氧化塘合理的设计与操作

氧化塘不但可以低费用的降解废水，而且可以提供有用的生物量，其关键是进行合理的设计、操作和去除污泥．本文综合国外的文献资料，提出合理的设计和操作方案，并且引用国外试验者开发的预测模型；同时提出操作过程加入适当的ＣａＣｌ２化学添加剂可以促进藻类生物量的絮凝，以保证出水的质量和提供可利用的生物量．     

Graphical strategies for design of evaporation crystallization networks for environmental wastewater applications

This paper introduces graphical strategies for the design of an evaporation/crystallization network for ternary wastewater environmental applications. Sources, sinks and other streams are located on a ternary composition diagram. While a source is any wastewater stream that has the potential to be recycled, a sink is any unit in the process that can accept sources. The proposed methodology is extremely simple to understand and implement, as it only requires basic solid-liquid phase equilibria data and uses lever arm principles to generate alternative process designs. Geometric constructions are carried out on the ternary composition diagram and the respective lever arms are used to determine intermediate flow rates in the evaporation/crystallization network. The relative locations and flow rates of the sources and sinks under consideration, as well as the unique shape of the solid-liquid equilibrium, drive the design of the separation (via evaporation/crystallization) network. Some generic structures are proposed for a typical evaporation and crystallization network. Once the general problem statement has been defined, special cases consisting of a single source-single sink, single source-two sinks and two sources-single sink are described. These special cases are representative of commonly occurring industrial wastewater design problems. Several graphical insights are listed that allow one to represent evaporation and crystallization operations on a ternary triangular composition diagram and avoid mathematical complexity. The possibility of bypassing a part of the initial feed streams is also considered. Certain feasible composition regions are identified on the ternary composition diagram for cases dealing with multiple sources and sinks. The methodology is useful in pre-screening and eliminating certain sources/sinks and is readily applicable to cases with lower number of sources and sinks. A case study involving the ammonium nitrate manufacturing process is included to demonstrate the broad applicability and value of the proposed approach.     

A framework to assess regional environmental impacts of dedicated energy crop production

Numerous studies have evaluated air quality and greenhouse gas mitigation benefits of biomass energy systems, but the potential environmental impacts associated with large-scale changes in land-use patterns needed to produce energy crops have not been quantified. This paper presents a framework to assess the potential soil, water, and biodiversity impacts that may result from the large-scale production of dedicated energy crops. The framework incorporates producer economic decision models with environmental models to assess changes in land use patterns and to quantify the consequent environmental impacts. Economic and policy issues that will affect decisions to produce energy crops are discussed. The framework is used to evaluate erosion and chemical runoff in two Tennessee regions. The analysis shows that production of dedicated energy crops in place of conventional crops will significantly reduce erosion and chemical runoff.     

近断层地震动考虑能量损伤效应的非弹性强度需求

由于靠近断层处地震地面运动中速度脉冲作用的存在,导致传统的基于瞬时加速度反应谱的抗震设计,不能有效考虑由此带来的巨大能量耗散和位移需求。笔者采用代表性的脉冲型实际近场地震记录和人工模拟三角函数地震动时程,在分析累积输入地震动耗能和结构位移间关系基础上,提出了等效速度比的表达式;给出了近场地震动的等效变形需求表达式;提出了等价延性系数的概念,来考虑由于地震动能量耗散对结构的强度需求;经非线性时程分析方法对其稳定性进行了验证比较,有利于增强结构的安全性。     

Indicators for sustainable energy development in Lithuania

This article summarizes some of the results from the application of the indicators for sustainable energy development (ISED) tool for analyzing Lithuania's energy sector, in terms of trends, setting energy policy goals and monitoring progress towards these goals. This experience illustrates the potential applicability of the ISED methodology for energy policy development in economies in transition, using Lithuania as an example. The article presents a summary of the results achieved and conclusions arrived at from the analysis of six priority areas in the context of the research project coordinated by the International Atomic Energy Agency, and provides recommendations for the development of sustainable energy policy using the ISED approach.     

Combined Municipal Solid Waste and biomass system optimization for district energy applications

Municipal Solid Waste (MSW) disposal has been a controversial issue in many countries over the past years, due to disagreement among the various stakeholders on the waste management policies and technologies to be adopted. One of the ways of treating/disposing MSW is energy recovery, as waste is considered to contain a considerable amount of bio-waste and therefore can lead to renewable energy production. The overall efficiency can be very high in the cases of co-generation or tri-generation. In this paper a model is presented, aiming to support decision makers in issues relating to Municipal Solid Waste energy recovery. The idea of using more fuel sources, including MSW and agricultural residue biomass that may exist in a rural area, is explored. The model aims at optimizing the system specifications, such as the capacity of the base-load Waste-to-Energy facility, the capacity of the peak-load biomass boiler and the location of the facility. Furthermore, it defines the quantity of each potential fuel source that should be used annually, in order to maximize the financial yield of the investment. The results of an energy tri-generation case study application at a rural area of Greece, using mixed MSW and biomass, indicate positive financial yield of investment. In addition, a sensitivity analysis is performed on the effect of the most important parameters of the model on the optimum solution, pinpointing the parameters of interest rate, investment cost and heating oil price, as those requiring the attention of the decision makers. Finally, the sensitivity analysis is enhanced by a stochastic analysis to determine the effect of the volatility of parameters on the robustness of the model and the solution obtained.     

Production costs and operative margins in electric energy generation from biogas. Full-scale case studies in Italy

The purpose of this study was to observe the economic sustainability of three different biogas full scale plants, fed with different organic matrices: energy crops (EC), manure, agro-industrial (Plants B and C) and organic fraction of municipal solid waste (OFMSW) (Plant A). The plants were observed for one year and total annual biomass feeding, biomass composition and biomass cost (€ Mg^?1), initial investment cost and plant electric power production were registered. The unit costs of biogas and electric energy (€ Sm^?3_biogas, € kW h^?1_EE) were differently distributed, depending on the type of feed and plant. Plant A showed high management/maintenance cost for OFMSW treatment (0.155 € Sm^?3_biogas, 45% of total cost), Plant B suffered high cost for EC supply (0.130 € Sm^?3_biogas, 49% of total cost) and Plant C showed higher impact on the total costs because of the depreciation charge (0.146 € Sm^?3_biogas, 41% of total costs). The breakeven point for the tariff of electric energy, calculated for the different cases, resulted in the range 120–170 € MW h^?1_EE, depending on fed materials and plant scale. EC had great impact on biomass supply costs and should be reduced, in favor of organic waste and residues; plant scale still heavily influences the production costs. The EU States should drive incentives in dependence of these factors, to further develop this still promising sector.     

At home and abroad: An empirical analysis of innovation and diffusion in energy technologies

This paper contributes to the induced innovation literature by extending the analysis of supply and demand determinants of innovation in energy technologies to account for international knowledge flows and spillovers. We select a sample of 38 innovating countries and study how knowledge related to energy-efficient and environmentally friendly technologies flows across geographical and technological space. We demonstrate that higher geographical and technological distances are associated with lower probabilities of knowledge flow. Next, we use previous estimates to construct internal and external knowledge stocks for a panel of 17 countries. We then present an econometric analysis of the supply and demand determinants of innovation accounting for international knowledge spillovers. Our results confirm the role of demand-pull effects, proxied by energy prices, and of technological opportunity, proxied by the knowledge stocks. Our results show that spillovers between countries have a significant positive impact on further innovation in energy-efficient and environmentally friendly technologies.     

基于LMDI方法的广东省生活能源消费影响因素分析

运用对数平均迪氏分解法(LMDI)构建广东省生活能源消费的因素分解模型,定量分析2000~2014年间能源结构、人口规模、居住面积和设备消费等因素的变化对生活能源消费的影响。研究发现,4种因素的累计效应均为正,而采用逐年效应角度观察,设备消费是生活能源消费增加的最大拉动因素,其次为居住面积。基于研究结果,提出降低居民生活能源消费的相关政策建议。