so-called patina. This patina shows no luminescence, whereas the limestone on which it has grown shows a bright orange emission of CL. This indicates CL to be a fast and easy way to provide a high quality control for the restoration of polluted ancient stones.     

Biomonitoring of the distribution of dust emissions by means of a new SEM/EDX technique

A new application of the Scanning Electron Microscope (SEM) equipped with an Energy Dispersive X-ray Microanalyzer (EDX) has been developed to study the distribution of airborne dust emissions. This technique makes it possible to identify the particles and measure the amount of dust deposition on the surface of the biomonitoring material. Pine bark or needles and moss can easily be used as the study material. A map indicating pollution levels and distribution can be drawn on the basis of the measured data.     

Ambient monitoring of asbestos in selected Italian living areas

This paper presents the results of an intensive monitoring activity of the particulate, fall-out and soil of selected living areas in Italy with the aim to detect the asbestos concentration in air and subsequent risk of exposure for the population in ambient living environments, and to assess the nature of the other mineral phases composing the particulate matrix. Some areas were sorted out because of the presence of asbestos containing materials on site whereas others were used as blank spots in the attempt to detect the background environmental concentration of asbestos in air. Because the concentration of asbestos in ambient environments is presumably very low, and it is well known that conventional low–medium flow sampling systems with filters of small diameter (25 mm) may collect only a very small fraction of particulate over a short period, for the first time here, an intense monitoring activity was conducted with a high flow sampling system. The high flow system requires the use of large cellulose filters with the advantage that, increasing the amount of collected dust, the probability to collect asbestos fibers increases. Both the protocol of monitoring and analysis are novel and prompted by the need to increase the sensitivity towards the small number of expected fibers. With this goal, the collection of fall-out samples (the particulate falling into a collector filled with distilled water during the monitoring shift) and soil samples was also accomplished. The analytical protocol of the matrix particulate included preliminary X-ray powder diffraction (XRPD), optical microscopy and quantitative electron microscopy (SEM and TEM). Correlations with climatic trends and PM10 concentration data were also attempted.The surprising outcome of this work is that, despite the nature of the investigated site, the amount of dispersed asbestos fibers is very low and invariably lower than the theoretical method detection limits of the SEM and TEM techniques for identification and counting of asbestos fibers. The results are compared to the literature data worldwide and an updated model for asbestos fibers dispersion in ambient environments is proposed.     

Optimization of the ionization conditions for the trace analysis of PCDD/PCDF with ion trap MS/MS

Commercial ion trap mass spectrometer provides easy-to-operate MS/MS analysis for the determination of PCDD/PCDF. The limit of quantification is appropriately low (0.2 pg for 23478-P5CDF) because all the stages are performed in the trap and sample losses associated with the ion transportation are minimized. However, if excessive ions are injected into the trap, its electrical fields are distorted and an overall reduction in performance arises. Ionization condition is an important parameter as it affects the amount of the total ions produced. If the amount of interfering compounds are negligible, such as standard solution or cleaned-up sample, lower ionization condition (e.g. electron energy: 30 eV, emission current (EC): 150 μA) is preferable. On the contrary, in case excessive interfering ions are coexisting with PCDD/PCDF, such as crude extract or semi-cleaned-up sample, the ionization condition should be high (e.g. electron energy: 90 eV, EC: 350 μA) for the reproductive quantification.     

Differences in volatile methyl siloxane (VMS) profiles in biogas from landfills and anaerobic digesters and energetics of VMS transformations

The objectives of this study were to compare the types and levels of volatile methyl siloxanes (VMS) present in biogas generated in the anaerobic digesters and landfills, evaluate the energetics of siloxane transformations under anaerobic conditions, compare the conditions in anaerobic digesters and municipal solid waste (MSW) landfills which result in differences in siloxane compositions. Biogas samples were collected at the South District Wastewater Treatment Plant and South Dade Landfill in Miami, Florida. In the digester gas, D4 and D5 comprised the bulk of total siloxanes (62% and 27%, respectively) whereas in the landfill gas, the bulk of siloxanes were trimethylsilanol (TMSOH) (58%) followed by D4 (17%). Presence of high levels of TMSOH in the landfill gas indicates that methane utilization may be a possible reaction mechanism for TMSOH formation. The free energy change for transformation of D5 and D4 to TMSOH either by hydrogen or methane utilization are thermodynamically favorable. Either hydrogen or methane should be present at relatively high concentrations for TMSOH formation which explains the high levels present in the landfill gas. The high bond energy and bond distance of the Si–O bond, in view of the atomic sizes of Si and O atoms, indicate that Si atoms can provide a barrier, making it difficult to break the Si–O bonds especially for molecules with specific geometric configurations such as D4 and D5 where oxygen atoms are positioned inside the frame formed by the large Si atoms which are surrounded by the methyl groups.     

Heavy Metals in Moss and Bark From Urban Area of Florence: A New Cleaness Procedure for Removing Superficial Particulate Matter

Hypnum cupressiforme epiphytic moss and tree bark (elm and holm oak) samples have been collected in three sites of the city of Florence in the period 1995-1998. Lead, zinc, copper, and cadmium were determined by differential pulse anodic stripping voltammetry (DPASV) in about 200 samples collected at different heights above ground. A new clean-up procedure by nitrogen jet has been followed and its efficiency has been also verified by electron microscopy (SEM and ESEM techniques). Lead median contents in moss and bark samples fall within the ranges of 0.052-0.86 and 0.20-1.30 μmoles g^-1 (dry weight), resulting values for moss and bark are proportional to the vehicular traffic density. the increasing use of lead-free gasoline has not been followed by a decrease of lead moss concentration.     

New tabletop SEM-EDS-based approach for cost-efficient monitoring of airborne particulate matter

Recent developments in scanning electron microscopy (SEM) have produced tabletop instruments capable of reasonable imaging resolution at less cost compared to conventional equipment. Combining the SEM with energy dispersive spectroscopy (EDS) allows the possibility of elemental analysis through detection of X-rays emitted from interaction between individual particles and the SEM electron beam, revealing their atomic composition. It’s well known that exposure to inhalable particulate matter (PM) poses health risks and routine monitoring of the chemical content of these has been realized. Exposure information is of a general character but by combining the chemical build-up of monitored particles and knowledge of their inherent health effects will allow better risk assessment. An analysis technique using a tabletop SEM with EDS is demonstrated on particles collected onto nucleopore filters from urban, industrial and rural areas. Detailed characterization of the instruments analysis capabilities as applied to PM are described.