Agglomeration and removal characteristics of fine particles from coal combustion under different turbulent flow fields

Turbulent agglomeration is a promising pretreatment technology for improving the removal of fine particles in industrial flue gas,which can improve the particle removal effect of dust removal equipment safely and economically.However,due to the complexity of turbulence mechanisms,the relationship between turbulent flow fields and the agglomeration of fine particles is not known with precision,resulting a weak promotion effect for particle removal with this pretreatment technology.In this work,th...     

A human embryonic stem cell-based in vitro model revealed that ultrafine carbon particles may cause skin inflammation and psoriasis

Air pollution has been linked to many health issues,including skin conditions,especially in children.Among all the atmospheric pollutants,ultrafine particles have been deemed very dangerous since they can readily penetrate the lungs and skin,and be absorbed into the bloodstream.Here,we employed a human embryonic stem cell(h ESC)-based differentiation system towards keratinocytes,to test the effects of ultrafine carbon particles,which mimic ambient ultrafine particles,at environment related conce...     

不同浓度臭氧对单颗粒气溶胶化学组成的影响

为探讨高浓度臭氧(O₃)对气溶胶生成与老化过程的影响,本研究利用单颗粒气溶胶质谱仪(SPAMS)于2018年10月在广东省鹤山大气环境超级监测站进行观测.观测期间根据O₃浓度的高低,定义了高臭氧浓度(P_H)时段和低臭氧浓度(P_L)时段,其中P_H时段O₃平均浓度为117μg·m^-3,P_L时段平均浓度为25μg·m^-3.依据化学组成的不同,观测期间单颗粒主要包含老化元素碳颗粒(EC-aged)、二次颗粒(Sec)和老化有机碳颗粒(OC-aged).P_H时段单颗粒总数(348 085)高于P_L时段(224 797),且P_H时段Sec颗粒(37.1%)的占比显著高于P_L时段(27.8%),而EC-aged颗粒(32.1%)则低于P_L时段(44.1%),OC-aged颗粒(13.5%)略高于P...     

主要气象因素对可吸入颗粒物浓度影响规律探讨

简要介绍了上海、南京、苏州和南通市区API污染指数逐月同步走向的一致性,得出环境空气质量保护目标确定条件下,影响大气污染物浓度高低的主要因素是大中尺度天气系统的气象因素以及春、夏、秋、冬和典型冬季寒潮前后,南通市区可吸入颗粒物与气象因素之间的相关变化关系.说明在政府加大力度控制大气污染物排放量并取得阶段性成果时,另一个影响可吸入颗粒物浓度高低变化的重要因素是气象因素.     

环境空气中的邻苯二甲酸酯类的测定

研究制作了半挥发性有机物中流量采样装置,将环境空气(包括气相和颗粒物)中的半挥发性有机物采集到超细玻璃纤维滤膜及其后面的吸附剂上,用乙醚/正己烷混合溶剂提取,提取液经硅胶柱净化后,用反相液相色谱分离测定邻苯二甲酸酯类.并对色谱分离条件、样品净化方式、目标化合物在气相和颗粒物上的分布规律及采样器的捕集效率进行了实验.     

排水管道内不同粒径沉积颗粒物冲刷率的分析与计算

为探究和量化在水流冲刷下,排水管道中不同粒径颗粒物冲刷沉积的过程,本文模拟排水管道内沉积颗粒的冲刷过程.冲刷过程中,粒径较小的悬移质颗粒(小于0.1 mm),在管道沿线取样测得水流中悬浮固体质量浓度(SS);粒径较大的推移质颗粒(0.1-2 mm),测得管道沿线不同位置沉积的颗粒质量.并建立两个数学模型分别计算排水管道...     

干气溶胶复折射率的参数化方案

基于成都市2017年10～12月WS600一体式气象站、AURORA-3000积分浊度计、AE-31黑碳仪以及GRIMM180环境颗粒物监测仪的地面逐时观测数据,结合Mie散射理论数值改进算法与免疫进化算法反演了550rnm波长处干气溶胶复折射率(DACRI)的实部(nre和虚部(ni).通过分析DACRI反演结果与颗...     

Coupling magnetic particles with flocculants to enhance demulsification and separation of waste cutting emulsion for engineering applications

Magnetic particles were coupled with a flocculant to enhance the demulsification and separation of waste cutting emulsions. The optimal magnetic particle size and critical magnetic field conditions were investigated to achieve large-scale engineering application of magnetic demulsification separation for waste cutting emulsion treatment. The micro-scale magnetic particles were found to show comparable effects to nano-scale magnetic particles on enhancing the demulsification and separation of cutting emulsions, which are beneficial for broadening the selectivity of low-cost magnetic particles. The critical magnetic separation region was determined to be an area 40 mm from the magnetic field source. Compared to the flocculant demulsification, the magnetic demulsification separation exhibited a significant advantage in accelerating flocs–water separation by decreasing the separation time of flocs from 180–240 min to less than 15 min, compressing the flocs by reducing the floc volume ratio from 60%–90% to lower than 20%, and showing excellent adaptability to the variable properties of waste cutting emulsions. Coupled with the design of the magnetic disk separator, continuous demulsification separation of the waste cutting emulsion was achieved at 1.0 t/hr for at least 10 hr to obtain clear effluent with 81% chemical oxygen demand removal and 89% turbidity reduction. This study demonstrates the feasibility of applying magnetic demulsification separation to large-scale continuous treatment of waste emulsion. Moreover, it addresses the flocs–water separation problems that occur in practical flocculant demulsification engineering applications.     

添加硬硅钙石二次粒子培养颗粒污泥及其对处理含铅废水的影响研究

硬硅钙石二次粒子培养颗粒污泥并用于处理含铅废水进行了实验研究。结果表明 ,硬硅钙石二次粒子利于培养出高活性的颗粒污泥 ,颗粒污泥对含铅废水具有较高的去除能力 ,铅的去除率在 90 %以上。颗粒污泥的活性、温度和废水的含铅浓度是影响处理的主要因素 ,对其去除机理进行了分析。颗粒污泥处理Pb2 + ≤ 10 0mg/L的含铅试水 ,处理后的铅浓度达到排放标准。     

活性炭颗粒对超细颗粒物的过滤性能

UFPs(超细颗粒物)对人体危害较大且难以脱除,但活性炭颗粒床利用多孔结构可以提高其过滤效率. 为探究试验条件对UFPs过滤效率的影响以及活性炭孔隙结构和UFPs过滤效率之间的关系,以实验室发生UFPs为研究对象,活性炭为过滤介质,对活性炭颗粒粒径、滤层厚度以及表观风速等条件对过滤UFPs的影响进行了研究,并通过对比过滤前后活性炭的孔径分布,分析活性炭多孔性与UFPs的关系. 结果表明:当活性炭颗粒平均粒径由2.50 mm减至0.45 mm、滤层厚度由20 mm增至100 mm、表观过滤风速由4.25 cm/s降至0.84 cm/s时,总过滤效率分别由41.87%、49.39%、68.24%升至86.27%、89.29%、83.04%;但从活性炭的单颗粒过滤效率和过滤质量角度来看,在活性炭颗粒粒径大、滤层厚度小、表观过滤风速低的条件下,更有利于单个活性炭颗粒的过滤作用的发挥;当UFPs粒径小于14.3 nm时,UFPs发生“热反弹”效应,并且主要过滤机理是扩散效应,但随着UFPs粒径增大,拦截和惯性碰撞对过滤效率的作用增强;活性炭500 nm以下的孔隙结构对脱除UFPs起着重要作用. 研究显示,选择含有更多500 nm以下孔隙的多孔材料更有利于过滤UFPs.